RE: Compilation Problem with 5.3.1

My Make is now failing at 

usr/bin/ld: cannot find -lelf 
collect2: ld returned 1 exit status 
make[1]: *** [snmpd] Error 1 
make[1]: Leaving directory `/home/amit/netsnmp/net-snmp-5.3.1/agent' 

Please install the following rpm package 
elfutils-devel-0.76-3.i386.rpm
 
Regards,
Sri.
 

************************************************************************
************************************************************************
************************************************************************
*****

This e-mail, and any attachments thereto, are intended only for use by
the addressee(s) named herein and may contain privileged and/or
confidential information. If you are not the intended recipient of this
e-mail, you are hereby notified that any dissemination, distribution or
copying of this e-mail, and any attachments thereto, is illegal and
strictly prohibited. If you have received this e-mail in error, please
immediately notify me by telephone and permanently delete the original
and any copy of any e-mail and any printout thereof.

 

________________________________

From: [email protected]
[mailto:[email protected]] On Behalf Of Amit
Gupta
Sent: Thursday, September 21, 2006 10:49 AM
To: [email protected]
Subject: Re: Compilation Problem with 5.3.1



Hi Thomas, 

Thanks for the response.  I could move forward but still not able 
to complete it, 

My Make is now failing at 

usr/bin/ld: cannot find -lelf 
collect2: ld returned 1 exit status 
make[1]: *** [snmpd] Error 1 
make[1]: Leaving directory `/home/amit/netsnmp/net-snmp-5.3.1/agent' 

I have checked the FAQ and created a soft link to the given library but
still it fails. 

Thomas, also can i compile the perl module without compiling the
complete package 
Below is perl -v output 

perl -v 

This is perl, v5.8.5 built for x86_64-linux-thread-multi 

Copyright 1987-2004, Larry Wall 

Perl may be copied only under the terms of either the Artistic License
or the 
GNU General Public License, which may be found in the Perl 5 source kit.


Complete documentation for Perl, including FAQ lists, should be found on

this system using `man perl' or `perldoc perl'.  If you have access to
the 
Internet, point your browser at http://www.perl.com/, the Perl Home
Page. 


and this is error on compiling perl module 

[root@ggns1proj01 perl]# make 
make[1]: Entering directory
`/home/amit/netsnmp/net-snmp-5.3.1/perl/default_store' 
gcc -c   -O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions
-fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386
-mtune=generic -fasynchronous-unwind 
-tables -Dlinux -I/usr/include/rpm -D_REENTRANT -D_GNU_SOURCE
-fno-strict-aliasing -pipe -Wdeclaration-after-statement
-I/usr/local/include -D_LARGEFILE_SOU 
RCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm
-I/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -I.
-I/usr/include/net-snmp -D_REENTRANT -D_GNU_SOURCE -D 
DEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -g
-pipe -m64   -DVERSION=\"5.0 
301\" -DXS_VERSION=\"5.0301\" -fPIC
"-I/usr/lib64/perl5/5.8.5/x86_64-linux-thread-multi/CORE"
default_store.c 
cc1: error: unrecognized command line option "-fstack-protector" 
cc1: error: invalid parameter `ssp-buffer-size' 
default_store.c:1: error: CPU you selected does not support x86-64
instruction set 
default_store.c:1: error: bad value (generic) for -mtune= switch 
make[1]: *** [default_store.o] Error 1 
make[1]: Leaving directory
`/home/amit/netsnmp/net-snmp-5.3.1/perl/default_store' 
make: *** [subdirs] Error 2 


Regards 
- Amit 



Thomas Anders <[email protected]> 
Sent by: [email protected] 

09/20/2006 02:31 PM 
Please respond to
[email protected]


To
Amit Gupta <[email protected]> 
cc
[email protected] 
Subject
Re: Compilation Problem with 5.3.1

	




Amit Gupta wrote:
> I ahave just downloaded the Netsnmp 5.3.1 source code and trying to
build 
> it there on the Linux machine. 
> [...]
> /usr/lib/libpopt.so: could not read symbols: File in wrong format

Looks like you're building on x86-64. Please use

 LDFLAGS=-L/usr/lib64 ./configure ... && make

for building, then.

> and also when i try to compile only the perl module, i get the
following 
> error
> 
> no-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE 
> -D_FILE_OFFSET
> _BITS=64 -I/usr/include/gdbm -O2 -g -pipe -m64   -DVERSION=\"5.0301\" 
> -DXS_VERSI
> ON=\"5.0301\" -fPIC 
> "-I/usr/lib64/perl5/5.8.5/x86_64-linux-thread-multi/CORE"
> default_store.c
> cc1: error: unrecognized command line option "-fstack-protector"
> cc1: error: invalid parameter `ssp-buffer-size'
> default_store.c:1: error: CPU you selected does not support x86-64 
> instruction s
> et
> default_store.c:1: error: bad value (generic) for -mtune= switch
> make[1]: *** [default_store.o] Error 1
> make[1]: Leaving directory 
> `/home/amit/netsnmp/net-snmp-5.3.1/perl/default_store

Please give a full line of compiler options instead of the truncated one
above. What distro is this? What's the output of "perl -V"? Are you
using the same compiler (which version?) that has been used to compile
perl (you should)?


+Thomas

-- 
Thomas Anders (thomas.anders at blue-cable.de)

------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDE
V
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users