problem to connect with remotehost on windows plz help!!!

Hi all, 

i still cant get the 
agent reply to snmpget, set, walk, getnext etc. queries to a remotehost 
under windows. 
i have the problem that my queries end with a timeout no response from 
the remote host. 
I've a machine with win 2003 server and another machine with win xp pro 
connected through a network cable. both have the net-snmp kit 
installed. i can ping the machines and the queries like snmpget are 
working for each machine itself well.  but when i try to send a snmpget 
query 
through the network the timeout problem appears. 
The snmpdtrap.log has following output: 


2005-09-06 15:58:31 servermachine [UDP: [192.168.1.129]:1049]: 
DISMAN-EVENT-MIB::sysUpTimeIns­­­tance = Timeticks: (290748) 
0:48:27.48 
SNMPv2-MIB::snmpTrapOID.0 = OID: 
SNMPv2-MIB::authenticationFail­­­ure 
SNMPv2-MIB::snmpTrapEnterprise­­­.0 = OID: 
NET-SNMP-MIB::netSnmpAgentOIDs­­­.13 


I have configured the snmpd.conf file for each machine with the basic 
setup. 
this is for example the one for the win 2003 server: 


##############################­­­­###########################­#­#­#­############### 


# 
# snmpd.conf 
# 
#   - created by the snmpconf configuration program 
# 
##############################­­­­###########################­#­#­#­############### 


# SECTION: Access Control Setup 
# 
#   This section defines who is allowed to talk to your running 
#   snmp agent. 


# rwuser: a SNMPv3 read-write user 
#   arguments:  user [noauth|auth|priv] [restriction_oid] 


rwuser  admins priv 
rwuser  admin auth 


# rouser: a SNMPv3 read-only user 
#   arguments:  user [noauth|auth|priv] [restriction_oid] 


rouser  user noauth 


# rocommunity: a SNMPv1/SNMPv2c read-only access community name 
#   arguments:  community [default|hostname|network/bits­­­­] [oid] 


rocommunity  server_user 192.168.1.129 


# rwcommunity: a SNMPv1/SNMPv2c read-write access community name 
#   arguments:  community [default|hostname|network/bits­­­­] [oid] 


rwcommunity  servermachine 192.168.1.129 


##############################­­­­###########################­#­#­#­############### 


# SECTION: Monitor Various Aspects of the Running Host 
# 
#   The following check up on various aspects of a host. 


# proc: Check for processes that should be running. 
#     proc NAME [MAX=0] [MIN=0] 
# 
#     NAME:  the name of the process to check for.  It must match 
#            exactly (ie, http will not find httpd processes). 
#     MAX:   the maximum number allowed to be running.  Defaults to 0. 
#     MIN:   the minimum number to be running.  Defaults to 0. 
# 
#   The results are reported in the prTable section of the UCD-SNMP-MIB 


tree 
#   Special Case:  When the min and max numbers are both 0, it assumes 
#   you want a max of infinity and a min of 1. 


proc  svchost.exe 8 1 


##############################­­­­###########################­#­#­#­############### 


# SECTION: System Information Setup 
# 
#   This section defines some of the information reported in 
#   the "system" mib group in the mibII tree. 


# syslocation: The [typically physical] location of the system. 
#   Note that setting this value here means that when trying to 
#   perform an snmp SET operation to the sysLocation.0 variable will 
make 
#   the agent return the "notWritable" error code.  IE, including 
#   this token in the snmpd.conf file will disable write access to 
#   the variable. 
#   arguments:  location_string 


syslocation  serverpc 


# syscontact: The contact information for the administrator 
#   Note that setting this value here means that when trying to 
#   perform an snmp SET operation to the sysContact.0 variable will 
make 
#   the agent return the "notWritable" error code.  IE, including 
#   this token in the snmpd.conf file will disable write access to 
#   the variable. 
#   arguments:  contact_string 


syscontact  [email protected] 


# sysservices: The proper value for the sysServices object. 
#   arguments:  sysservices_number 


sysservices 76 


##############################­­­­###########################­#­#­#­############### 


# SECTION: Trap Destinations 
# 
#   Here we define who the agent will send traps to. 


# trapsink: A SNMPv1 trap receiver 
#   arguments: host [community] [portnum] 


trapsink  192.168.1.129 servermachine 162 
trapsink  xppromachine servertrap 162 


# trap2sink: A SNMPv2c trap receiver 
#   arguments: host [community] [portnum] 


trap2sink  192.168.1.129 servermachine 162 
trap2sink  xppromachine servertrap 162 


# informsink: A SNMPv2c inform (acknowledged trap) receiver 
#   arguments: host [community] [portnum] 


informsink  192.168.1.129 servermachine 162 
informsink  xppromachine servertrap 162 


# trapcommunity: Default trap sink community to use 
#   arguments: community-string 


trapcommunity  servermachinetrap 
trapcommunity  xppromachinetrap 


# authtrapenable: Should we send traps when authentication failures 
occur 
#   arguments: 1 | 2   (1 = yes, 2 = no) 


authtrapenable  1 
##############################­­­############################­#­#­##### 


#end of snmpd.conf 
##############################­­­############################­#­#­##### 


my firewalls and the viruskits are down and the ports 161/162 wide 
open. 
Isn't there anyone who can give some hints? 


with best regards 




This message was sent using the free email service EMAILS.CC located at www.emails.cc. If you receive ANY abuse from this, please contact us.