Re: Trying to run tutorial example

Ran Shalit <[email protected]>
Newsgroups gmane.network.net-snmp.devel
Message-ID <CAJ2oMhJ74ra4O3UCBK9iq781KOUL7vEiWBZm+F6XhpxL1aY1Qw@mail.gmail.com>
Thank you!

I have managed to make it working.
The tutorial in
http://net-snmp.sourceforge.net/wiki/index.php/TUT:Writing_a_Subagent
helped me a lot,
Yet, the following 2 things helped me make it working:
1. upgrade from 5.6.2 to 5.7.3
2. add agentx in configure
  --with-mib-modules="agentx"
3. add debug capability on running snmpd:
   snmpd -f -Lo: -Dagentx

I would add step2 in that tutorial.... It really took time to find the issues.

Thanks,
ranran


On Mon, Apr 23, 2018 at 1:23 PM, Anders Wallin <[email protected]> wrote:
> Hi,
>
> the tarball includes a makefile and testscripts that works for 5.7.3 and
> 5.8-pre
> Just run;
> make
> make test1
> make test2
>
> No documentation included, but the script and Makefile should be possible to
> read and understand
>
> Regards
> Anders
>
> mån 23 apr. 2018 kl 07:51 skrev Ran Shalit <[email protected]>:
>>
>> Hello,
>>
>> I am trying to run the tutorial for running agentX with MIB as described
>> here:
>>
>> http://net-snmp.sourceforge.net/wiki/index.php/TUT:Writing_a_Subagent
>>
>>
>> Yet, I keep getting "No Such Object available on this agent at this
>> OID".......
>>
>>
>> 1. starting snmpd with:
>>     snmpd -Lo
>>
>> 2. starting example:
>>
>> root@dm814x-evm:~# ./example-demon &
>> root@dm814x-evm:~# example-demon is up and running.
>>
>> 3. trying smpget fails:
>>
>> root@dm814x-evm:~# snmpget -m
>> /usr/share/snmp/mibs/NET-SNMP-TUTORIAL-MIB.txt -v
>> 2c 127.0.0.1 -c public NET-SNMP-TUTORIAL-MIB::nstAgentSubagentObject.0
>> NET-SNMP-TUTORIAL-MIB::nstAgentSubagentObject.0 = No Such Object
>> available on this agent at this OID
>> root@dm814x-evm:~#
>>
>>
>>
>> This is my snmpd.conf:
>> ===================
>> root@dm814x-evm:~# cat /home/root/.snmp/snmpd.conf
>> #s will make snmpd listen on all interfaces
>> agentAddress  udp:161
>>
>> # open to all network (not secured)
>>
>> master  agentx
>>
>> rocommunity public
>> rwcommunity private
>>
>> com2sec readonly  default         public
>> com2sec readwrite default         private
>>
>>
>> mibdirs /usr/share/snmp/mibs/
>> mibs +NET-SNMP-EXAMPLES-MIB
>> mibs +UCD-DEMO-MIB
>> mibs +ETHTOOL-MIB
>> mibs +NET-SNMP-TUTORIAL-MIB
>>
>> ============================
>>
>> I also tried to add debug arguments for snmpd, but I don't see any log
>> after starting it except the following:
>> root@dm814x-evm:~# snmpd -f -Lo: -Dagentx
>> registered debug token agentx, 1
>> agentx_register_app_config_handler: registering .conf token for
>> "agentxsocket"
>> agentx_register_app_config_handler: registering .conf token for
>> "agentxperms"
>> agentx_register_app_config_handler: registering .conf token for
>> "agentxRetries"
>> agentx_register_app_config_handler: registering .conf token for
>> "agentxTimeout"
>> Turning on AgentX master support.
>> /home/root/.snmp/snmpd.conf: line 15: Warning: Unknown token: mibdirs.
>> /home/root/.snmp/snmpd.conf: line 16: Warning: Unknown token: mibs.
>> /home/root/.snmp/snmpd.conf: line 17: Warning: Unknown token: mibs.
>> /home/root/.snmp/snmpd.conf: line 18: Warning: Unknown token: mibs.
>> /home/root/.snmp/snmpd.conf: line 19: Warning: Unknown token: mibs.
>> agentx/master: initializing...
>> agentx/master: initializing...   DONE
>> NET-SNMP version 5.6.2
>>
>>
>>
>> Why there are no further logs in snmpd window after running exampe-demon ?
>> Can someone please advise ?
>> Is there some issue of permissions ?
>>
>> Thank you,
>> ranran
>>
>>
>> ------------------------------------------------------------------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Net-snmp-coders mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/net-snmp-coders

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Net-snmp-coders mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.