Re: [mib2c, IEEE802dot110MIB] Using mib2c to generate code with IEEE802dot-MIB

       Hi  Dave:
              May be I said not clearly.
               Yes,  5.3.1 installation compiled from pure source.
                I have put IEEE802dot11-MIB.txt to
                "/usr/local/share/snmp/mibs/" .
                Using snmptranslate  command to test IEEE802dot11-MIB is OK.

                 For 5.3.1  or 5.4  source complie
                 Setp1 :  $> 
./configure --with-perl-modules --enable-embedded-perl --enable-shared
                 Step2:   $>  make
                 Step3:   $>  make   test
                 Step4:   $>  make   install
                 Step5:   $>  cp IEEE802dot11-MIB.txt 
/usr/local/share/snmp/mibs/
                 Step6:   $> snmptranslate  IEEE802dot11-MIB::ieee802dot11
                     IEEE802dot11-MIB::ieee802dot11
                 Step7:   $>  mib2c IEEE802dot11-MIB::ieee802dot11
                                    For 5.4 is OK.
                                    For 5.3.1 is Fail that said "You didn't 
give mib2c a valid OID to start with...."

               Thanks for your help.

BR,
Bowman Chen


----- Original Message ----- 
From: "Dave Shield" <[email protected]>
To: "bowmanchen" <[email protected]>
Cc: <[email protected]>
Sent: Wednesday, May 09, 2007 9:15 PM
Subject: Re: [mib2c, IEEE802dot110MIB] Using mib2c to generate code with
IEEE802dot-MIB


> On 08/05/07, bowmanchen <[email protected]> wrote:
>>    I want to use IEEE802dot-MIB.txt.  I have put it in
>> /usr/local/share/snmp/mibs  .
>>
>>   My problem is
>>           Using mib2c to generate code by NET-SNMP 5.4  is OK.
>>           Using mib2c to generate code by NET-SNMP 5.3.1  is fail.
>>
>>     Why I can't usign mib2c to generate code by NET-SNMP 5.3.1 ???
>
>
>
>>  For NET-SNMP 5.3.1 see following text:
>> You didn't give mib2c a valid OID to start with....
>
>
> Is the 5.3.1 installation compiled from source, or a vendor-supplied
> version?
> It may be that the library cannot find the IEEE802dot-MIB.txt file.
>
>
>> You might wish to start by reading the MIB loading tutorial at:
>>     http://www.net-snmp.org/tutorial-5/commands/mib-options.html
>> And making sure you can get snmptranslate to display information about
>> your MIB node.
>
> Does the 5.3.1 version of snmptranslate display information about this
> MIB?
>
> Dave

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users