Frustration with Disk Monitoring

Hello all,
 I've been messing around with the RHEL 4 installation of Net-SNMP and
after reading the docs ( man snmpd.conf ) I've tried to monitor the
disks on my system.  Its been failing miserably with "token" errors.  I
guessed that I need to compile my own version of net-snmp so I did and
did so with these options.

./configure --with-perl-modules --with-mib-modules="disman/event-mib"

I was hoping that by using this it would work but now I'm getting
slightly different errors.  Seems like progress though.

Dec 15 14:45:20 w72l-tux kernel: audit(1134675920.917:0): avc:  denied
{ getattr } for  pid=9101 exe=/usr/sbin/snmpd path=/home dev=hda4 ino=2
scontext=root:system_r:snmpd_t tcontext=system_u:object_r:home_root_t
tclass=dir

I really have no idea what it is complaining about.  Can anybody tell me
? Here is my snmpd.conf


########################################################################
###
#
# snmpd.conf
#
#   - created by the snmpconf configuration program
#
########################################################################
###
# SECTION: Trap Destinations
#
#   Here we define who the agent will send traps to.

# trap2sink: A SNMPv2c trap receiver
#   arguments: host [community] [portnum]

trap2sink  netcool
trap2sink  209.243.240.105

# informsink: A SNMPv2c inform (acknowledged trap) receiver
#   arguments: host [community] [portnum]

informsink  209.243.240.105

# trapcommunity: Default trap sink community to use
#   arguments: community-string

trapcommunity  SPG-UnxVisi0n
trapcommunity  public

# authtrapenable: Should we send traps when authentication failures
occur
#   arguments: 1 | 2   (1 = yes, 2 = no)

authtrapenable  1



########################################################################
###
# SECTION: System Information Setup
#
#   This section defines some of the information reported in
#   the "system" mib group in the mibII tree.

# syslocation: The [typically physical] location of the system.
#   Note that setting this value here means that when trying to
#   perform an snmp SET operation to the sysLocation.0 variable will
make
#   the agent return the "notWritable" error code.  IE, including
#   this token in the snmpd.conf file will disable write access to
#   the variable.
#   arguments:  location_string

syslocation  "Siemens Power Generation"

# syscontact: The contact information for the administrator
#   Note that setting this value here means that when trying to
#   perform an snmp SET operation to the sysContact.0 variable will make
#   the agent return the "notWritable" error code.  IE, including
#   this token in the snmpd.conf file will disable write access to
#   the variable.
#   arguments:  contact_string

syscontact      "PG IT Root [email protected]"



########################################################################
###
# SECTION: Monitor Various Aspects of the Running Host
#
#   The following check up on various aspects of a host.

# disk: Check for disk space usage of a partition.
#   The agent can check the amount of available disk space, and make
#   sure it is above a set limit.
#
#    disk PATH [MIN=100000]
#
#    PATH:  mount path to the disk in question.
#    MIN:   Disks with space below this value will have the Mib's
errorFlag set.
#           Can be a raw byte value or a percentage followed by the %
#           symbol.  Default value = 100000.
#
#   The results are reported in the dskTable section of the UCD-SNMP-MIB
tree

disk  /home 90%

agentSecName internal
rouser internal

monitor   -o dskPath -o dskErrorMsg "dskTable" dskErrorFlag != 0
#monitor -u root -i -r 30 -o dskPath.1 -o dskErrorMsg.1 "home file
system" dskErrorFlag.1 !=0

# load: Check for unreasonable load average values.
#   Watch the load average levels on the machine.
#
#    load [1MAX=12.0] [5MAX=12.0] [15MAX=12.0]
#
#    1MAX:   If the 1 minute load average is above this limit at query
#            time, the errorFlag will be set.
#    5MAX:   Similar, but for 5 min average.
#    15MAX:  Similar, but for 15 min average.
#
#   The results are reported in the laTable section of the UCD-SNMP-MIB
tree

# load  5.5 5.5 5.5



########################################################################
###
# SECTION: Access Control Setup
#
#   This section defines who is allowed to talk to your running
#   snmp agent.

# rocommunity: a SNMPv1/SNMPv2c read-only access community name
#   arguments:  community [default|hostname|network/bits] [oid]

rocommunity xxxx localhost
rocommunity xxxx pg-mon-01
rocommunity xxxx pg-mon-02
rocommunity xxxx pg-mon-03
rocommunity xxxx pg-mon-04
rocommunity xxxx pg-mon-05
rocommunity xxxx pg-mon-06
rocommunity xxxx pg-mon-07
rocommunity xxxx pg-mon-08
rocommunity xxxx pg-mon-09
rocommunity xxxx pg-mon-10
rocommunity xxxx netcool
rocommunity xxxx nnm
rocommunity xxxx ehealth

Jack