net-snmp v5.3.0.1 & RFC1213-MIB question

 Hello,
        
        I installed net-snmp v5.3.0.1 on my virtual machine with CentOS as OS.
    I run snmpd service which runs net-snmp v5.3.0.1. No problem. After  that I run IReasonning Mib Browser, and executed a Walk command on  RFC1213-MIB.
        I got the following output:
        
        sysDescr.0    Linux localhost.localdomain 2.4.21-37.EL #1 Wed Sep 28 14:14:23 EDT 2005 i686
        sysObjectID.0    .1.3.6.1.4.1.8072.3.2.10
        sysUpTime.0    160053
        sysContact.0    Root <root@localhost> (configure /etc/snmp/snmp.local.conf)
        sysName.0    localhost.localdomain
        sysLocation.0    Unknown (edit /etc/snmp/snmpd.conf)
        .1.3.6.1.2.1.1.8.0    1
        .1.3.6.1.2.1.1.9.1.2.1    .1.3.6.1.6.3.1
        .1.3.6.1.2.1.1.9.1.2.2    .1.3.6.1.2.1.49
            .1.3.6.1.2.1.1.9.1.2.3    .1.3.6.1.2.1.4
          .1.3.6.1.2.1.1.9.1.2.4    .1.3.6.1.2.1.50
        .1.3.6.1.2.1.1.9.1.2.5    .1.3.6.1.6.3.16.2.2.1
        .1.3.6.1.2.1.1.9.1.2.6    .1.3.6.1.6.3.10.3.1.1
        .1.3.6.1.2.1.1.9.1.2.7    .1.3.6.1.6.3.11.3.1.1
        .1.3.6.1.2.1.1.9.1.2.8    .1.3.6.1.6.3.15.2.1.1
        .1.3.6.1.2.1.1.9.1.3.1    The MIB module for SNMPv2 entities
        .1.3.6.1.2.1.1.9.1.3.2    The MIB module for managing TCP implementations
        .1.3.6.1.2.1.1.9.1.3.3    The MIB module for managing IP and ICMP implementations
        .1.3.6.1.2.1.1.9.1.3.4    The MIB module for managing UDP implementations
        .1.3.6.1.2.1.1.9.1.3.5    View-based Access Control Model for SNMP.
        .1.3.6.1.2.1.1.9.1.3.6    The SNMP Management Architecture MIB.
            .1.3.6.1.2.1.1.9.1.3.7    The MIB for Message Processing and Dispatching.
          .1.3.6.1.2.1.1.9.1.3.8    The management information definitions for the SNMP User-based Security Model.
        .1.3.6.1.2.1.1.9.1.4.1    1
        .1.3.6.1.2.1.1.9.1.4.2    1
        .1.3.6.1.2.1.1.9.1.4.3    1
        .1.3.6.1.2.1.1.9.1.4.4    1
        .1.3.6.1.2.1.1.9.1.4.5    1
        .1.3.6.1.2.1.1.9.1.4.6    1
        .1.3.6.1.2.1.1.9.1.4.7    1
        .1.3.6.1.2.1.1.9.1.4.8    1
        .1.3.6.1.2.1.25.1.1.0    1027303
        
        My question is: why it doesn't show all RFC1213-MIB objects (interfaces, ip objects, and so on)?
        
    By the way, when I run IReasonning Mib Browser, and executed a Walk  command on the same MIB on my PC with XP as OS, I got much more data.
  
        I would greatly appreciate your help.
        
        Stan 
  

		
---------------------------------
Yahoo! Photos
 Ring in the New Year with Photo Calendars. Add photos, events, holidays, whatever.