Cannot start snmp handler application
Vladimir Kovacevic <[email protected]>
| Newsgroups | gmane.network.net-snmp.user |
|---|---|
| Message-ID | <[email protected]> |
Hi! I'm working on embedded linux system on AT91SAM 9260, timesys glibc RPMS and problem with starting handler program for net-snmp: I wrote the test handler in C, built it and placed it on /bin/snmp_handler. /etc/snmpd.conf: pass .1.3.6.1.4.1 /bin/snmp_handler #Also tried with .1.3.6.1.4.1.1984 didn't work. #Every OID within enterprise root should be send to this handler (just for test) After loading MIB file in client program (iReasoning) and give command get for some variable I get response: Snmp No such Object. SNMPD is started with options: snmpd -m /usr/share/snmp/mibs/ROUTER-MIB.txt -c /etc/snmp/snmpd.conf -Lf /var/snmp.out After issuing get command in a log file i get: could not open /proc/net/if_inet6 NET-SNMP version 5.3 Connection from UDP: [192.168.125.101]:2110 Connection from UDP: [192.168.125.101]:2111 cannot open /proc/net/snmp6 ... What is the problem? Attachment: Source C code for handler program, MIB and snmpd.conf Thanks in advance! ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users
ROUTER-MIB.txt
(text/plain, 1.8 KB)
ROUTER-SNMP-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises,
MODULE-IDENTITY,
OBJECT-TYPE
FROM SNMPv2-SMI;
sandar MODULE-IDENTITY
LAST-UPDATED "200712031024Z" -- Dec 3, 2007 10:24:00 AM
ORGANIZATION "OmegaTech"
CONTACT-INFO
""
DESCRIPTION
""
REVISION "200712031024Z" -- Dec 3, 2007 10:24:00 AM
DESCRIPTION
"Initial version."
-- 1.3.6.1.4.1.1984
::= { enterprises 1984 }
hdTVrouter OBJECT IDENTIFIER
-- 1.3.6.1.4.1.1984.1
::= { sandar 1 }
msCommands OBJECT IDENTIFIER
-- 1.3.6.1.4.1.1984.1.1
::= { hdTVrouter 1 }
connect OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set crosspoint.
Format: <input>x<output>
Example: 13x5 "
-- 1.3.6.1.4.1.1984.1.1.1
::= { msCommands 1 }
disconnect OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disconnect crosspoint.
Format: <input>
Example: 4"
-- 1.3.6.1.4.1.1984.1.1.2
::= { msCommands 2 }
signalType OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get signal type."
-- 1.3.6.1.4.1.1984.1.1.3
::= { msCommands 3 }
list OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"List all crosspoints."
-- 1.3.6.1.4.1.1984.1.1.4
::= { msCommands 4 }
dimension OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return router matrix dimensions."
-- 1.3.6.1.4.1.1984.1.1.5
::= { msCommands 5 }
temperature OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return temperature."
-- 1.3.6.1.4.1.1984.1.1.6
::= { msCommands 6 }
voltage OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return voltages"
-- 1.3.6.1.4.1.1984.1.1.7
::= { msCommands 7 }
END
snmp_handler.c
(text/plain, 1.3 KB)
/************************************************************************************\ * * Name: snmp_handler.c * Author: Vladimir Kovacevic, [email protected], OmegaTech Beograd * Description: Handler, started by snmpd, for processing requests from users * Modules: None * Compiler: armv5l-linux-gcc-4.1.0 * \**************************************************************************************/ #include <stdio.h> #include <string.h> #include <stdlib.h> #include <fcntl.h> #define OUTPUT_FILE "/var/snmp.out" int file;// file descriptor for output file char buffer[100];// buffer for write to file int main(int argc, char** argv) { int i = 0; int da; // return value from writing to file if( (file = open(OUTPUT_FILE, O_WRONLY | O_APPEND | O_CREAT,0777))== -1) { //printf("\nERROR opening snmp.out"); return 1; } // write prog args to file, testing for (i = 0; i < argc; i++) { sprintf(buffer, "%2d : %s\n", i, argv[i]); da=write(file,buffer,strlen(buffer)); if(da!=strlen(buffer)) return 2; } if(argc==2){ printf("%s\n", argv[2]); printf("string\n"); printf("Vlada\n"); } else if (argc==4){ for (i = 0; i < argc; i++) { sprintf(buffer, "SET %2d : %s\n", i, argv[i]); da=write(file,buffer,strlen(buffer)); if(da!=strlen(buffer)) return 2; } } return 0; }
snmpd.conf
(text/plain, 18.2 KB)
############################################################################### # # snmpd.conf: # An example configuration file for configuring the ucd-snmp snmpd agent. # ############################################################################### # # This file is intended to only be as a starting point. Many more # configuration directives exist than are mentioned in this file. For # full details, see the snmpd.conf(5) manual page. # # All lines beginning with a '#' are comments and are intended for you # to read. All other lines are configuration commands for the agent. ############################################################################### # Access Control ############################################################################### # As shipped, the snmpd demon will only respond to queries on the # system mib group until this file is replaced or modified for # security purposes. Examples are shown below about how to increase the # level of access. # By far, the most common question I get about the agent is "why won't # it work?", when really it should be "how do I configure the agent to # allow me to access it?" # # By default, the agent responds to the "public" community for read # only access, if run out of the box without any configuration file in # place. The following examples show you other ways of configuring # the agent so that you can change the community names, and give # yourself write access to the mib tree as well. # # For more information, read the FAQ as well as the snmpd.conf(5) # manual page. #### # First, map the community name "public" into a "security name" # sec.name source community com2sec notConfigUser default public #### # Second, map the security name into a group name: # groupName securityModel securityName group notConfigGroup v1 notConfigUser group notConfigGroup v2c notConfigUser #### # Third, create a view for us to let the group have rights to: # Make at least snmpwalk -v 1 localhost -c public system fast again. # name incl/excl subtree mask(optional) view systemview included .1.3.6.1.2.1.1 view systemview included .1.3.6.1.2.1.25.1.1 #### # Finally, grant the group read-only access to the systemview view. # group context sec.model sec.level prefix read write notif access notConfigGroup "" any noauth exact systemview none none # ----------------------------------------------------------------------------- # Here is a commented out example configuration that allows less # restrictive access. # YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY # KNOWN AT YOUR SITE. YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO # SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE. ## sec.name source community #com2sec local localhost COMMUNITY #com2sec mynetwork NETWORK/24 COMMUNITY ## group.name sec.model sec.name #group MyRWGroup any local #group MyROGroup any mynetwork # #group MyRWGroup any otherv3user #... ## incl/excl subtree mask #view all included .1 80 ## -or just the mib2 tree- #view mib2 included .iso.org.dod.internet.mgmt.mib-2 fc ## context sec.model sec.level prefix read write notif #access MyROGroup "" any noauth 0 all none none #access MyRWGroup "" any noauth 0 all all all ############################################################################### # Sample configuration to make net-snmpd RFC 1213. # Unfortunately v1 and v2c don't allow any user based authentification, so # opening up the default config is not an option from a security point. # # WARNING: If you uncomment the following lines you allow write access to your # snmpd daemon from any source! To avoid this use different names for your # community or split out the write access to a different community and # restrict it to your local network. # Also remember to comment the syslocation and syscontact parameters later as # otherwise they are still read only (see FAQ for net-snmp). # # First, map the community name "public" into a "security name" # sec.name source community #com2sec notConfigUser default public # Second, map the security name into a group name: # groupName securityModel securityName #group notConfigGroup v1 notConfigUser #group notConfigGroup v2c notConfigUser # Third, create a view for us to let the group have rights to: # Open up the whole tree for ro, make the RFC 1213 required ones rw. # name incl/excl subtree mask(optional) #view roview included .1 #view rwview included system.sysContact #view rwview included system.sysName #view rwview included system.sysLocation #view rwview included interfaces.ifTable.ifEntry.ifAdminStatus #view rwview included at.atTable.atEntry.atPhysAddress #view rwview included at.atTable.atEntry.atNetAddress #view rwview included ip.ipForwarding #view rwview included ip.ipDefaultTTL #view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteDest #view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteIfIndex #view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric1 #view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric2 #view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric3 #view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric4 #view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteType #view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteAge #view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMask #view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric5 #view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaIfIndex #view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaPhysAddress #view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaNetAddress #view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaType #view rwview included tcp.tcpConnTable.tcpConnEntry.tcpConnState #view rwview included egp.egpNeighTable.egpNeighEntry.egpNeighEventTrigger #view rwview included snmp.snmpEnableAuthenTraps # Finally, grant the group read-only access to the systemview view. # group context sec.model sec.level prefix read write notif #access notConfigGroup "" any noauth exact roview rwview none ############################################################################### # System contact information # # It is also possible to set the sysContact and sysLocation system # variables through the snmpd.conf file: syslocation Unknown (edit /etc/snmp/snmpd.conf) syscontact Root <root@localhost> (configure /etc/snmp/snmp.local.conf) # Example output of snmpwalk: # % snmpwalk -v 1 localhost -c public system # system.sysDescr.0 = "SunOS name sun4c" # system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.sunos4 # system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55 # system.sysContact.0 = "Me <[email protected]>" # system.sysName.0 = "name" # system.sysLocation.0 = "Right here, right now." # system.sysServices.0 = 72 # ----------------------------------------------------------------------------- ############################################################################### # Process checks. # # The following are examples of how to use the agent to check for # processes running on the host. The syntax looks something like: # # proc NAME [MAX=0] [MIN=0] # # NAME: the name of the process to check for. It must match # exactly (ie, http will not find httpd processes). # MAX: the maximum number allowed to be running. Defaults to 0. # MIN: the minimum number to be running. Defaults to 0. # # Examples (commented out by default): # # Make sure mountd is running #proc mountd # Make sure there are no more than 4 ntalkds running, but 0 is ok too. #proc ntalkd 4 # Make sure at least one sendmail, but less than or equal to 10 are running. #proc sendmail 10 1 # A snmpwalk of the process mib tree would look something like this: # # % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.2 # enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1 # enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2 # enterprises.ucdavis.procTable.prEntry.prIndex.3 = 3 # enterprises.ucdavis.procTable.prEntry.prNames.1 = "mountd" # enterprises.ucdavis.procTable.prEntry.prNames.2 = "ntalkd" # enterprises.ucdavis.procTable.prEntry.prNames.3 = "sendmail" # enterprises.ucdavis.procTable.prEntry.prMin.1 = 0 # enterprises.ucdavis.procTable.prEntry.prMin.2 = 0 # enterprises.ucdavis.procTable.prEntry.prMin.3 = 1 # enterprises.ucdavis.procTable.prEntry.prMax.1 = 0 # enterprises.ucdavis.procTable.prEntry.prMax.2 = 4 # enterprises.ucdavis.procTable.prEntry.prMax.3 = 10 # enterprises.ucdavis.procTable.prEntry.prCount.1 = 0 # enterprises.ucdavis.procTable.prEntry.prCount.2 = 0 # enterprises.ucdavis.procTable.prEntry.prCount.3 = 1 # enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 = 1 # enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 = 0 # enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 = 0 # enterprises.ucdavis.procTable.prEntry.prErrMessage.1 = "No mountd process running." # enterprises.ucdavis.procTable.prEntry.prErrMessage.2 = "" # enterprises.ucdavis.procTable.prEntry.prErrMessage.3 = "" # enterprises.ucdavis.procTable.prEntry.prErrFix.1 = 0 # enterprises.ucdavis.procTable.prEntry.prErrFix.2 = 0 # enterprises.ucdavis.procTable.prEntry.prErrFix.3 = 0 # # Note that the errorFlag for mountd is set to 1 because one is not # running (in this case an rpc.mountd is, but thats not good enough), # and the ErrMessage tells you what's wrong. The configuration # imposed in the snmpd.conf file is also shown. # # Special Case: When the min and max numbers are both 0, it assumes # you want a max of infinity and a min of 1. # # ----------------------------------------------------------------------------- ############################################################################### # Executables/scripts # # # You can also have programs run by the agent that return a single # line of output and an exit code. Here are two examples. # # exec NAME PROGRAM [ARGS ...] # # NAME: A generic name. # PROGRAM: The program to run. Include the path! # ARGS: optional arguments to be passed to the program # a simple hello world #exec echotest /bin/echo hello world # Run a shell script containing: # # #!/bin/sh # echo hello world # echo hi there # exit 35 # # Note: this has been specifically commented out to prevent # accidental security holes due to someone else on your system writing # a /tmp/shtest before you do. Uncomment to use it. # #exec shelltest /bin/sh /tmp/shtest # Then, # % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.8 # enterprises.ucdavis.extTable.extEntry.extIndex.1 = 1 # enterprises.ucdavis.extTable.extEntry.extIndex.2 = 2 # enterprises.ucdavis.extTable.extEntry.extNames.1 = "echotest" # enterprises.ucdavis.extTable.extEntry.extNames.2 = "shelltest" # enterprises.ucdavis.extTable.extEntry.extCommand.1 = "/bin/echo hello world" # enterprises.ucdavis.extTable.extEntry.extCommand.2 = "/bin/sh /tmp/shtest" # enterprises.ucdavis.extTable.extEntry.extResult.1 = 0 # enterprises.ucdavis.extTable.extEntry.extResult.2 = 35 # enterprises.ucdavis.extTable.extEntry.extOutput.1 = "hello world." # enterprises.ucdavis.extTable.extEntry.extOutput.2 = "hello world." # enterprises.ucdavis.extTable.extEntry.extErrFix.1 = 0 # enterprises.ucdavis.extTable.extEntry.extErrFix.2 = 0 # Note that the second line of the /tmp/shtest shell script is cut # off. Also note that the exit status of 35 was returned. # ----------------------------------------------------------------------------- ############################################################################### # disk checks # # The agent can check the amount of available disk space, and make # sure it is above a set limit. # disk PATH [MIN=100000] # # PATH: mount path to the disk in question. # MIN: Disks with space below this value will have the Mib's errorFlag set. # Default value = 100000. # Check the / partition and make sure it contains at least 10 megs. #disk / 10000 # % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.9 # enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0 # enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F # enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 = "/dev/dsk/c201d6s0" # enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 = 10000 # enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 = 837130 # enterprises.ucdavis.diskTable.dskEntry.diskAvail.1 = 316325 # enterprises.ucdavis.diskTable.dskEntry.diskUsed.1 = 437092 # enterprises.ucdavis.diskTable.dskEntry.diskPercent.1 = 58 # enterprises.ucdavis.diskTable.dskEntry.diskErrorFlag.1 = 0 # enterprises.ucdavis.diskTable.dskEntry.diskErrorMsg.1 = "" # ----------------------------------------------------------------------------- ############################################################################### # load average checks # # load [1MAX=12.0] [5MAX=12.0] [15MAX=12.0] # # 1MAX: If the 1 minute load average is above this limit at query # time, the errorFlag will be set. # 5MAX: Similar, but for 5 min average. # 15MAX: Similar, but for 15 min average. # Check for loads: #load 12 14 14 # % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.10 # enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1 # enterprises.ucdavis.loadTable.laEntry.loadaveIndex.2 = 2 # enterprises.ucdavis.loadTable.laEntry.loadaveIndex.3 = 3 # enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 = "Load-1" # enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 = "Load-5" # enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 = "Load-15" # enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39 # enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31 # enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36 # enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 = "12.00" # enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 = "14.00" # enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 = "14.00" # enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.1 = 0 # enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.2 = 0 # enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.3 = 0 # enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.1 = "" # enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.2 = "" # enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.3 = "" # ----------------------------------------------------------------------------- ############################################################################### # Extensible sections. # # This alleviates the multiple line output problem found in the # previous executable mib by placing each mib in its own mib table: # Run a shell script containing: # # #!/bin/sh # echo hello world # echo hi there # exit 35 # # Note: this has been specifically commented out to prevent # accidental security holes due to someone else on your system writing # a /tmp/shtest before you do. Uncomment to use it. # # exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest # % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.50 # enterprises.ucdavis.50.1.1 = 1 # enterprises.ucdavis.50.2.1 = "shelltest" # enterprises.ucdavis.50.3.1 = "/bin/sh /tmp/shtest" # enterprises.ucdavis.50.100.1 = 35 # enterprises.ucdavis.50.101.1 = "hello world." # enterprises.ucdavis.50.101.2 = "hi there." # enterprises.ucdavis.50.102.1 = 0 # Now the Output has grown to two lines, and we can see the 'hi # there.' output as the second line from our shell script. # # Note that you must alter the mib.txt file to be correct if you want # the .50.* outputs above to change to reasonable text descriptions. # Other ideas: # # exec .1.3.6.1.4.1.2021.51 ps /bin/ps # exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top # exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq # ----------------------------------------------------------------------------- ############################################################################### # Pass through control. # # Usage: # pass MIBOID EXEC-COMMAND # # This will pass total control of the mib underneath the MIBOID # portion of the mib to the EXEC-COMMAND. # # Note: You'll have to change the path of the passtest script to your # source directory or install it in the given location. # # Example: (see the script for details) # (commented out here since it requires that you place the # script in the right location. (its not installed by default)) # pass .1.3.6.1.4.1.2021.255 /bin/sh /usr/local/local/passtest # % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.255 # enterprises.ucdavis.255.1 = "life the universe and everything" # enterprises.ucdavis.255.2.1 = 42 # enterprises.ucdavis.255.2.2 = OID: 42.42.42 # enterprises.ucdavis.255.3 = Timeticks: (363136200) 42 days, 0:42:42 # enterprises.ucdavis.255.4 = IpAddress: 127.0.0.1 # enterprises.ucdavis.255.5 = 42 # enterprises.ucdavis.255.6 = Gauge: 42 # # % snmpget -v 1 localhost public .1.3.6.1.4.1.2021.255.5 # enterprises.ucdavis.255.5 = 42 # # % snmpset -v 1 localhost public .1.3.6.1.4.1.2021.255.1 s "New string" # enterprises.ucdavis.255.1 = "New string" # # For specific usage information, see the man/snmpd.conf.5 manual page # as well as the local/passtest script used in the above example. # Added for support of bcm5820 cards. pass .1.3.6.1.4.1 /bin/snmp_handler #pass .1.3.6.1.4.1 /bin/sh /bin/snmp_handler ############################################################################### # Further Information # # See the snmpd.conf manual page, and the output of "snmpd -H".