problem on connecting to remote host in windows

Hi all,

i still cant get the
agent reply to snmpget, set, walk, getnext etc. queries to a remotehost
under windows.
i have the problem that my queries end with a timeout no response from
the remote host.
I've a machine with win 2003 server and another machine with win xp pro
connected through a network cable. both have the net-snmp kit
installed. i can ping the machines and the queries like snmpget are
working for each machine itself well.  but when i try to send a snmpget
query
through the network the timeout problem appears.
The snmpdtrap.log has following output:

2005-09-06 15:58:31 servermachine [UDP: [192.168.1.129]:1049]:
DISMAN-EVENT-MIB::sysUpTimeIns­­tance = Timeticks: (290748)
0:48:27.48
SNMPv2-MIB::snmpTrapOID.0 = OID:
SNMPv2-MIB::authenticationFail­­ure
SNMPv2-MIB::snmpTrapEnterprise­­.0 = OID:
NET-SNMP-MIB::netSnmpAgentOIDs­­.13

I have configured the snmpd.conf file for each machine with the basic
setup.
this is for example the one for the win 2003
server:

##############################­­­############################­#­#­###############

#
# snmpd.conf
#
#   - created by the snmpconf configuration
program
#
##############################­­­############################­#­#­###############

# SECTION: Access Control Setup
#
#   This section defines who is allowed to talk to your running
#   snmp agent.

# rwuser: a SNMPv3 read-write user
#   arguments:  user [noauth|auth|priv] [restriction_oid]

rwuser  admins priv
rwuser  admin auth

# rouser: a SNMPv3 read-only user
#   arguments:  user [noauth|auth|priv] [restriction_oid]

rouser  user noauth

# rocommunity: a SNMPv1/SNMPv2c read-only access community name
#   arguments:  community [default|hostname|network/bits­­­] [oid]

rocommunity  server_user 192.168.1.129

# rwcommunity: a SNMPv1/SNMPv2c read-write access community name
#   arguments:  community [default|hostname|network/bits­­­] [oid]

rwcommunity  servermachine
192.168.1.129

##############################­­­############################­#­#­###############

# SECTION: Monitor Various Aspects of the Running Host
#
#   The following check up on various aspects of a host.

# proc: Check for processes that should be running.
#     proc NAME [MAX=0] [MIN=0]
#
#     NAME:  the name of the process to check for.  It must match
#            exactly (ie, http will not find httpd processes).
#     MAX:   the maximum number allowed to be running.  Defaults to 0.
#     MIN:   the minimum number to be running.  Defaults to 0.
#
#   The results are reported in the prTable section of the UCD-SNMP-MIB

tree
#   Special Case:  When the min and max numbers are both 0, it assumes
#   you want a max of infinity and a min of 1.

proc  svchost.exe 8
1

##############################­­­############################­#­#­###############

# SECTION: System Information Setup
#
#   This section defines some of the information reported in
#   the "system" mib group in the mibII tree.

# syslocation: The [typically physical] location of the system.
#   Note that setting this value here means that when trying to
#   perform an snmp SET operation to the sysLocation.0 variable will
make
#   the agent return the "notWritable" error code.  IE, including
#   this token in the snmpd.conf file will disable write access to
#   the variable.
#   arguments:  location_string

syslocation  serverpc

# syscontact: The contact information for the administrator
#   Note that setting this value here means that when trying to
#   perform an snmp SET operation to the sysContact.0 variable will
make
#   the agent return the "notWritable" error code.  IE, including
#   this token in the snmpd.conf file will disable write access to
#   the variable.
#   arguments:  contact_string

syscontact  [email protected]

# sysservices: The proper value for the sysServices object.
#   arguments:  sysservices_number

sysservices
76

##############################­­­############################­#­#­###############

# SECTION: Trap Destinations
#
#   Here we define who the agent will send traps to.

# trapsink: A SNMPv1 trap receiver
#   arguments: host [community] [portnum]

trapsink  192.168.1.129 servermachine 162
trapsink  xppromachine servertrap 162

# trap2sink: A SNMPv2c trap receiver
#   arguments: host [community] [portnum]

trap2sink  192.168.1.129 servermachine 162
trap2sink  xppromachine servertrap 162

# informsink: A SNMPv2c inform (acknowledged trap) receiver
#   arguments: host [community] [portnum]

informsink  192.168.1.129 servermachine 162
informsink  xppromachine servertrap 162

# trapcommunity: Default trap sink community to use
#   arguments: community-string

trapcommunity  servermachinetrap
trapcommunity  xppromachinetrap

# authtrapenable: Should we send traps when authentication failures
occur
#   arguments: 1 | 2   (1 = yes, 2 = no)

authtrapenable  1
##############################­­#############################­#­#####

#end of snmpd.conf
##############################­­#############################­#­#####

my firewalls and the viruskits are down and the ports 161/162 wide
open.
Isn't there anyone who can give some hints?

with best regards 

-- 
Lust, ein paar Euro nebenbei zu verdienen? Ohne Kosten, ohne Risiko!
Satte Provisionen für GMX Partner: http://www.gmx.net/de/go/partner


-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users