Re: support for SHA2 in net-snmp-5.9

It is resolved by adding ''--with-openssl' .


---------------------------------------------------------
            Net-SNMP configuration summary:
---------------------------------------------------------

  SNMP Versions Supported:    1 2c 3
  Building for:               linux
  Net-SNMP Version:           5.9
  Network transport support:  Callback Unix Alias TCP UDP TCPIPv6 UDPIPv6
IPv4Base SocketBase TCPBase UDPIPv4Base UDPBase IPBase IPv6Base
  SNMPv3 Security Modules:     usm
  Agent MIB code:            default_modules mibII snmpv3mibs =>
 snmpv3mibs mibII ucd_snmp notification notification-log-mib target
agent_mibs agentx disman/event disman/schedule utilities host
mibII/system_mib mibII/sysORTable mibII/snmp_mib mibII/vacm_vars
mibII/setSerialNo mibII/at mibII/ifTable mibII/ip mibII/tcp mibII/udp
mibII/ipv6 mibII/icmp if-mib ip-mib ip-forward-mib tcp-mib udp-mib
snmpv3/snmpEngine snmpv3/snmpMPDStats snmpv3/usmStats snmpv3/usmConf
snmpv3/usmUser
  MYSQL Trap Logging:         unavailable
  Embedded Perl support:      disabled
  SNMP Perl modules:          disabled
  SNMP Python modules:        disabled
  Crypto support from:        crypto
  Authentication support:     MD5 SHA1 SHA224 SHA256 SHA384 SHA512
  Encryption support:         DES AES AES128 AES192 AES192C AES256 AES256C
  Local DNSSEC validation:    disabled

---------------------------------------------------------

On Wed, Mar 10, 2021 at 9:28 PM Pushpa Thimmaiah <[email protected]>
wrote:

> Hi All,
>
> It is resolved by adding ''--without-openssl' .
>
>
> ---------------------------------------------------------
>             Net-SNMP configuration summary:
> ---------------------------------------------------------
>
>   SNMP Versions Supported:    1 2c 3
>   Building for:               linux
>   Net-SNMP Version:           5.9
>   Network transport support:  Callback Unix Alias TCP UDP TCPIPv6 UDPIPv6
> IPv4Base SocketBase TCPBase UDPIPv4Base UDPBase IPBase IPv6Base
>   SNMPv3 Security Modules:     usm
>   Agent MIB code:            default_modules mibII snmpv3mibs =>
>  snmpv3mibs mibII ucd_snmp notification notification-log-mib target
> agent_mibs agentx disman/event disman/schedule utilities host
> mibII/system_mib mibII/sysORTable mibII/snmp_mib mibII/vacm_vars
> mibII/setSerialNo mibII/at mibII/ifTable mibII/ip mibII/tcp mibII/udp
> mibII/ipv6 mibII/icmp if-mib ip-mib ip-forward-mib tcp-mib udp-mib
> snmpv3/snmpEngine snmpv3/snmpMPDStats snmpv3/usmStats snmpv3/usmConf
> snmpv3/usmUser
>   MYSQL Trap Logging:         unavailable
>   Embedded Perl support:      disabled
>   SNMP Perl modules:          disabled
>   SNMP Python modules:        disabled
>   Crypto support from:        crypto
>   Authentication support:     MD5 SHA1 SHA224 SHA256 SHA384 SHA512
>   Encryption support:         DES AES AES128 AES192 AES192C AES256 AES256C
>   Local DNSSEC validation:    disabled
>
> ---------------------------------------------------------
>
> On Wed, Mar 10, 2021 at 4:30 PM Pushpa Thimmaiah <
> [email protected]> wrote:
>
>> Hi All,
>>
>> I tried configure net-snmp-5.9  to enable  AES192, SHA2  for my work.   I
>> have used option '--enable-blumenthal-aes'  while configure , however
>> config log shows no details of sha2. Am I missing any config option here?
>>
>> ./configure '--prefix=/home//software/snmp8/snmpprefix'
>> '--with-default-snmp-version=3' '[email protected]'
>> '--with-sys-location=blocka' '--with-logfile=/home/software/snmp8/snmplog'
>> '--with-persistent-directory=/home/software/snmp8/snmper'
>> '--without-perl-modules' '--without-python-modules'
>> '--disable-embedded-perl' '--disable-shared' '--enable-static'
>> '--with-security-modules=usm' '--enable-ipv6' '--with-pic' '--with-cc=gcc'
>> 'CC=gcc' 'CFLAGS=-m64' '--with-mib-modules=mibII,snmpv3mibs'*
>> '--enable-blumenthal-aes'*
>>
>> ==================================================================
>> ---------------------------------------------------------
>>             Net-SNMP configuration summary:
>> ---------------------------------------------------------
>>
>>   SNMP Versions Supported:    1 2c 3
>>   Building for:               linux
>>   Net-SNMP Version:           5.9
>>   Network transport support:  Callback Unix Alias TCP UDP TCPIPv6 UDPIPv6
>> IPv4Base SocketBase TCPBase UDPIPv4Base UDPBase IPBase IPv6Base
>>   SNMPv3 Security Modules:     usm
>>   Agent MIB code:            default_modules mibII snmpv3mibs =>
>>  snmpv3mibs mibII ucd_snmp notification notification-log-mib target
>> agent_mibs agentx disman/event disman/schedule utilities host
>> mibII/system_mib mibII/sysORTable mibII/snmp_mib mibII/vacm_vars
>> mibII/setSerialNo mibII/at mibII/ifTable mibII/ip mibII/tcp mibII/udp
>> mibII/ipv6 mibII/icmp if-mib ip-mib ip-forward-mib tcp-mib udp-mib
>> snmpv3/snmpEngine snmpv3/snmpMPDStats snmpv3/usmStats snmpv3/usmConf
>> snmpv3/usmUser
>>   MYSQL Trap Logging:         unavailable
>>   Embedded Perl support:      disabled
>>   SNMP Perl modules:          disabled
>>   SNMP Python modules:        disabled
>>   Crypto support from:        internal
>>   *Authentication support:     MD5 SHA1*
>>   Encryption support:         DES AES AES128
>>   Local DNSSEC validation:    disabled
>>
>> ====================================================
>>
>

_______________________________________________
Net-snmp-coders mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders