Re: Junk in snmpwalk output
Gisle Vanem via Net-snmp-coders <[email protected]>
| Newsgroups | gmane.network.net-snmp.devel |
|---|---|
| Message-ID | <[email protected]> |
Niels Baggesen wrote: >> With this command: >> snmpwalk.exe -M mibs -m ALL -v1 -c public 10.0.0.21 >> >> I've getting lines with junk in the output: >> IPV6-MIB::ipv6NetToMediaValid.1.'................'.12 = INTEGER: true(1) > > It is trying to show an OCTET STRING as a string, which in most cases is useful but fails miserably for IPv6 addresses > which in the IPV6-MIB does not have a DISPLAY-HINT. > > Try doing snmpwalk with the -Ob option, then you will see something like this: > > ipv6NetToMediaValid.1.16.255.2.0.0.0.0.0.0.0.0.0.0.0.0.0.12 = INTEGER: true(1) > > You should see similar data from IP-MIB in a more readable form. Perfect! But I have no idea what a "DISPLAY-HINT" should do. With: snmpwalk.exe -M mibs -m ALL -v1 -c public 10.0.0.21 IPV6-MIB::ipv6NetToMediaValid I get no more junk: IPV6-MIB::ipv6NetToMediaValid.1.16.255.2.0.0.0.0.0.0.0.0.0.0.0.0.0.12 = INTEGER: true(1) IPV6-MIB::ipv6NetToMediaValid.1.16.255.2.0.0.0.0.0.0.0.0.0.0.0.0.0.22 = INTEGER: true(1) IPV6-MIB::ipv6NetToMediaValid.1.16.255.2.0.0.0.0.0.0.0.0.0.0.0.1.0.2 = INTEGER: true(1) IPV6-MIB::ipv6NetToMediaValid.5.16.32.2.109.189.32.120.0.1.93.187.117.76.81.91.63.96 = INTEGER: true(1) ... BTW Bart, I use the latest from SF's git. -- --gv _______________________________________________ Net-snmp-coders mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/net-snmp-coders