net-snmp v5.3.0.1 filltering problem

Hi everybody,
      I would greatly appreciate if you could help me with the   following problem.
    1) net-snmp v5.3.0.1 and the RMON2 subagent   (auto-generated by mib2c   using mib2c.table_data.conf) are running on Linux. 
    2) in order to get alMatrixSDOctets objects from   alMatrixSDTable I use the following command:
    snmpgetnext -v 2c -c public localhost   1.3.6.1.2.1.16.17.1.1.3.1.0.3
    where the 0 represents a timestamp, and got the   following response:
    SNMPv2-SMI::mib-2.16.17.1.1.3.1.1766.3.4.10.16.77.8.4.10.16.76.8.10 =   Gauge32: 1842, 
    where 1766 represents timestamp of the selected record   in the alMatrixSDTable  table.
    3) my goal is that this respond looks like   this
    SNMPv2-SMI::mib-2.16.17.1.1.3.1.0.3.4.10.16.77.8.4.10.16.76.8.10 = Gauge32:   1842, 
    Where 1766 is replaced by 0 that we have in the original   request.
    4) I checked the request->requestvb->name   in the 
    alMatrixSDTable_handler(netsnmp_mib_handler   *handler,
                             netsnmp_handler_registration *reginfo,
                             netsnmp_agent_request_info *reqinfo,
                             netsnmp_request_info *requests)
    and discovered that   request->requestvb->name is not equal to the original request oid; it has   a value that in the alMatrixSDTable.
    5) my questions are: 
    a) how could I get the original request oid   ?   
          b)does the time   filltering work in this case?
      Thanks a   lot,
      Stan
  
		
---------------------------------
Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less.