Fwd: [Openhpi-devel] Subagent Implementation

I was also curious about this...

---------- Forwarded message ----------
From: Leon Jacob <[email protected]>
Date: Oct 30, 2007 7:57 PM
Subject: [Openhpi-devel] Subagent Implementation
To: [email protected]


I'm trying to implement the sensor table, from the IPMI document,
What mib2c option should i be using?

mib2c.array-user.conf, [ i'm confused as hpi-subagent uses this but
this data should be fetched using the ipmi inteface from a elsewhere.]
mib2c.iterate.conf  [ I thought this should be used. ]
or  mib2c.mfd.conf [ looks like safe bet.]

- leo

sensorTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SensorEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table defining the staic sensor data found in the
         Sensor Resource Data Repository."
    ::= { SensorManagement 1 }

sensorEntry OBJECT-TYPE
    SYNTAX      SensorEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
           ""
    INDEX   { sensorIndex }
    ::= { sensorTable 1 }

-- should this have fruid to identify which FRU this sensor belongs to??
SensorEntry ::= SEQUENCE {
    -- Sensor Header Begin
    sensorIndex                             INTEGER,          -- 01  (2 bytes)
    sensorSdrVersion                        Integer32,        -- 02  (1Byte )
    sensorRecordType                       Integer32,        -- 03 (1 Byte)
    --sensorRecordLen                       Integet32,        -- (1 Byte)
    -- Sensor Header End

    -- Record "KEY" Bytes Begin
    sensorOwnerId                           Integer32,        -- 04 (1 Byte)
    sensorOwnerLun                          Integer32,        -- 05 (1Byte)
    sensorNumber                            Integer32,        -- 06 (1 Byte)
    -- Record "KEY" Bytes End

    -- Record Body Begin
    sensorEntityId                          Integer32,        -- 07 (1 Byte)
    sensorEntityInstance                    Integer32,        -- 08 (1 Byte)
    sensorInitialization                    Integer32,        -- 09 (1 Byte)
    sensorCapabilities                      Integer32,        -- 10 (1 Byte)
    sensorType                              INTEGER,          -- 11(1 Byte)
    sensorEvent                             INTEGER,          -- 12
(1 Byte) Event/Reading Type Code.
    sensorAssertionEventMask                Integer32,        -- 13 (2 Bytes)
    sensorDeassertionEventMask              Integer32,        -- 14 (2 Bytes)
    sensorDiscreteReadMask                              Integer32,
   -- 15 (2 Bytes)
    sensorUnits                             Integer32,        -- 16 (1 Byte)
    sensorBaseUnit                          Integer32,        -- 17 (1 Byte)
    sensorModifierUnit                      Integer32,        -- 18 (1 Byte)
    sensorLinearization                     Integer32,        -- 19(1 Byte)
    sensorM                                 Integer32,        -- 20(1 Byte)
    sensorMTolerance                         Integer32,        -- 21(1 Byte)
    sensorB                                 Integer32,        -- 22(1 Byte)
    sensorBAccuracy                          Integer32,        -- 23(1 Byte)
    sensorAccuracyExp                       Integer32,        -- 24(1 Byte)
    sensorRExp                              Integer32,        -- 25(1 Byte)
    sensorBExp                              Integer32,        -- 26(1 Byte)
    sensorCharacteristicFlags               Integer32,        -- 27(1 Byte)
    sensorNominalReading                    Integer32,        -- 28(1 Byte)
    sensorNormalMaximum                     Integer32,        -- 29(1 Byte)
    sensorNormalMinimum                     Integer32,        -- 30(1 Byte)
    sensorMaximumReading                    Integer32,        -- 31(1 Byte)
    sensorMinimumReading                    Integer32,        -- 32(1 Byte)
    sensorUpperNonRecoverableThreshold      Integer32,        -- 33(1 Byte)
    sensorUpperCriticalThreshold            Integer32,        -- 34(1 Byte)
    sensorUpperNonCriticalThreshold         Integer32,        -- 35(1 Byte)
    sensorLowerNonRecoverableThreshold      Integer32,        -- 36(1 Byte)
    sensorLowerCriticalThreshold            Integer32,        -- 37(1 Byte)
    sensorLowerNonCriticalThreshold         Integer32,        -- 38(1 Byte)
    sensorPositiveGoingThresholdHysteresis  Integer32,        -- 39(1 Byte)
    sensorNegativeGoingThresholdHysteresis  Integer32,        -- 40(1 Byte)
    -- ignore the two reserved bytes for now
    sensorOem                               Integer32,        -- 41(1 Byte)
    sensorIdStringType                      Integer32,        -- 42
Type/Len (1Byte)
    sensorIdString                          DisplayString     -- 43
(max 16 Bytes)
    }


-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Openhpi-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openhpi-devel

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users