Changing "Agent Address" in SNMP v1 traps
Dougal <[email protected]>
| Newsgroups | gmane.network.net-snmp.user |
|---|---|
| Message-ID | <[email protected]> |
Dear Listers, I have a problem I have been trying to solve for some time now and cannot seem to find a solution anywhere... Deployed on my servers Redhat with net-snmp-5.1.2-11.EL4.7. All of the servers are multi-homed with bond0(10.102.178.12) for data traffic and eth2(172.22.11.39) for management traffic. The problem is the "agent-addr" field in the SNMP v1 traps. It is sending the IP address of the data interface, bond0. This is causing issues with the network management software, which cannot associate the IP address with a defined management address. After some testing I have found that if the bond0 interface is down, then it send the eth2 ip address as the "agent-addr". This leads me to believe that the snmpd is sending the first active interface configured and up on the box. Has anybody had to solve this issue before? -- Dougal Ballantyne *Hippotje Limited* [email protected] <mailto:[email protected]> Tel: +31 (646) 733 596 (NL) Tel: +1 (425) 296 2520 (US) Skype: ballantyneds <skype:ballantynds?call> ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users