not getting all the data I expected

I used yum to install net-snmp on my new x86_64 system
(this is what's installed:
net-snmp.x86_64                          5.2.1.2-FC3.1 
net-snmp-devel.x86_64                    5.2.1.2-FC3.1 
net-snmp-libs.x86_64                     5.2.1.2-FC3.1 
net-snmp-libs.i386                       5.2.1.2-FC3.1 
net-snmp-perl.x86_64                     5.2.1.2-FC3.1 
net-snmp-utils.x86_64                    5.2.1.2-FC3.1  )

And I've configured it the same way I did my i386 system (this is what's 
installed:
net-snmp.i386                            5.2.1-10.FC3 
net-snmp-libs.i386                       5.2.1-10.FC3 
net-snmp-utils.i386                      5.2.1-10.FC3           )

And instead of getting all the info I got on my i386 system, including 
bits in/out, memory, cpu load data, etc.  I get just the most basic 
system mib:
SNMPv2-MIB::sysDescr.0 = STRING: Linux hedwig.blast.com 2.6.10-1.770_FC3 
#1 Thu Feb 24 18:09:38 EST 2005 x86_64
SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10
SNMPv2-MIB::sysUpTime.0 = Timeticks: (82101) 0:13:41.01
SNMPv2-MIB::sysContact.0 = STRING: Root <root@localhost> (configure 
/etc/snmp/snmp.local.conf)
SNMPv2-MIB::sysName.0 = STRING: hedwig.blast.com
SNMPv2-MIB::sysLocation.0 = STRING: Unknown (edit /etc/snmp/snmpd.conf)
SNMPv2-MIB::sysORLastChange.0 = Timeticks: (3) 0:00:00.03
SNMPv2-MIB::sysORID.1 = OID: IF-MIB::ifMIB
SNMPv2-MIB::sysORID.2 = OID: SNMPv2-MIB::snmpMIB
SNMPv2-MIB::sysORID.3 = OID: TCP-MIB::tcpMIB
SNMPv2-MIB::sysORID.4 = OID: IP-MIB::ip
SNMPv2-MIB::sysORID.5 = OID: UDP-MIB::udpMIB
SNMPv2-MIB::sysORID.6 = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup
SNMPv2-MIB::sysORID.7 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance
SNMPv2-MIB::sysORID.8 = OID: SNMP-MPD-MIB::snmpMPDCompliance
SNMPv2-MIB::sysORID.9 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance
SNMPv2-MIB::sysORDescr.1 = STRING: The MIB module to describe generic 
objects for network interface sub-layers
SNMPv2-MIB::sysORDescr.2 = STRING: The MIB module for SNMPv2 entities
SNMPv2-MIB::sysORDescr.3 = STRING: The MIB module for managing TCP 
implementations
SNMPv2-MIB::sysORDescr.4 = STRING: The MIB module for managing IP and 
ICMP implementations
SNMPv2-MIB::sysORDescr.5 = STRING: The MIB module for managing UDP 
implementations
SNMPv2-MIB::sysORDescr.6 = STRING: View-based Access Control Model for SNMP.
SNMPv2-MIB::sysORDescr.7 = STRING: The SNMP Management Architecture MIB.
SNMPv2-MIB::sysORDescr.8 = STRING: The MIB for Message Processing and 
Dispatching.
SNMPv2-MIB::sysORDescr.9 = STRING: The management information 
definitions for the SNMP User-based Security Model.
SNMPv2-MIB::sysORUpTime.1 = Timeticks: (2) 0:00:00.02
SNMPv2-MIB::sysORUpTime.2 = Timeticks: (2) 0:00:00.02
SNMPv2-MIB::sysORUpTime.3 = Timeticks: (2) 0:00:00.02
SNMPv2-MIB::sysORUpTime.4 = Timeticks: (2) 0:00:00.02
SNMPv2-MIB::sysORUpTime.5 = Timeticks: (2) 0:00:00.02
SNMPv2-MIB::sysORUpTime.6 = Timeticks: (2) 0:00:00.02
SNMPv2-MIB::sysORUpTime.7 = Timeticks: (3) 0:00:00.03
SNMPv2-MIB::sysORUpTime.8 = Timeticks: (3) 0:00:00.03
SNMPv2-MIB::sysORUpTime.9 = Timeticks: (3) 0:00:00.03
HOST-RESOURCES-MIB::hrSystemUptime.0 = Timeticks: (45227510) 5 days, 
5:37:55.10

What am I missing?  How do I get all the info I get by default on my 
other system?  (Both or fedora core 3)

Anne



-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users