Re: ENC: Hosts Nagios 3.2.3

bota essa linha lá no nagios.cfg

cfg_dir=/usr/local/nagios/etc/servers

e dentro da pasta cria os arqs. ".cfg" tipo win.cfg lin.cfg server.cf, 
etc... com os hosts definitions, services, hostgroups, etc...

Att.:

José Ednaldo Alves Dias
Téc. Correios Pl.
Subsede-PB/NTIC-01/GEOR/CESEP
452-3504
[email protected]


Em 19-04-2011 14:06, Marcos escreveu:
> Olá Senhores,
> Estou começando a monitorar minha rede com o nagios e estou apanhando muito.
> Os tutoriais que eu acho são de versões diferentes e pelo que entendi o
> Nagios 3.2.3 mesclou vários arquivos em um só.
>
> Os routers eu consegui inserir e já estão sendo monitorados sem problema.
> Os hosts win e Linux não estou conseguindo
>
>
> Eu edito o arquivos Windows.cfg
>
> Coloco ele da seguitne forma:
>
> ############################################################################
> ###
> # WINDOWS.CFG - SAMPLE CONFIG FILE FOR MONITORING A WINDOWS MACHINE
> #
> # Last Modified: 06-13-2007
> #
> # NOTES: This config file assumes that you are using the sample
> configuration
> #             files that get installed with the Nagios quickstart guide.
> #
> ############################################################################
> ###
>
>
>
>
> ############################################################################
> ###
> ############################################################################
> ###
> #
> # HOST DEFINITIONS
> #
> ############################################################################
> ###
> ############################################################################
> ###
>
> # Define a host for the Windows machine we'll be monitoring
> # Change the host_name, alias, and address to fit your situation
>
> define host{
>                  use                        windows-server              ;
> Inherit default values from a template
>                  host_name        serverdb ; The name we're giving to this
> host
>                  alias                       Servidor de Arquivos     ; A
> longer name associated with the host
>                  address                               192.168.0.3         ;
> IP address of the host
>                  }
>
>
>
>
> ############################################################################
> ###
> ############################################################################
> ###
> #
> # HOST GROUP DEFINITIONS
> #
> ############################################################################
> ###
> ############################################################################
> ###
>
>
> # Define a hostgroup for Windows machines
> # All hosts that use the windows-server template will automatically be a
> member of this group
>
> define hostgroup{
>                  hostgroup_name            windows-servers            ; The
> name of the hostgroup
>                  alias                       Windows Servers            ;
> Long name of the group
>                  }
>
>
>
>
> ############################################################################
> ###
> ############################################################################
> ###
> #
> # SERVICE DEFINITIONS
> #
> ############################################################################
> ###
> ############################################################################
> ###
>
>
> # Create a service for monitoring the version of NSCLient++ that is
> installed
> # Change the host_name to match the name of the host you defined above
>
> define service{
>                  use                                        generic-service
>                  host_name                        serverdb
>                  service_description       NSClient++ Version
>                  check_command
> check_nt!CLIENTVERSION
>                  }
>
>
>
> # Create a service for monitoring the uptime of the server
> # Change the host_name to match the name of the host you defined above
>
> define service{
>                  use                                        generic-service
>                  host_name                        serverdb
>                  service_description       Uptime
>                  check_command                            check_nt!UPTIME
>                  }
>
>
>
> # Create a service for monitoring CPU load
> # Change the host_name to match the name of the host you defined above
>
> define service{
>                  use                                        generic-service
>                  host_name                        serverdb
>                  service_description       CPU Load
>                  check_command                            check_nt!CPULOAD!-l
> 5,80,90
>                  }
>
>
>
> # Create a service for monitoring memory usage
> # Change the host_name to match the name of the host you defined above
>
> define service{
>                  use                                        generic-service
>                  host_name                        serverdb
>                  service_description       Memory Usage
>                  check_command                            check_nt!MEMUSE!-w
> 80 -c 90
>                  }
>
>
>
> # Create a service for monitoring C:\ disk usage
> # Change the host_name to match the name of the host you defined above
>
> define service{
>                  use                                        generic-service
>                  host_name                        serverdb
>                  service_description       C:\ Drive Space
>                  check_command
> check_nt!USEDDISKSPACE!-l c -w 80 -c 90
>                  }
>
>
>
> # Create a service for monitoring the W3SVC service
> # Change the host_name to match the name of the host you defined above
>
> define service{
>                  use                                        generic-service
>                  host_name                        serverdb
>                  service_description       W3SVC
>                  check_command
> check_nt!SERVICESTATE!-d SHOWALL -l W3SVC
>                  }
>
>
>
> # Create a service for monitoring the Explorer.exe process
> # Change the host_name to match the name of the host you defined above
>
> define service{
>                  use                                        generic-service
>                  host_name                        serverdb
>                  service_description       Explorer
>                  check_command
> check_nt!PROCSTATE!-d SHOWALL -l Explorer.exe
>                  }
>
>
>
> E a monitoração de um host funciona perfeitamente, mas ao adicionar o
> segundo o programa para. Vejam só como eu estou colocando
>
> ############################################################################
> ###
> # WINDOWS.CFG - SAMPLE CONFIG FILE FOR MONITORING A WINDOWS MACHINE
> #
> # Last Modified: 06-13-2007
> #
> # NOTES: This config file assumes that you are using the sample
> configuration
> #             files that get installed with the Nagios quickstart guide.
> #
> ############################################################################
> ###
>
>
>
>
> ############################################################################
> ###
> ############################################################################
> ###
> #
> # HOST DEFINITIONS
> #
> ############################################################################
> ###
> ############################################################################
> ###
>
> # Define a host for the Windows machine we'll be monitoring
> # Change the host_name, alias, and address to fit your situation
>
> define host{
>                  use                        windows-server              ;
> Inherit default values from a template
>                  host_name        serverdb ; The name we're giving to this
> host
>                  alias                       Servidor de Arquivos     ; A
> longer name associated with the host
>                  address                               192.168.0.x         ;
> IP address of the host
>                  }
>
>
> define host{
>                  use                        windows-server              ;
> Inherit default values from a template
>                  host_name        SERVER_TS_B1; The name we're giving to this
> host
>                  alias                       Servidor de Arquivos     ; A
> longer name associated with the host
>                  address                               192.168.0.xx      ; IP
> address of the host
>                  }
>
>
> ############################################################################
> ###
> ############################################################################
> ###
> #
> # HOST GROUP DEFINITIONS
> #
> ############################################################################
> ###
> ############################################################################
> ###
>
>
> # Define a hostgroup for Windows machines
> # All hosts that use the windows-server template will automatically be a
> member of this group
>
> define hostgroup{
>                  hostgroup_name            windows-servers            ; The
> name of the hostgroup
>                  alias                       Windows Servers            ;
> Long name of the group
>                  }
>
>
>
>
> ############################################################################
> ###
> ############################################################################
> ###
> #
> # SERVICE DEFINITIONS
> #
> ############################################################################
> ###
> ############################################################################
> ###
>
>
> # Create a service for monitoring the version of NSCLient++ that is
> installed
> # Change the host_name to match the name of the host you defined above
>
> define service{
>                  use                                        generic-service
>                  host_name                        serverdb
>                  service_description       NSClient++ Version
>                  check_command
> check_nt!CLIENTVERSION
>                  }
>
> define service{
>                  use                                        generic-service
>                  host_name                        SERVER_TS_B1
>                  service_description       NSClient++ Version
>                  check_command
> check_nt!CLIENTVERSION
>                  }
>
>
>
> # Create a service for monitoring the uptime of the server
> # Change the host_name to match the name of the host you defined above
>
> define service{
>                  use                                        generic-service
>                  host_name                        serverdb
>                  service_description       Uptime
>                  check_command                            check_nt!UPTIME
>                  }
>
> define service{
>                  use                                        generic-service
>                  host_name                        SERVER_TS_B1
>                  service_description       Uptime
>                  check_command                            check_nt!UPTIME
>                  }
>
>
> # Create a service for monitoring CPU load
> # Change the host_name to match the name of the host you defined above
>
> define service{
>                  use                                        generic-service
>                  host_name                        serverdb
>                  service_description       CPU Load
>                  check_command                            check_nt!CPULOAD!-l
> 5,80,90
>                  }
>
>
> define service{
>                  use                                        generic-service
>                  host_name                        SERVER_TS_B1
>                  service_description       CPU Load
>                  check_command                            check_nt!CPULOAD!-l
> 5,80,90
>                  }
>
> # Create a service for monitoring memory usage
> # Change the host_name to match the name of the host you defined above
>
> define service{
>                  use                                        generic-service
>                  host_name                        serverdb
>                  service_description       Memory Usage
>                  check_command                            check_nt!MEMUSE!-w
> 80 -c 90
>                  }
>
>
> define service{
>                  use                                        generic-service
>                  host_name                        SERVER_TS_B1
>                  service_description       Memory Usage
>                  check_command                            check_nt!MEMUSE!-w
> 80 -c 90
>                  }
>
>
>
> # Create a service for monitoring C:\ disk usage
> # Change the host_name to match the name of the host you defined above
>
> define service{
>                  use                                        generic-service
>                  host_name                        serverdb
>                  service_description       C:\ Drive Space
>                  check_command
> check_nt!USEDDISKSPACE!-l c -w 80 -c 90
>                  }
>
> define service{
>                  use                                        generic-service
>                  host_name                        SERVER_TS_B1
>                  service_description       C:\ Drive Space
>                  check_command
> check_nt!USEDDISKSPACE!-l c -w 80 -c 90
>                  }
>
> # Create a service for monitoring the W3SVC service
> # Change the host_name to match the name of the host you defined above
>
> define service{
>                  use                                        generic-service
>                  host_name                        serverdb
>                  service_description       W3SVC
>                  check_command
> check_nt!SERVICESTATE!-d SHOWALL -l W3SVC
>                  }
>
> define service{
>                  use                                        generic-service
>                  host_name                        SERVER_TS_B1
>                  service_description       W3SVC
>                  check_command
> check_nt!SERVICESTATE!-d SHOWALL -l W3SVC
>                  }
>
>
>
> # Create a service for monitoring the Explorer.exe process
> # Change the host_name to match the name of the host you defined above
>
> define service{
>                  use                                        generic-service
>                  host_name                        serverdb
>                  service_description       Explorer
>                  check_command
> check_nt!PROCSTATE!-d SHOWALL -l Explorer.exe
>                  }
>
>
> define service{
>                  use                                        generic-service
>                  host_name                        SERVER_TS_B1
>                  service_description       Explorer
>                  check_command
> check_nt!PROCSTATE!-d SHOWALL -l Explorer.exe
>                  }
>
>
>
> Desde já eu agradeço qualquer ajuda que vier.
>
> Marcos
>
>
>
> ------------------------------------------------------------------------------
> Benefiting from Server Virtualization: Beyond Initial Workload
> Consolidation -- Increasing the use of server virtualization is a top
> priority.Virtualization can reduce costs, simplify management, and improve
> application availability and disaster protection. Learn more about boosting
> the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev
> --
> [email protected] mailing list
> https://lists.sourceforge.net/lists/listinfo/nagios-users-br
> Wiki: http://nagios-br.sf.net/wiki

------------------------------------------------------------------------------
Benefiting from Server Virtualization: Beyond Initial Workload 
Consolidation -- Increasing the use of server virtualization is a top
priority.Virtualization can reduce costs, simplify management, and improve 
application availability and disaster protection. Learn more about boosting 
the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev
-- 
[email protected] mailing list
https://lists.sourceforge.net/lists/listinfo/nagios-users-br
Wiki: http://nagios-br.sf.net/wiki