problem with ucdavis MIBs

hi there.
i have two working installs of cacti using snmp to retrieve iptables
bandwidth (using exec() in snmpd.conf)

1)-- one server is running debian and it works fine:

(from snmpd.conf)
exec .1.3.6.1.4.1.2021.49 iplist /root/iptables_traffic_iplist.sh -g
exec .1.3.6.1.4.1.2021.49.42 ipindex /root/iptables_traffic_iplist.sh -i
exec .1.3.6.1.4.1.2021.50 traffic_in /root/iptables_traffic_eval.sh in
exec .1.3.6.1.4.1.2021.51 traffic_out /root/iptables_traffic_eval.sh out

# snmpwalk -v 2c -c public localhost .1.3.6.1.4.1.2021.49

UCD-SNMP-MIB::ucdavis.49.1.1 = INTEGER: 1
UCD-SNMP-MIB::ucdavis.49.2.1 = STRING: "iplist"
UCD-SNMP-MIB::ucdavis.49.3.1 = STRING:
"/usr/local/sbin/snmp_ips/iptables_traffic_iplist.sh -g"
UCD-SNMP-MIB::ucdavis.49.42.1.1 = INTEGER: 1
UCD-SNMP-MIB::ucdavis.49.42.2.1 = STRING: "ipindex"
UCD-SNMP-MIB::ucdavis.49.42.3.1 = STRING:
"/usr/local/sbin/snmp_ips/iptables_traffic_iplist.sh -i"
UCD-SNMP-MIB::ucdavis.49.42.100.1 = INTEGER: 2
UCD-SNMP-MIB::ucdavis.49.42.101.1 = STRING: "1"
UCD-SNMP-MIB::ucdavis.49.42.101.2 = STRING: "2"
UCD-SNMP-MIB::ucdavis.49.42.102.1 = INTEGER: 0
[..cut..]

2)-- second server is running Slackware and has problems:

(from snmpd.conf)
exec .1.3.6.1.4.1.2021.49 iplist /root/iptables_traffic_iplist.sh -g
exec .1.3.6.1.4.1.2021.49.42 ipindex /root/iptables_traffic_iplist.sh -i
exec .1.3.6.1.4.1.2021.50 traffic_in /root/iptables_traffic_eval.sh in
exec .1.3.6.1.4.1.2021.51 traffic_out /root/iptables_traffic_eval.sh out

# snmpwalk -v 2c -c public localhost .1.3.6.1.4.1.2021.49

UCD-SNMP-MIB::ucdavis.49 = No Such Object available on this agent at
this OID

but if i remove the OID part fron exec
(ie. "exec iplist /root/iptables_traffic_iplist.sh -g" ) this query
returns the values i'm looking for (so exec() is executed correctly)

# snmpwalk -v 2c -c pr-public localhost UCD-SNMP-MIB::extOutput 
UCD-SNMP-MIB::extOutput.1 = STRING: 192.168.200.161
UCD-SNMP-MIB::extOutput.2 = STRING: 1
UCD-SNMP-MIB::extOutput.3 = STRING: 254
UCD-SNMP-MIB::extOutput.4 = STRING: 296

so, the simple question is: what is happening?
how can i make things working on slack install?

thanks and cheers!

-- 
Ernesto Franchini <[email protected]>
Linux System Administrator
http://www.catb.org/~esr/faqs/smart-questions.html
http://www.antagonism.org/qmr-faq.shtml
http://www.thedjbway.org/

Prodigit SRL                                                   _
Via Mecenate 76/9 - 20138 Milano        ASCII ribbon campaign ( )
Tel. 02/509081 - Fax. 02/50908080        - against HTML email  X
www.prodigit.it                                      & vCards / \

"Madness, like small fish, runs in hosts, in vast numbers of instances."

- You may now sacrifice $PAGAN_OBJECT to $FAVOURITE_DIETY and reboot
                           into your newly installed Slackware on Raid -

-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users