Re: Problem with Set
Jack G Atkinson Jr <[email protected]>
| Newsgroups | gmane.network.net-snmp.user |
|---|---|
| Message-ID | <[email protected]> |
Mike Ayers wrote: >> From: [email protected] >> [mailto:[email protected]] On >> Behalf Of Jack G Atkinson Jr >> > > > >> snmpget -v 1 -c 'public' 192.168.15.254 'adGenEasyBridgeIndexNext.0' >> ADTRAN-GENERIC-BRIDGE-MIB::adGenEasyBridgeIndexNext.0 = INTEGER: 28 >> >> snmpset -v 1 -c 'public' 192.168.15.254 >> 'adGenEasyBridgeRowStatus.28' i 5 >> Timeout: No Response from 192.168.15.254 >> >> Whatever, I try to set, gets the same response. >> > > Check your community name. Most "hack me" installations use the "private" community for writing. Try setting the timeout very high, say 5 minutes, in case the processing is taking a very long time. I'm guessing you can use the adGenEasyBridgeIndexNext object to tell if the row create request was processed - if it does not increment, the request was probably not received. > > > HTH, > > Mike > > It was the community name. Private did the trick. Thanks. -- ------------------------------------------------------------------ Jack G. Atkinson Jr. [email protected] Romans 5:6-10 - God loved us while we were unlovable! Luke 12:36-47 - Be ready! ------------------------------------------------------------------ ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users