-v 1 traps

Hi, all -

I'm running into some problems with -v1 traps.

>From my reading, the man page for snmptrap is incorrect.

I've gotten it to send traps with:

    # snmptrap -v 1 -c public \
                        {dest IP}:162 \
                        {ent oid} \
                        {agent IP} \
                        6 \
                        2000 \
                        ''

... but all I can do is get it to show up in -d dumps, not the decoded
traps, and I also can't get it to show up at all in MG-soft's
browser/trap ringer console.

A 2000 trap is defined properly (with no varbinds) in our MIB as
.1.3.6.1.4.674.10892.2.20.2000, and the e-oid I'm using is
.1.3.6.1.4.674.10892.2.20.

Before I switched to -v 1 traps, I could see the decoded trap in -v 2c
format, but we need to support legacy systems which only support -v 1.
What am I missing? The man page doesn't even mention a destination IP,
but it didn't work until I added it in  that location.

Any ideas?

TIA!
--
Don Wilde                           512-723-8255
Dell, Incorporated         Austin, Texas, USA


-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users