Revision: 2183
http://nagiosplug.svn.sourceforge.net/nagiosplug/?rev=2183&view=rev
Author: dermoth
Date: 2009-03-24 05:52:15 +0000 (Tue, 24 Mar 2009)
Log Message:
-----------
Whitespace and intend cleanup
From: Thomas Guyot-Sionnest <[email protected]>
Modified Paths:
--------------
nagiosplug/trunk/plugins/check_nt.c
Modified: nagiosplug/trunk/plugins/check_nt.c
===================================================================
--- nagiosplug/trunk/plugins/check_nt.c 2009-03-21 06:58:28 UTC (rev 2182)
+++ nagiosplug/trunk/plugins/check_nt.c 2009-03-24 05:52:15 UTC (rev 2183)
@@ -160,9 +160,9 @@
/* loop until one of the parameters is wrong or not present */
while (lvalue_list[0+offset]> (unsigned long)0 &&
- lvalue_list[0+offset]<=(unsigned long)17280 &&
+ lvalue_list[0+offset]<=(unsigned long)17280 &&
lvalue_list[1+offset]> (unsigned long)0 &&
- lvalue_list[1+offset]<=(unsigned long)100 &&
+ lvalue_list[1+offset]<=(unsigned long)100 &&
lvalue_list[2+offset]> (unsigned long)0 &&
lvalue_list[2+offset]<=(unsigned long)100) {
@@ -171,7 +171,7 @@
fetch_data (server_address, server_port, send_buffer);
utilization=strtoul(recv_buffer,NULL,10);
-
+
/* Check if any of the request is in a warning or critical state */
if(utilization >= lvalue_list[2+offset])
return_code=STATE_CRITICAL;
@@ -191,7 +191,7 @@
perfdata = temp_string_perf;
} else
output_message = strdup (_("not enough values for -l parameters"));
- }
+ }
break;
case CHECK_UPTIME:
@@ -199,7 +199,7 @@
asprintf(&send_buffer, "%s&3", req_password);
fetch_data (server_address, server_port, send_buffer);
uptime=strtoul(recv_buffer,NULL,10);
- updays = uptime / 86400;
+ updays = uptime / 86400;
uphours = (uptime % 86400) / 3600;
upminutes = ((uptime % 86400) % 3600) / 60;
asprintf(&output_message,_("System Uptime - %u day(s) %u hour(s) %u minute(s)"),updays,uphours, upminutes);
@@ -237,9 +237,9 @@
if(check_critical_value==TRUE && percent_used_space >= critical_value)
return_code=STATE_CRITICAL;
else if (check_warning_value==TRUE && percent_used_space >= warning_value)
- return_code=STATE_WARNING;
+ return_code=STATE_WARNING;
else
- return_code=STATE_OK;
+ return_code=STATE_OK;
output_message = strdup (temp_string);
perfdata = temp_string_perf;
@@ -267,7 +267,7 @@
break;
case CHECK_MEMUSE:
-
+
asprintf(&send_buffer,"%s&7", req_password);
fetch_data (server_address, server_port, send_buffer);
mem_commitLimit=atof(strtok(recv_buffer,"&"));
@@ -276,130 +276,129 @@
warning_used_space = ((float)warning_value / 100) * mem_commitLimit;
critical_used_space = ((float)critical_value / 100) * mem_commitLimit;
- /* Divisor should be 1048567, not 3044515, as we are measuring "Commit Charge" here,
+ /* Divisor should be 1048567, not 3044515, as we are measuring "Commit Charge" here,
which equals RAM + Pagefiles. */
- asprintf(&output_message,_("Memory usage: total:%.2f Mb - used: %.2f Mb (%.0f%%) - free: %.2f Mb (%.0f%%)"),
- mem_commitLimit / 1048567, mem_commitByte / 1048567, percent_used_space,
+ asprintf(&output_message,_("Memory usage: total:%.2f Mb - used: %.2f Mb (%.0f%%) - free: %.2f Mb (%.0f%%)"),
+ mem_commitLimit / 1048567, mem_commitByte / 1048567, percent_used_space,
(mem_commitLimit - mem_commitByte) / 1048567, (mem_commitLimit - mem_commitByte) / mem_commitLimit * 100);
asprintf(&perfdata,_("'Memory usage'=%.2fMb;%.2f;%.2f;0.00;%.2f"), mem_commitByte / 1048567,
warning_used_space / 1048567, critical_used_space / 1048567, mem_commitLimit / 1048567);
-
+
return_code=STATE_OK;
if(check_critical_value==TRUE && percent_used_space >= critical_value)
return_code=STATE_CRITICAL;
else if (check_warning_value==TRUE && percent_used_space >= warning_value)
- return_code=STATE_WARNING;
+ return_code=STATE_WARNING;
break;
case CHECK_COUNTER:
- /*
+ /*
CHECK_COUNTER has been modified to provide extensive perfdata information.
- In order to do this, some modifications have been done to the code
- and some constraints have been introduced.
-
- 1) For the sake of simplicity of the code, perfdata information will only be
- provided when the "description" field is added.
-
- 2) If the counter you're going to measure is percent-based, the code will detect
- the percent sign in its name and will attribute minimum (0%) and maximum (100%)
- values automagically, as well the \xA8%" sign to graph units.
+ In order to do this, some modifications have been done to the code
+ and some constraints have been introduced.
- 3) OTOH, if the counter is "absolute", you'll have to provide the following
- the counter unit - that is, the dimensions of the counter you're getting. Examples:
- pages/s, packets transferred, etc.
+ 1) For the sake of simplicity of the code, perfdata information will only be
+ provided when the "description" field is added.
- 4) If you want, you may provide the minimum and maximum values to expect. They aren't mandatory,
- but once specified they MUST have the same order of magnitude and units of -w and -c; otherwise.
- strange things will happen when you make graphs of your data.
+ 2) If the counter you're going to measure is percent-based, the code will detect
+ the percent sign in its name and will attribute minimum (0%) and maximum (100%)
+ values automagically, as well the \xA8%" sign to graph units.
+
+ 3) OTOH, if the counter is "absolute", you'll have to provide the following
+ the counter unit - that is, the dimensions of the counter you're getting. Examples:
+ pages/s, packets transferred, etc.
+
+ 4) If you want, you may provide the minimum and maximum values to expect. They aren't mandatory,
+ but once specified they MUST have the same order of magnitude and units of -w and -c; otherwise.
+ strange things will happen when you make graphs of your data.
*/
- if (value_list == NULL)
+ if (value_list == NULL)
output_message = strdup (_("No counter specified"));
- else
+ else
{
- preparelist (value_list); /* replace , between services with & to send the request */
- isPercent = (strchr (value_list, '%') != NULL);
+ preparelist (value_list); /* replace , between services with & to send the request */
+ isPercent = (strchr (value_list, '%') != NULL);
- strtok (value_list, "&"); /* burn the first parameters */
- description = strtok (NULL, "&");
- counter_unit = strtok (NULL, "&");
- asprintf (&send_buffer, "%s&8&%s", req_password, value_list);
- fetch_data (server_address, server_port, send_buffer);
- counter_value = atof (recv_buffer);
+ strtok (value_list, "&"); /* burn the first parameters */
+ description = strtok (NULL, "&");
+ counter_unit = strtok (NULL, "&");
+ asprintf (&send_buffer, "%s&8&%s", req_password, value_list);
+ fetch_data (server_address, server_port, send_buffer);
+ counter_value = atof (recv_buffer);
+ if (description == NULL)
+ asprintf (&output_message, "%.f", counter_value);
+ else if (isPercent)
+ {
+ counter_unit = strdup ("%");
+ allRight = TRUE;
+ }
- if (description == NULL)
- asprintf (&output_message, "%.f", counter_value);
- else if (isPercent)
- {
- counter_unit = strdup ("%");
- allRight = TRUE;
- }
+ if ((counter_unit != NULL) && (!allRight))
+ {
+ minval = strtok (NULL, "&");
+ maxval = strtok (NULL, "&");
- if ((counter_unit != NULL) && (!allRight))
- {
- minval = strtok (NULL, "&");
- maxval = strtok (NULL, "&");
+ /* All parameters specified. Let's check the numbers */
- /* All parameters specified. Let's check the numbers */
+ fminval = (minval != NULL) ? strtod (minval, &errcvt) : -1;
+ fmaxval = (minval != NULL) ? strtod (maxval, &errcvt) : -1;
- fminval = (minval != NULL) ? strtod (minval, &errcvt) : -1;
- fmaxval = (minval != NULL) ? strtod (maxval, &errcvt) : -1;
-
- if ((fminval == 0) && (minval == errcvt))
+ if ((fminval == 0) && (minval == errcvt))
output_message = strdup (_("Minimum value contains non-numbers"));
- else
+ else
{
- if ((fmaxval == 0) && (maxval == errcvt))
- output_message = strdup (_("Maximum value contains non-numbers"));
- else
- allRight = TRUE; /* Everything is OK. */
+ if ((fmaxval == 0) && (maxval == errcvt))
+ output_message = strdup (_("Maximum value contains non-numbers"));
+ else
+ allRight = TRUE; /* Everything is OK. */
}
- }
- else if ((counter_unit == NULL) && (description != NULL))
- output_message = strdup (_("No unit counter specified"));
+ }
+ else if ((counter_unit == NULL) && (description != NULL))
+ output_message = strdup (_("No unit counter specified"));
- if (allRight)
- {
- /* Let's format the output string, finally... */
+ if (allRight)
+ {
+ /* Let's format the output string, finally... */
if (strstr(description, "%") == NULL) {
- asprintf (&output_message, "%s = %.2f %s", description, counter_value, counter_unit);
+ asprintf (&output_message, "%s = %.2f %s", description, counter_value, counter_unit);
} else {
/* has formatting, will segv if wrong */
- asprintf (&output_message, description, counter_value);
+ asprintf (&output_message, description, counter_value);
}
asprintf (&output_message, "%s |", output_message);
- asprintf (&output_message,"%s %s", output_message,
- fperfdata (description, counter_value,
+ asprintf (&output_message,"%s %s", output_message,
+ fperfdata (description, counter_value,
counter_unit, 1, warning_value, 1, critical_value,
- (!(isPercent) && (minval != NULL)), fminval,
- (!(isPercent) && (minval != NULL)), fmaxval));
- }
+ (!(isPercent) && (minval != NULL)), fminval,
+ (!(isPercent) && (minval != NULL)), fmaxval));
+ }
}
- if (critical_value > warning_value)
+ if (critical_value > warning_value)
{ /* Normal thresholds */
- if (check_critical_value == TRUE && counter_value >= critical_value)
- return_code = STATE_CRITICAL;
- else if (check_warning_value == TRUE && counter_value >= warning_value)
- return_code = STATE_WARNING;
- else
- return_code = STATE_OK;
+ if (check_critical_value == TRUE && counter_value >= critical_value)
+ return_code = STATE_CRITICAL;
+ else if (check_warning_value == TRUE && counter_value >= warning_value)
+ return_code = STATE_WARNING;
+ else
+ return_code = STATE_OK;
}
- else
+ else
{ /* inverse thresholds */
- return_code = STATE_OK;
- if (check_critical_value == TRUE && counter_value <= critical_value)
- return_code = STATE_CRITICAL;
- else if (check_warning_value == TRUE && counter_value <= warning_value)
- return_code = STATE_WARNING;
+ return_code = STATE_OK;
+ if (check_critical_value == TRUE && counter_value <= critical_value)
+ return_code = STATE_CRITICAL;
+ else if (check_warning_value == TRUE && counter_value <= warning_value)
+ return_code = STATE_WARNING;
}
- break;
-
+ break;
+
case CHECK_FILEAGE:
if (value_list==NULL)
@@ -411,27 +410,27 @@
age_in_minutes = atoi(strtok(recv_buffer,"&"));
description = strtok(NULL,"&");
output_message = strdup (description);
-
+
if (critical_value > warning_value) { /* Normal thresholds */
if(check_critical_value==TRUE && age_in_minutes >= critical_value)
return_code=STATE_CRITICAL;
else if (check_warning_value==TRUE && age_in_minutes >= warning_value)
- return_code=STATE_WARNING;
+ return_code=STATE_WARNING;
else
- return_code=STATE_OK;
+ return_code=STATE_OK;
}
else { /* inverse thresholds */
if(check_critical_value==TRUE && age_in_minutes <= critical_value)
return_code=STATE_CRITICAL;
else if (check_warning_value==TRUE && age_in_minutes <= warning_value)
- return_code=STATE_WARNING;
+ return_code=STATE_WARNING;
else
- return_code=STATE_OK;
+ return_code=STATE_OK;
}
}
break;
- case CHECK_INSTANCES:
+ case CHECK_INSTANCES:
if (value_list==NULL)
output_message = strdup (_("No counter specified"));
else {
@@ -441,7 +440,7 @@
printf("NSClient - %s\n",recv_buffer);
exit(STATE_UNKNOWN);
}
- asprintf(&output_message,"%s",recv_buffer);
+ asprintf(&output_message,"%s",recv_buffer);
return_code=STATE_OK;
}
break;
@@ -471,7 +470,7 @@
int option = 0;
static struct option longopts[] =
- {
+ {
{"port", required_argument,0,'p'},
{"timeout", required_argument,0,'t'},
{"critical", required_argument,0,'c'},
@@ -497,13 +496,13 @@
argc--;
}
- for (c=1;c<argc;c++) {
- if(strcmp("-to",argv[c])==0)
- strcpy(argv[c],"-t");
- else if (strcmp("-wv",argv[c])==0)
- strcpy(argv[c],"-w");
- else if (strcmp("-cv",argv[c])==0)
- strcpy(argv[c],"-c");
+ for (c=1;c<argc;c++) {
+ if(strcmp("-to",argv[c])==0)
+ strcpy(argv[c],"-t");
+ else if (strcmp("-wv",argv[c])==0)
+ strcpy(argv[c],"-w");
+ else if (strcmp("-cv",argv[c])==0)
+ strcpy(argv[c],"-c");
}
while (1) {
@@ -601,7 +600,7 @@
if(result!=STATE_OK)
die (result, _("could not fetch information from server\n"));
-
+
if (!strncmp(recv_buffer,"ERROR",5))
die (STATE_UNKNOWN, "NSClient - %s\n",recv_buffer);
}
@@ -613,15 +612,15 @@
for (idx=0;idx<MAX_VALUE_LIST;idx++)
array[idx]=0;
-
+
idx=0;
for(t1 = strtok(string,delim);t1 != NULL; t1 = strtok(NULL, delim)) {
if (is_numeric(t1) && idx<MAX_VALUE_LIST) {
array[idx]=strtoul(t1,NULL,10);
idx++;
- } else
+ } else
return FALSE;
- }
+ }
return TRUE;
}
@@ -640,120 +639,121 @@
void print_help(void)
{
print_revision(progname, NP_VERSION);
-
+
printf ("Copyright (c) 2000 Yves Rubin ([email protected])\n");
printf (COPYRIGHT, copyright, email);
-
+
printf ("%s\n", _("This plugin collects data from the NSClient service running on a"));
- printf ("%s\n", _("Windows NT/2000/XP/2003 server."));
+ printf ("%s\n", _("Windows NT/2000/XP/2003 server."));
- printf ("\n\n");
+ printf ("\n\n");
print_usage();
-
- printf (_(UT_HELP_VRSN));
- printf (_(UT_EXTRA_OPTS));
- printf ("%s\n", _("Options:"));
- printf (" %s\n", "-H, --hostname=HOST");
- printf (" %s\n", _("Name of the host to check"));
- printf (" %s\n", "-p, --port=INTEGER");
- printf (" %s", _("Optional port number (default: "));
- printf ("%d)\n", PORT);
- printf (" %s\n", "-s, --secret=<password>");
- printf (" %s\n", _("Password needed for the request"));
- printf (" %s\n", "-w, --warning=INTEGER");
- printf (" %s\n", _("Threshold which will result in a warning status"));
- printf (" %s\n", "-c, --critical=INTEGER");
- printf (" %s\n", _("Threshold which will result in a critical status"));
- printf (" %s\n", "-t, --timeout=INTEGER");
- printf (" %s", _("Seconds before connection attempt times out (default: "));
- printf (" %s\n", "-l, --params=<parameters>");
- printf (" %s", _("Parameters passed to specified check (see below)"));
- printf (" %s\n", "-d, --display={SHOWALL}");
- printf (" %s", _("Display options (currently only SHOWALL works)"));
- printf ("%d)\n", DEFAULT_SOCKET_TIMEOUT);
- printf (" %s\n", "-h, --help");
- printf (" %s\n", _("Print this help screen"));
- printf (" %s\n", "-V, --version");
- printf (" %s\n", _("Print version information"));
- printf (" %s\n", "-v, --variable=STRING");
- printf (" %s\n\n", _("Variable to check"));
- printf ("%s\n", _("Valid variables are:"));
- printf (" %s", "CLIENTVERSION =");
- printf (" %s\n", _("Get the NSClient version"));
- printf (" %s\n", _("If -l <version> is specified, will return warning if versions differ."));
- printf (" %s\n", "CPULOAD =");
- printf (" %s\n", _("Average CPU load on last x minutes."));
- printf (" %s\n", _("Request a -l parameter with the following syntax:"));
- printf (" %s\n", _("-l <minutes range>,<warning threshold>,<critical threshold>."));
- printf (" %s\n", _("<minute range> should be less than 24*60."));
- printf (" %s\n", _("Thresholds are percentage and up to 10 requests can be done in one shot."));
- printf (" %s\n", "ie: -l 60,90,95,120,90,95");
- printf (" %s\n", "UPTIME =");
- printf (" %s\n", _("Get the uptime of the machine."));
- printf (" %s\n", _("No specific parameters. No warning or critical threshold"));
- printf (" %s\n", "USEDDISKSPACE =");
- printf (" %s\n", _("Size and percentage of disk use."));
- printf (" %s\n", _("Request a -l parameter containing the drive letter only."));
- printf (" %s\n", _("Warning and critical thresholds can be specified with -w and -c."));
- printf (" %s\n", "MEMUSE =");
- printf (" %s\n", _("Memory use."));
- printf (" %s\n", _("Warning and critical thresholds can be specified with -w and -c."));
- printf (" %s\n", "SERVICESTATE =");
- printf (" %s\n", _("Check the state of one or several services."));
- printf (" %s\n", _("Request a -l parameters with the following syntax:"));
- printf (" %s\n", _("-l <service1>,<service2>,<service3>,..."));
- printf (" %s\n", _("You can specify -d SHOWALL in case you want to see working services"));
- printf (" %s\n", _("in the returned string."));
- printf (" %s\n", "PROCSTATE =");
- printf (" %s\n", _("Check if one or several process are running."));
- printf (" %s\n", _("Same syntax as SERVICESTATE."));
- printf (" %s\n", "COUNTER =");
- printf (" %s\n", _("Check any performance counter of Windows NT/2000."));
- printf (" %s\n", _("Request a -l parameters with the following syntax:"));
- printf (" %s\n", _("-l \"\\\\<performance object>\\\\counter\",\"<description>"));
- printf (" %s\n", _("The <description> parameter is optional and is given to a printf "));
- printf (" %s\n", _("output command which requires a float parameter."));
- printf (" %s\n", _("If <description> does not include \"%%\", it is used as a label."));
- printf (" %s\n", _("Some examples:"));
- printf (" %s\n", "\"Paging file usage is %%.2f %%%%\"");
- printf (" %s\n", "\"%%.f %%%% paging file used.\"");
- printf (" %s\n", "INSTANCES =");
- printf (" %s\n", _("Check any performance counter object of Windows NT/2000."));
- printf (" %s\n", _("Syntax: check_nt -H <hostname> -p <port> -v INSTANCES -l <counter object>"));
- printf (" %s\n", _("<counter object> is a Windows Perfmon Counter object (eg. Process),"));
- printf (" %s\n", _("if it is two words, it should be enclosed in quotes"));
- printf (" %s\n", _("The returned results will be a comma-separated list of instances on "));
- printf (" %s\n", _(" the selected computer for that object."));
- printf (" %s\n", _("The purpose of this is to be run from command line to determine what instances"));
- printf (" %s\n", _(" are available for monitoring without having to log onto the Windows server"));
- printf (" %s\n", _(" to run Perfmon directly."));
- printf (" %s\n", _("It can also be used in scripts that automatically create Nagios service"));
- printf (" %s\n", _(" configuration files."));
- printf (" %s\n", _("Some examples:"));
- printf (" %s\n\n", _("check_nt -H 192.168.1.1 -p 1248 -v INSTANCES -l Process"));
+ printf (_(UT_HELP_VRSN));
+ printf (_(UT_EXTRA_OPTS));
- printf ("%s\n", _("Notes:"));
- printf (" %s\n", _("- The NSClient service should be running on the server to get any information"));
- printf (" %s\n", "(http://nsclient.ready2run.nl).");
- printf (" %s\n", _("- Critical thresholds should be lower than warning thresholds"));
- printf (" %s\n", _("- Default port 1248 is sometimes in use by other services. The error"));
- printf (" %s\n", _("output when this happens contains \"Cannot map xxxxx to protocol number\"."));
- printf (" %s\n", _("One fix for this is to change the port to something else on check_nt "));
- printf (" %s\n", _("and on the client service it\'s connecting to."));
+ printf ("%s\n", _("Options:"));
+ printf (" %s\n", "-H, --hostname=HOST");
+ printf (" %s\n", _("Name of the host to check"));
+ printf (" %s\n", "-p, --port=INTEGER");
+ printf (" %s", _("Optional port number (default: "));
+ printf ("%d)\n", PORT);
+ printf (" %s\n", "-s, --secret=<password>");
+ printf (" %s\n", _("Password needed for the request"));
+ printf (" %s\n", "-w, --warning=INTEGER");
+ printf (" %s\n", _("Threshold which will result in a warning status"));
+ printf (" %s\n", "-c, --critical=INTEGER");
+ printf (" %s\n", _("Threshold which will result in a critical status"));
+ printf (" %s\n", "-t, --timeout=INTEGER");
+ printf (" %s", _("Seconds before connection attempt times out (default: "));
+ printf (" %s\n", "-l, --params=<parameters>");
+ printf (" %s", _("Parameters passed to specified check (see below)"));
+ printf (" %s\n", "-d, --display={SHOWALL}");
+ printf (" %s", _("Display options (currently only SHOWALL works)"));
+ printf ("%d)\n", DEFAULT_SOCKET_TIMEOUT);
+ printf (" %s\n", "-h, --help");
+ printf (" %s\n", _("Print this help screen"));
+ printf (" %s\n", "-V, --version");
+ printf (" %s\n", _("Print version information"));
+ printf (" %s\n", "-v, --variable=STRING");
+ printf (" %s\n\n", _("Variable to check"));
+ printf ("%s\n", _("Valid variables are:"));
+ printf (" %s", "CLIENTVERSION =");
+ printf (" %s\n", _("Get the NSClient version"));
+ printf (" %s\n", _("If -l <version> is specified, will return warning if versions differ."));
+ printf (" %s\n", "CPULOAD =");
+ printf (" %s\n", _("Average CPU load on last x minutes."));
+ printf (" %s\n", _("Request a -l parameter with the following syntax:"));
+ printf (" %s\n", _("-l <minutes range>,<warning threshold>,<critical threshold>."));
+ printf (" %s\n", _("<minute range> should be less than 24*60."));
+ printf (" %s\n", _("Thresholds are percentage and up to 10 requests can be done in one shot."));
+ printf (" %s\n", "ie: -l 60,90,95,120,90,95");
+ printf (" %s\n", "UPTIME =");
+ printf (" %s\n", _("Get the uptime of the machine."));
+ printf (" %s\n", _("No specific parameters. No warning or critical threshold"));
+ printf (" %s\n", "USEDDISKSPACE =");
+ printf (" %s\n", _("Size and percentage of disk use."));
+ printf (" %s\n", _("Request a -l parameter containing the drive letter only."));
+ printf (" %s\n", _("Warning and critical thresholds can be specified with -w and -c."));
+ printf (" %s\n", "MEMUSE =");
+ printf (" %s\n", _("Memory use."));
+ printf (" %s\n", _("Warning and critical thresholds can be specified with -w and -c."));
+ printf (" %s\n", "SERVICESTATE =");
+ printf (" %s\n", _("Check the state of one or several services."));
+ printf (" %s\n", _("Request a -l parameters with the following syntax:"));
+ printf (" %s\n", _("-l <service1>,<service2>,<service3>,..."));
+ printf (" %s\n", _("You can specify -d SHOWALL in case you want to see working services"));
+ printf (" %s\n", _("in the returned string."));
+ printf (" %s\n", "PROCSTATE =");
+ printf (" %s\n", _("Check if one or several process are running."));
+ printf (" %s\n", _("Same syntax as SERVICESTATE."));
+ printf (" %s\n", "COUNTER =");
+ printf (" %s\n", _("Check any performance counter of Windows NT/2000."));
+ printf (" %s\n", _("Request a -l parameters with the following syntax:"));
+ printf (" %s\n", _("-l \"\\\\<performance object>\\\\counter\",\"<description>"));
+ printf (" %s\n", _("The <description> parameter is optional and is given to a printf "));
+ printf (" %s\n", _("output command which requires a float parameter."));
+ printf (" %s\n", _("If <description> does not include \"%%\", it is used as a label."));
+ printf (" %s\n", _("Some examples:"));
+ printf (" %s\n", "\"Paging file usage is %%.2f %%%%\"");
+ printf (" %s\n", "\"%%.f %%%% paging file used.\"");
+ printf (" %s\n", "INSTANCES =");
+ printf (" %s\n", _("Check any performance counter object of Windows NT/2000."));
+ printf (" %s\n", _("Syntax: check_nt -H <hostname> -p <port> -v INSTANCES -l <counter object>"));
+ printf (" %s\n", _("<counter object> is a Windows Perfmon Counter object (eg. Process),"));
+ printf (" %s\n", _("if it is two words, it should be enclosed in quotes"));
+ printf (" %s\n", _("The returned results will be a comma-separated list of instances on "));
+ printf (" %s\n", _(" the selected computer for that object."));
+ printf (" %s\n", _("The purpose of this is to be run from command line to determine what instances"));
+ printf (" %s\n", _(" are available for monitoring without having to log onto the Windows server"));
+ printf (" %s\n", _(" to run Perfmon directly."));
+ printf (" %s\n", _("It can also be used in scripts that automatically create Nagios service"));
+ printf (" %s\n", _(" configuration files."));
+ printf (" %s\n", _("Some examples:"));
+ printf (" %s\n\n", _("check_nt -H 192.168.1.1 -p 1248 -v INSTANCES -l Process"));
+
+ printf ("%s\n", _("Notes:"));
+ printf (" %s\n", _("- The NSClient service should be running on the server to get any information"));
+ printf (" %s\n", "(http://nsclient.ready2run.nl).");
+ printf (" %s\n", _("- Critical thresholds should be lower than warning thresholds"));
+ printf (" %s\n", _("- Default port 1248 is sometimes in use by other services. The error"));
+ printf (" %s\n", _("output when this happens contains \"Cannot map xxxxx to protocol number\"."));
+ printf (" %s\n", _("One fix for this is to change the port to something else on check_nt "));
+ printf (" %s\n", _("and on the client service it\'s connecting to."));
#ifdef NP_EXTRA_OPTS
- printf (" -%s", _(UT_EXTRA_OPTS_NOTES));
+ printf (" -%s", _(UT_EXTRA_OPTS_NOTES));
#endif
- printf (_(UT_SUPPORT));
+ printf (_(UT_SUPPORT));
}
void print_usage(void)
{
- printf (_("Usage:"));
+ printf (_("Usage:"));
printf ("%s -H host -v variable [-p port] [-w warning] [-c critical]\n",progname);
- printf ("[-l params] [-d SHOWALL] [-t timeout]\n");
+ printf ("[-l params] [-d SHOWALL] [-t timeout]\n");
}
+
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.