Re: Can We place Traps as part of Tables

Dear Mr Dave

Mistakenly I sent with out checking "CC" and I will take care that issue from now

My system is having 3 xDSL Interfaces, when ever an Alarm is genetrated
during the working of the xDSL Interface I should notify the manager with a
trap message that an alarm had occured

These are the alarms which I need to monitor "Local Pair 1", "Local Pair 2",
"Remote Pair 1" & "Remote Pair 2"

as I said I am having 3 xDSL Interfaces the above said 4 Alarms are
applicable to all the 3 Interfaces

So, My intention was rather than creating 4*3 Traps I tought to create table
and keep Traps as seperate Part

so this was the MIB's which I have created

-- xDSL Traps Table

xdsltrapTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF XDSLEntry
        MAX-ACCESS      not-accessible
        STATUS mandatory
        DESCRIPTION
                "A table of E1 switch port configuration information."
        ::= { xDSL 2 }

xdslEntry OBJECT-TYPE
        SYNTAX  XDSLEntry
        MAX-ACCESS      not-accessible
        STATUS mandatory
        DESCRIPTION
                "A table entry containing "
        INDEX   { interface1,interface2,interface3 }
        ::= { xdsltrapTable 1 }

XDSLEntry ::=
        SEQUENCE {
   InterfaceNo INTEGER,
   SystemType INTEGER,
   LocalPair1 INTEGER,
   LocalPair2 INTEGER,
   RemotePair1 INTEGER,
   RemotePair2 INTEGER
  }

TableCardNo OBJECT-TYPE
 SYNTAX INTEGER (1..3)
 ACCESS not-accessible
 STATUS mandatory
 DESCRIPTION
         " "
 ::= { xdslaEntry 1 }

SystemType OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
                " "
 ::= { xdslaEntry 2 }

LocalPair1 OBJECT-TYPE
 SYNTAX INTEGER
 ACCESS not-accessible
 STATUS mandatory
 DESCRIPTION
         " "
 ::= { xdslaEntry 3 }

LocalPair2 OBJECT-TYPE
 SYNTAX INTEGER
 ACCESS not-accessible
 STATUS mandatory
 DESCRIPTION
         " "
 ::= { xdslaEntry 4 }

RemotePair1 OBJECT-TYPE
 SYNTAX INTEGER
 ACCESS not-accessible
 STATUS mandatory
 DESCRIPTION
         " "
 ::= { xdslaEntry 5 }

RemotePair2 OBJECT-TYPE
 SYNTAX INTEGER
 ACCESS not-accessible
 STATUS mandatory
 DESCRIPTION
         " "
 ::= { xdslaEntry 6 }


when I started the code for this I got the confusion what OID i need to
Specify for particular entity

so to get the confirmation I asked you, which I am partially clear about

Now, I suppose  that I *cannot* do this way because I cannot define Index to
apply to the trap OID. which I came to know from your previous mail

>If you defined the MIB as a single table covering all four interfaces
>(so that the objects are the same in each case), then you would only
>need a single set of 6 traps.

how to I implement the above idea

thanks

santhosh

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users