Re: snmptrapd

jayshankar nair <[email protected]>
Newsgroups gmane.network.net-snmp.devel
Message-ID <CACdxR1RV9GbepgVd3zKXuLAHSo8KvkEZ2KU8=h2-s9SKBFRDGw@mail.gmail.com>
Hi Anders,

I have attached the snmptrap log. Only error appearing in this log
couldn't connect to /var/agentx/master. Still snmptrapd is unable to
receive v2 traps from remote windows machine.

Thanks,
Jayshankar


On Wed, Feb 13, 2019 at 6:34 PM Anders Wallin <[email protected]> wrote:

> Start snmptrapd with debug traces. e.g. "-DALL -d -Lf /tmp/snmptrapd.log"
>
> Regards
> Anders Wallin
>
>
> On Wed, Feb 13, 2019 at 1:50 PM jayshankar nair <[email protected]>
> wrote:
>
>> Hi,
>>
>> I am running snmptrapd on linux machine. I am sending trap from the same
>> machine. I am able to receive trap on snmptrapd log and tcpdump logs.
>> My snmptrapd conf file is as below.
>>
>> authCommunity log,execute,net public
>> createUser -e 0x8000000001020304 traptest SHA mypassword DES mypassword
>> authuser log,execute,net traptest
>> createUser -e 0x8000000001020304 myuser MD5 mypassword
>> authuser log,execute,net myuser.
>>
>> In second scenario i am sending the trap(v2 and v3) from solaris and
>> windows machine. I am able to receive traps on tcpdump. But snmptrapd is
>> unable to receive traps.
>>
>> Thanks,
>> Jayshankar
>> _______________________________________________
>> Net-snmp-coders mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
>>
>

_______________________________________________
Net-snmp-coders mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
snmptrapd.log (application/octet-stream, 329.6 KB) - not displayed
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.