mib2c not working !!! Help ! (net-snmp-5.2.1.2)

Please HELP !
 
I still can't make mib2c work, it's something with the "DynaLoader.pm".
 
1) when I run mib2c I get the usual "ERROR: You don't have the SNMP perl
module installed ", but it IS installed !!!
 
2) I added a perl print line to see why it fails:
----------------------
if (!$havesnmp) {
 
    print "Failed to load, because : $@";
----------------------

 
and I get the same error that the 'make test' gave me:
-----------------------------------
Failed to load, because : 
Can't load
'/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi/auto/SNMP/SNMP.s
o' for module SNMP:
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi/auto/SNMP/SNMP.so
: 
************************************************************************
**************
undefined symbol: usmAESPrivProtocol at
/usr/lib/perl5/5.8.5/i386-linux-thread-multi/DynaLoader.pm line 230.
************************************************************************
**************
--------------------------
 
 
 
 
 

  _____  

From: [email protected]
[mailto:[email protected]] On Behalf Of Makavy,
Erez (Erez)
Sent: Monday, February 13, 2006 9:38 PM
To: [email protected]
Cc: jdx
Subject: RE: Installation problem, mib2c not working (net-snmp-5.2.1.2)


More info about my problem:
----------------------------------------
1) I'm using RedHat Linux 2.6.9
 
2) My configure was run as follows:
./configure --with-libwrap                                   \
            --with-perl-modules                               \
            --with-mib-modules="agentx"                        \
            --prefix="/usr/local/net-snmp-5.2.1.2"              \
            --program-suffix="_5.2.1.2"                          \
            --with-persistent-directory="/var/net-snmp-5.2.1.2"   \
            --with-sys-location="def-location"                     \
            --with-sys-contact="no-contact"                         \
            --with-default-snmp-version="1"                          \
            --with-logfile="/var/log/snmpd-5.2.1.2.log"
 
3) 'Make install' when well without errors.
4) mib2c didn't work, shown the "ERROR: You don't have the SNMP perl
module installed"
5) I also tried to manually installed the perl modules:
        - cd perl
        - perl Makefile.PL
        - make
 
        - make test FAILS with this error:
---------------------------------------------------------
# Running under perl version 5.008005 for linux
# Current time local: Mon Feb 13 21:32:16 2006
# Current time GMT:   Mon Feb 13 19:32:16 2006
# Using Test.pm version 1.25
Can't load '../blib/arch/auto/SNMP/SNMP.so' for module SNMP:
../blib/arch/auto/SNMP/SNMP.so: undefined symbol: usmAESPrivProtocol at
/usr/lib/perl5/5.8.5/i386-linux-thread-multi/DynaLoader.pm line 230.
 at ../blib/lib/NetSNMP/OID.pm line 19
Compilation failed in require at ../blib/lib/NetSNMP/OID.pm line 19.
BEGIN failed--compilation aborted at ../blib/lib/NetSNMP/OID.pm line 19.
Compilation failed in require at test.pl line 10.
BEGIN failed--compilation aborted at test.pl line 10.
make[1]: *** [test_dynamic] Error 255
make[1]: Leaving directory `/root/Net-SNMP/net-snmp-5.2.1.2/perl/OID'
make: *** [test] Error 2
-----------------------------------------------------------

 
 
Questions:
---------------
1) Could it be that it doesn't work becuase I changed the prefix (
--prefix="/usr/local/net-snmp-5.2.1.2" )?
    I'll try and remove the --prefix directive.
 
2) Any other solutions? (I would like to install it to a different
prefix!)

Thank,
Erez.
 
    
    

 
 
 
 

  _____  

From: jdx [mailto:[email protected]] 
Sent: Monday, February 13, 2006 3:54 PM
To: Makavy, Erez (Erez); [email protected]
Subject: Re: Installation problem, mib2c not working (net-snmp-5.2.1.2)


Hi,
 
You have already got many messages, but I don't keep your configuration
in mind.
For mine (one Linux , other Win32) I had to install manually the
Net-SNMP.ppd (found in /usr/perl)
I found the information in some README...   so I just could advertize
you to
 
   RTFM  (Read The Fucky Manual)
 
Bye
 

	----- Original Message ----- 
	From: Makavy, Erez (Erez) <mailto:[email protected]>  
	To: [email protected] 
	Sent: Monday, February 13, 2006 1:19 PM
	Subject: Installation problem, mib2c not working
(net-snmp-5.2.1.2)

	After installing net-snmp-5.2.1.2 (configured with
--with-perl-modules),
	I get the usual error, when running mib2c:
	 
	
------------------------------------------------------------------------
------------------------------
	ERROR: You don't have the SNMP perl module installed.  Please
obtain
	this by getting the latest source release of the net-snmp
toolkit from
	http://www.net-snmp.org/download/ .  Once you download the
source and
	unpack it, the perl module is contained in the perl/SNMP
directory.
	See the README file there for instructions.
	
------------------------------------------------------------------------
------------------------------
	 
	It seems that the SNMP perl module was installed, but mib2c does
not find it.
	 
	1) How do I fix it?
	2) Is there a bug in the 'configure'?
	 
	Thanks,
	Erez.