Re: restarting snmpd does not generate a trap
"Dave Shield" <[email protected]>
| Newsgroups | gmane.network.net-snmp.user |
|---|---|
| Message-ID | <[email protected]> |
On 07/12/2007, PoWah Wong <[email protected]> wrote: > How to find out whether restarting snmpd has generated > the trap on net-snmp 5.4.1? The easiest way is to run either the SNMP agent or the trap receiver using the '-d' option. That will dump the raw SNMP packets as they are sent/received (*before* any access control checks that might discard an incoming trap). > Because the snmptrapd received the trap from a RH7.2 > running net-snmp 5.0.9, but did not receive any trap > from a FC6 machine running net-snmp 5.4.1, so I > suspect that the FC6 machine do not generate any trap. If it's the exact same trapd, then I suspect you are correct. Silly question: What does the snmpd.conf file on the FC6 machine look like? Have you actually configured this agent to send traps to your trap receiver? Dave ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users