RE: Help with exec and pass

On Mon, 2005-10-17 at 10:38 +0200, Santanu Misra wrote: 
>  I am going to post the dummies how to on that. You
> are welcome to make your comments on that.

Oh, you foolish, foolish person!
You really shouldn't make suggestions like that :-)

>  Here is the draft.


> 1. It should always reply with 3(three) sets of DATA
> 	-> The OID
> 	-> The Type (String or integer)

A "pass" script can return more than just string or
(signed) integer values.  There are about eight or
nine recognised types.  You've missed the following:

	unsigned
	counter
	octet
	gauge
	objectid
	timetick
	ipaddress

It doesn't support 64-bit counters (unfortunately),
and you can probably safely ignore "opaque".  But
the type returned must match the MIB definition.



> 2. It should not print anything or debug message if there is
>  anything wrong it should just do an exit!!

That's true for  GET/GETNEXT requests.
It doesn't hold for processing SET requests.


> 3. The script should be able to answer to "-g" and "-n" option
>  only when that was passed otherwise do an exit.

Nope - it should also handle "-s", for SET requests.
(I hope that you *have* read the man page!?)


> 4. When it is "-g" it should print the value for the OID it was asked.
> Example:
> 
> # /usr/bin/lmstat.pl -g .1.3.6.1.4.1.9999.1.0.0
> .1.3.6.1.4.1.9999.1.0.0
> string
> QAC_runtime


> 5. When it is "-n" it should print the value for the next OID,
> # /usr/bin/lmstat.pl -n .1.3.6.1.4.1.9999.1.0.0
> .1.3.6.1.4.1.9999.1.0.1

You'd probably be better off illustrating this with the
next scalar-style OID - .1.3.6.1.4.1.9999.1.1.0

It's unlikely that both .1.3.6.1.4.1.9999.1.0.0 and
.1.3.6.1.4.1.9999.1.0.1 would be valid in any sensible MIB.
(In fact, ending with two 0's is unusual, and you'd do
better using ...1.1.0 and ...1.2.0 instead)

> integer
> 0

Note that with "-n", the requested OID need not actually be valid
for a "-g" request.  The following invocations:

	/usr/bin/lmstat.pl -n .1.3.6.1.4.1.9999.1.0.0
	/usr/bin/lmstat.pl -n .1.3.6.1.4.1.9999.1.0.0.0.0.0.0.0.0
	/usr/bin/lmstat.pl -n .1.3.6.1.4.1.9999.1.0.99
	/usr/bin/lmstat.pl -n .1.3.6.1.4.1.9999.1.1

should *all* return the same results (for .1.3.6.1.4.1.9999.1.1.0)



> 6. When the last OID is reached it should exit.

Or anything following.


Dave


-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users