how to show processes with net-snmp-5.4.1rc3 on HP-UX 11.23 (Was: Re: net-snmp 5.3.1 on HP-UX 11.23 only returns the first 10 processes - how to show all processes?)

"Aleksey Tsalolikhin" <[email protected]> Thu, 19 Jul 2007 05:43:04 -0700
Newsgroups	gmane.network.net-snmp.user
Message-ID	<[email protected]>
Hi.  With net-snmp 5.4.1rc3 on HP-UX 11.23 box I am trying to display
running processes (hrSWRun).  My SNMP monitoring program is Solar
Winds (from solarwinds.net).

When I try to look at running processes, Solar Winds tells me that the
host does not support the Host Resources MIB.

Running snmpd with -d switch, I see the query,

Received SNMP packet(s) from UDP: [172.18.1.118]:1134
  GETBULK message, non-rep=0, max_rep=20
    -- HOST-RESOURCES-MIB::hrSWRunName

and then the reply, which looks like a bunch of zero's.

In WireShark, the response is decoded as:

Simple Network Management Protocol
    version: v2c (1)
    community: mycommunitystring
    data: get-response (2)
        get-response
            request-id: 5831
            error-status: noError (0)
            error-index: 0
            variable-bindings: 20 items
                Item
                    name: 1.3.6.1.2.1.25.6.1.0 (SNMPv2-SMI::mib-2.25.6.1.0)
                    valueType: value (0)
                        value: simple (4294967295)
                        value: simple (4294967295)
                            application-wide: timeticks-value (3)
                                timeticks-value: 0
                Item
                    name: 1.3.6.1.2.1.25.6.2.0 (SNMPv2-SMI::mib-2.25.6.2.0)
                    valueType: value (0)
                        value: simple (4294967295)
                        value: simple (4294967295)
                            application-wide: timeticks-value (3)
                                timeticks-value: 0
                Item
                    name: 1.3.6.1.2.1.25.6.3.1.1.1
(SNMPv2-SMI::mib-2.25.6.3.1.1.1)
                    valueType: value (0)
                        value: simple (4294967295)
                            simple: integer-value (0)
                                Value: INTEGER: 1
                Item
                    name: 1.3.6.1.2.1.25.6.3.1.1.2
(SNMPv2-SMI::mib-2.25.6.3.1.1.2)
                    valueType: value (0)
                        value: simple (4294967295)
                            simple: integer-value (0)
                                Value: INTEGER: 2
                Item
                    name: 1.3.6.1.2.1.25.6.3.1.1.3
(SNMPv2-SMI::mib-2.25.6.3.1.1.3)
                    valueType: value (0)
                        value: simple (4294967295)
                            simple: integer-value (0)
                                Value: INTEGER: 3
                Item
                    name: 1.3.6.1.2.1.25.6.3.1.1.4
(SNMPv2-SMI::mib-2.25.6.3.1.1.4)
                    valueType: value (0)
                        value: simple (4294967295)
                            simple: integer-value (0)
                                Value: INTEGER: 4
                Item
                    name: 1.3.6.1.2.1.25.6.3.1.1.5
(SNMPv2-SMI::mib-2.25.6.3.1.1.5)
                    valueType: value (0)
                        value: simple (4294967295)
                            simple: integer-value (0)
                                Value: INTEGER: 5
                Item
                    name: 1.3.6.1.2.1.25.6.3.1.1.6
(SNMPv2-SMI::mib-2.25.6.3.1.1.6)
                    valueType: value (0)
                        value: simple (4294967295)
                            simple: integer-value (0)
                                Value: INTEGER: 6
                Item
                    name: 1.3.6.1.2.1.25.6.3.1.1.7
(SNMPv2-SMI::mib-2.25.6.3.1.1.7)
                    valueType: value (0)
                        value: simple (4294967295)
                            simple: integer-value (0)
                                Value: INTEGER: 7
                Item
                    name: 1.3.6.1.2.1.25.6.3.1.1.8
(SNMPv2-SMI::mib-2.25.6.3.1.1.8)
                    valueType: value (0)
                        value: simple (4294967295)
                            simple: integer-value (0)
                                Value: INTEGER: 8
                Item
                    name: 1.3.6.1.2.1.25.6.3.1.1.9
(SNMPv2-SMI::mib-2.25.6.3.1.1.9)
                    valueType: value (0)
                        value: simple (4294967295)
                            simple: integer-value (0)
                                Value: INTEGER: 9
                Item
                    name: 1.3.6.1.2.1.25.6.3.1.1.10
(SNMPv2-SMI::mib-2.25.6.3.1.1.10)
                    valueType: value (0)
                        value: simple (4294967295)


And, unlike with my net-snmp 5.3.1 (see email history below), snmpwalk
of my 5.4.1rc3 does not return any processes at all:

./snmpwalk -v 2c -c public -On [host]
...
.1.3.6.1.2.1.25.3.8.1.9.6 = STRING: 0-1-1,0:0:0.0
.1.3.6.1.2.1.25.3.8.1.9.7 = STRING: 0-1-1,0:0:0.0
.1.3.6.1.2.1.25.3.8.1.9.8 = STRING: 0-1-1,0:0:0.0
.1.3.6.1.2.1.25.6.1.0 = Timeticks: (0) 0:00:00.00
.1.3.6.1.2.1.25.6.2.0 = Timeticks: (0) 0:00:00.00
.1.3.6.1.2.1.25.6.3.1.1.1 = INTEGER: 1
.1.3.6.1.2.1.25.6.3.1.1.2 = INTEGER: 2
.1.3.6.1.2.1.25.6.3.1.1.3 = INTEGER: 3
...

There is no .1.3.6.1.2.1.25.4 section.  it just goes from
.1.3.6.1.2.1.25.3 to .1.3.6.1.2.1.25.6.


How can I have the net-snmp-5.4.1rc3 show the hrSWRun running processes, please?

Thanks,
Aleksey


On 6/22/07, Aleksey Tsalolikhin <[email protected]> wrote:
> Hello,
>
>  I am trying to get process monitoring to work with net-snmp 5.3.1
> from HP's Internet Express (open source) library on HP-UX 11.23
> (Itanium).
>
>  net-snmp daemon returns only the first 10 processes in the process table:
>
> ./snmpwalk -v 2c -c public -On [host]
>
> ...
> .1.3.6.1.2.1.25.4.2.1.2.0 = STRING: "swapper"
> .1.3.6.1.2.1.25.4.2.1.2.1 = STRING: "init"
> .1.3.6.1.2.1.25.4.2.1.2.8 = STRING: "kmemdaemon"
> .1.3.6.1.2.1.25.4.2.1.2.9 = STRING: "ioconfigd"
> .1.3.6.1.2.1.25.4.2.1.2.10 = STRING: "ObjectThreadPool"
> .1.3.6.1.2.1.25.4.2.1.2.11 = STRING: "nfsktcpd"
> .1.3.6.1.2.1.25.4.2.1.2.12 = STRING: "autofskd"
> .1.3.6.1.2.1.25.4.2.1.2.13 = STRING: "lvmkd"
> .1.3.6.1.2.1.25.4.2.1.2.14 = STRING: "lvmkd"
> .1.3.6.1.2.1.25.4.2.1.2.15 = STRING: "lvmkd"
> .1.3.6.1.2.1.25.4.2.1.3.0 = OID: .0.0
> .1.3.6.1.2.1.25.4.2.1.3.1 = OID: .0.0
> .1.3.6.1.2.1.25.4.2.1.3.8 = OID: .0.0
> .1.3.6.1.2.1.25.4.2.1.3.9 = OID: .0.0
> .1.3.6.1.2.1.25.4.2.1.3.10 = OID: .0.0
> .1.3.6.1.2.1.25.4.2.1.3.11 = OID: .0.0
> .1.3.6.1.2.1.25.4.2.1.3.12 = OID: .0.0
> .1.3.6.1.2.1.25.4.2.1.3.13 = OID: .0.0
> .1.3.6.1.2.1.25.4.2.1.3.14 = OID: .0.0
> .1.3.6.1.2.1.25.4.2.1.3.15 = OID: .0.0
> .1.3.6.1.2.1.25.4.2.1.4.0 = STRING: "swapper"
> .1.3.6.1.2.1.25.4.2.1.4.1 = STRING: "init"
> .1.3.6.1.2.1.25.4.2.1.4.8 = STRING: "kmemdaemon"
> .1.3.6.1.2.1.25.4.2.1.4.9 = STRING: "ioconfigd"
> .1.3.6.1.2.1.25.4.2.1.4.10 = STRING: "ObjectThreadPool"
> .1.3.6.1.2.1.25.4.2.1.4.11 = STRING: "nfsktcpd"
> .1.3.6.1.2.1.25.4.2.1.4.12 = STRING: "autofskd"
> .1.3.6.1.2.1.25.4.2.1.4.13 = STRING: "lvmkd"
> .1.3.6.1.2.1.25.4.2.1.4.14 = STRING: "lvmkd"
> .1.3.6.1.2.1.25.4.2.1.4.15 = STRING: "lvmkd"
> .1.3.6.1.2.1.25.4.2.1.5.0 = ""
> .1.3.6.1.2.1.25.4.2.1.5.1 = ""
> .1.3.6.1.2.1.25.4.2.1.5.8 = ""
> ...
>
> What about all the other processes?   What can I do to get the full
> list?  I want to monitor the Oracle processes.
>
> Sincerely,
> Aleksey
>

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users