Wrong interface speed for bonding interfaces.

I have a problem getting snmpd to report the "correct" interface speed
for a couple of bonding interfaces.

Enviroment:

NET-SNMP version:  5.1.2 on RedHat Enterprise Linux 4 x86-54 (update 4)

I have 2 bonding interfaces:

bond0 (eth0, eth2)
bond1 (eth1, eth3)

IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: bond0
IF-MIB::ifDescr.3 = STRING: bond1
IF-MIB::ifDescr.4 = STRING: eth0
IF-MIB::ifDescr.5 = STRING: eth1
IF-MIB::ifDescr.6 = STRING: eth2
IF-MIB::ifDescr.7 = STRING: eth3

IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.4 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.5 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.6 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.7 = INTEGER: ethernetCsmacd(6)

IF-MIB::ifSpeed.1 = Gauge32: 10000000
IF-MIB::ifSpeed.2 = Gauge32: 10000000
IF-MIB::ifSpeed.3 = Gauge32: 10000000
IF-MIB::ifSpeed.4 = Gauge32: 1000000000
IF-MIB::ifSpeed.5 = Gauge32: 1000000000
IF-MIB::ifSpeed.6 = Gauge32: 1000000000
IF-MIB::ifSpeed.7 = Gauge32: 1000000000

As you can see the interface speed is not correct for the bonding
interfaces. I have tried to modify the snmpd.conf to set the interface
speed manually:

interface bond* 6 1000000000

This does not seem to work, but I might have misunderstood the
snmpd.conf man page. Any hints?


Best regards,


Lars Erik Thorsplass

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users