Re: Erro no SNMP com CISCO

Oi.

> *Router que obtenho a Resposta pela metade*
> *[t@localhost ~]# /usr/local/nagios/libexec/check_snmp_cisco_ifstatus -C
> public -i Serial0 -H 162.18.2.254
> Interface Serial0 not found on device 162.18.2.254
> [t@localhost ~]#*
N=E3o achou a interface na database...
Faz "show ip int brief" no roteador... manda somente a linha com a
interface Serial0.

> *Router que nao obtenho resposta nenhuma
> *[t@localhost ~]# /usr/local/nagios/libexec/check_snmp_cisco_ifstatus -C
> public -i Serial0 -H 162.18.8.254
> Agent not responding, tried SNMP v1 and v2
> [t@localhost ~]#*
Faz "show run | include snmp" no roteador. Confere se a community
public est=E1 configurada.

> *Porem quando digito o comando, check_ifstatus nos routers 2.254 e 8.254
> obtenho essas informa=E7=F5es:*
>
> *[t@localhost ~]# /usr/local/nagios/libexec/check_ifstatus -C public -v 1=
 -H
> 162.18.8.254
> CRITICAL: No response from remote host '162.18.8.254' for
> 1.3.6.1.2.1.2.2.1.8 =A0with snmp version 1
T=E1 mortinho da silva...

> [t@localhost ~]# /usr/local/nagios/libexec/check_ifstatus -C public -H
> 162.18.2.254
> CRITICAL: host '162.18.2.254', interfaces up: 2, down: 26, dormant: 0,
> excluded: 0, unused: 0<BR>EtherNet Port on unit 1, port:11: down
> <BR>EtherNet Port on unit 1, port:21: down <BR>EtherNet Port on unit 1,
> port:7: down <BR>EtherNet Port on unit 1, port:26: down <BR>EtherNet Port=
 on
> unit 1, port:17: down <BR>EtherNet Port on unit 1, port:22: down
> <BR>EtherNet Port on unit 1, port:18: down <BR>EtherNet Port on unit 1,
> port:13: down <BR>EtherNet Port on unit 1, port:16: down <BR>EtherNet Port
> on unit 1, port:23: down <BR>EtherNet Port on unit 1, port:25: down
> <BR>EtherNet Port on unit 1, port:27: down <BR>EtherNet Port on unit 1,
> port:6: down <BR>EtherNet Port on unit 1, port:28: down <BR>EtherNet Port=
 on
> unit 1, port:3: down <BR>EtherNet Port on unit 1, port:9: down <BR>EtherN=
et
> Port on unit 1, port:12: down <BR>EtherNet Port on unit 1, port:20: down
> <BR>EtherNet Port on unit 1, port:14: down <BR>EtherNet Port on unit 1,
> port:15: down <BR>EtherNet Port on unit 1, port:8: down <BR>EtherNet Port=
 on
> unit 1, port:4: down <BR>EtherNet Port on unit 1, port:24: down <BR>Ether=
Net
> Port on unit 1, port:19: down <BR>EtherNet Port on unit 1, port:10: down
> <BR>EtherNet Port on unit 1, port:5: down <BR>
> =A0|up=3D2,down=3D26,dormant=3D0,excluded=3D0,unused=3D0*
Tenta /usr/local/nagios/libexec/check_ifstatus -C public -i Serial0 -H
162.18.2.254

> Onde est=E3o sendo os meus erros?
> Sei que no caso que obtenho os dados pela metade =E9 devido a porta errad=
a,
> por=E9m j=E1 tentei as interfaces Serial0 ate 4, Atm0 ate 4, FastEthernet=
0 ate 4
> e PPP0 ate 4 e em todas obtive a mesma resposta, nao existe... quais
> intefaces faltam?
As interfaces Cisco variam de modelo para modelo, se o seu modelo for
modular ele vai ter um nome de interface diferente de um modelo
n=E3o-modular, por exemplo.

> Qual =E9 a melhor maneira de obter os dados iguais ao do plugin que eu go=
stei?
Eu acho q vc vai ter que customizar o plugin por modelo de
equipamento. No resto, depende do administrador dos equipamentos.

sd,
Edgar

---------------------------------------------------------------------------=
---
BlackBerry&reg; DevCon Americas, Oct. 18-20, San Francisco, CA
The must-attend event for mobile developers. Connect with experts. =

Get tools for creating Super Apps. See the latest technologies.
Sessions, hands-on labs, demos & much more. Register early & save!
http://p.sf.net/sfu/rim-blackberry-1
-- =

[email protected] mailing list
https://lists.sourceforge.net/lists/listinfo/nagios-users-br
Wiki: http://nagios-br.sf.net/wiki