Re: NET-SNMP version: 5.7.3 and IPv6

Anders Wallin <[email protected]>
Newsgroups gmane.network.net-snmp.devel
Message-ID <CAF2baFeMQgMBvey7FewQJ3iiuceuMCuXiCCbsLY+1zXWEu6wvA@mail.gmail.com>
Hi Simon,

Read
https://serverfault.com/questions/242013/difference-between-link-local-and-global-link-addresses-in-isatap/242014

Regards
Anders

Den ons 24 jan. 2018 02:13Simon Chamlian <[email protected]> skrev:

> Since there is no reply, let me ask a different question:
>
> Was anyone able to use IPv6 with SNMPv2?
>
> IPv4
>      # snmpget -v 2c -c public 172.27.42.199 MPBC-1RU-MIB::mpbc1RUNEID.0
>      MPBC-1RU-MIB::mpbc1RUNEID.0 = STRING: "VERSA_199"
>
> works fine
>
>
> IPv6
>
> # snmpget -v 2c -c public [fe80::6eff:beff:fe02:d0%eth0]
> MPBC-1RU-MIB::mpbc1RUNEID.0
> Timeout: No Response from [fe80::6eff:beff:fe02:d0%eth0].
>
> or without the '%eth0'
>
> # snmpget -v 2c -c public [fe80::6eff:beff:fe02:d0]
> MPBC-1RU-MIB::mpbc1RUNEID.0
> Timeout: No Response from [fe80::6eff:beff:fe02:d0].
>
>
> does NOT work.
>
> Thanks,
> S.
>
>
>
> On Wed, Jan 17, 2018 at 10:58 AM, Simon Chamlian <[email protected]>
> wrote:
>
>> I got the Ipv6 working finally with SNMP v3. I had to add:
>>     agentaddress udp:161
>>     agentaddress udp6:161
>>
>> in snmpd.conf.
>>
>>
>> Now the problem is SNMPv2 that does not work with IPv6.
>>
>> I added:
>>      rocommunity6 public
>>      rwcommunity6 private
>>
>> but these tokens are not recognized:
>>     ./snmpd.conf: line 12: Warning: Unknown token: rocommunity6.
>>     ./snmpd.conf: line 13: Warning: Unknown token: rwcommunity6.
>>
>> Any hint will be much appreciated.
>>
>> Simon
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> On Tue, Jan 16, 2018 at 4:54 PM, Bill Fenner <[email protected]> wrote:
>>
>>> Simon,
>>>
>>> Can you try with global addresses? I wouldn't be horribly surprised if
>>> scope zones were not supported properly.  (Global v6 addresses have worked
>>> for me in net-snmp for years.)
>>>
>>>   Bill
>>>
>>>
>>> On Mon, Jan 15, 2018 at 2:37 PM, Simon Chamlian <[email protected]>
>>> wrote:
>>>
>>>> Hi,
>>>>
>>>> Just recompiled the agent by enabling IPv6 (  --enable-ipv6).
>>>>
>>>> The agent is working fine but don't seem to be able to use IPv6.
>>>>
>>>> Example:
>>>>
>>>> # snmpget -v 3 -u Admin -a MD5 -A Admin-00 -l authNoPriv 172.27.42.199
>>>> MPBC-1RU-MIB::mpbc1RUNEID.0 -Oqv
>>>> "TestNew"
>>>>
>>>> works fine.
>>>>
>>>>
>>>> In Ipv6:
>>>>
>>>> # snmpget -v 3 -u Admin -a MD5 -A Admin-00 -l authNoPriv
>>>> udp6:'[fe80::6eff:beff:fe02:d0%eth0]':161 MPBC-1RU-MIB::mpbc1RUNEID.0 -Oqv
>>>> snmpget: Timeout
>>>>
>>>> I also tried without the port
>>>> # snmpget -v 3 -u Admin -a MD5 -A Admin-00 -l authNoPriv
>>>> udp6:'[fe80::6eff:beff:fe02:d0%eth0]' MPBC-1RU-MIB::mpbc1RUNEID.0 -Oqv
>>>> snmpget: Timeout
>>>>
>>>>
>>>> Gives me timeout. What am I doing wrong? Do I need any special
>>>> instructions in snmpd.conf file?
>>>>
>>>> Note that when I launch the agent, I get the following error message in
>>>> the log:
>>>> Error opening specified endpoint ""
>>>> Server Exiting with code 1
>>>>
>>>> But the agent works fine with IPv4.
>>>>
>>>> Thanks,
>>>> S
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------------------------
>>>> Check out the vibrant tech community on one of the world's most
>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>> _______________________________________________
>>>> Net-snmp-coders mailing list
>>>> [email protected]
>>>> https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
>>>>
>>>>
>>>
>>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Net-snmp-coders mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
>

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot

_______________________________________________
Net-snmp-coders mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.