Re: snmptrapd -- Cannot find TrapOID in TRAP2 PDU

OK, I got a little further.   I replaced the authcommunity with
disableauthorization.  Here is the trap I am receiving.  Where am I
going wrong?

Host: <UNKNOWN> (UDP: [207.97.221.101]:45677)
                 DISMAN-EVENT-MIB::sysUpTimeInstance  0:0:00:00.00
                           SNMPv2-MIB::snmpTrapOID.0
WEBSITEPULSE-NOTIFY-MIB::WEBSITEPULSE-NOTIFY-MIB.0
      WEBSITEPULSE-NOTIFY-MIB::WebSitePulseAlertType  "Simulation"
         WEBSITEPULSE-NOTIFY-MIB::WebSitePulseDomain  "test.domain.net"
    WEBSITEPULSE-NOTIFY-MIB::WebSitePulseTargetLabel  "Testlabel"
           WEBSITEPULSE-NOTIFY-MIB::WebSitePulseDate  "20040101000000"
   WEBSITEPULSE-NOTIFY-MIB::WebSitePulseResponseTime  Wrong Type
(should be INTEGER): "1.0000"
WEBSITEPULSE-NOTIFY-MIB::WebSitePulseSubscriberNames  "Test Name"
         WEBSITEPULSE-NOTIFY-MIB::WebSitePulseStatus  "Simulation"
       WEBSITEPULSE-NOTIFY-MIB::WebSitePulseDowntime  "12"
     WEBSITEPULSE-NOTIFY-MIB::WebSitePulseServerType  "HTTP"
            WEBSITEPULSE-NOTIFY-MIB::WebSitePulseUrl  "http://www.yoursite.com"
     WEBSITEPULSE-NOTIFY-MIB::WebSitePulseStepNumber  "6"
      WEBSITEPULSE-NOTIFY-MIB::WebSitePulseStepLabel  "Label Name"
       WEBSITEPULSE-NOTIFY-MIB::WebSitePulseRuleName  "Rule Name"




On Thu, Mar 27, 2008 at 12:50 PM, Terry <[email protected]> wrote:
> I am still following through with the sender.  I want to double check
>  the logic on my end.  They are sending v2 traps.  I have also loaded
>  their mib into /usr/share/snmp/mibs. Here is my snmptrapd.conf:
>
>  authCommunity log,execute,net public
>  traphandle default /usr/bin/perl /usr/bin/traptoemail -s localhost -f
>  [email protected] [email protected]
>
>  And here is how I am starting snmptrapd while testing:
>  snmptrapd -f -Le -d  -M /usr/share/snmp/mibs -m ALL
>
>  I have a question somewhat related to this.  Can I accept traps for
>  multiple communities somehow with a single snmptrapd daemon and have a
>  different set of handlers for each?  I just want to double check my
>  work on my end while they are scratching their heads on their end.
>
>
>  On Wed, Mar 26, 2008 at 10:12 AM, Dave Shield
>
> <[email protected]> wrote:
>
>
> > On 26/03/2008, Terry <[email protected]> wrote:
>  >     [snip]
>  >
>  > >
>  >  >  Cannot find TrapOID in TRAP2 PDU
>  >
>  >  Well, it's quite correct.
>  >
>  >  The first two varbinds of a Trap2-PDU are meant to
>  >  be 'sysUptime.0' followed by 'snmpTrapOID.0'
>  >  The first two varbinds in this dump are
>  >  'enterprises.22096.1.1.1' and 'enterprises.22096.1.1.4'
>  >     (assuming I've done the calculations correctly)
>  >
>  >  That's the enterprise number for Image Project Inc.
>  >
>  >
>  >  It looks as if the generating application is broken.
>  >  I suggest you get onto the supplier and ask them
>  >  about this.
>  >
>  >  Dave
>  >
>

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users