FW: SNMPv3 Help - Problems with user accounts. Trying to snmpwalk

I have opted to go for Ubuntu in order to try to get this working.
 
I am at the same stage as before though, i can snmpwalk the firewall using version 1 but with version 3 i still get -
"snmpwalk: No securityName specified"
 
This is dispite me following the snmpconf command line tutorial and going through the "http://net-snmp.sourceforge.net/docs/README.snmpv3.html" readme.
 
Something has gone wrong somewhere.
 
My snmpd.conf file within /usr/local/share/snmp contains the following: (Spam warning)
 
###########################################################################
#
# snmpd.conf
#
#   - created by the snmpconf configuration program
#
##########################################################################
# SECTION: Access Control Setup
#
#   This section defines who is allowed to talk to your running
#   snmp agent.
 
# rwuser: a SNMPv3 read-write user
#   arguments:  user [noauth|auth|priv] [restriction_oid]
 
rwuser  fred auth 
 
# rouser: a SNMPv3 read-only user
#   arguments:  user [noauth|auth|priv] [restriction_oid]
 
rouser  sally auth 
 
# rocommunity: a SNMPv1/SNMPv2c read-only access community name
#   arguments:  community [default|hostname|network/bits] [oid]
 
rocommunity  public  
 
# rwcommunity: a SNMPv1/SNMPv2c read-write access community name
#   arguments:  community [default|hostname|network/bits] [oid]
 
rwcommunity  private 127.0.0.1 
 
 
 
###########################################################################
# SECTION: System Information Setup
#
#   This section defines some of the information reported in
#   the "system" mib group in the mibII tree.
 
# syslocation: The [typically physical] location of the system.
#   Note that setting this value here means that when trying to
#   perform an snmp SET operation to the sysLocation.0 variable will make
#   the agent return the "notWritable" error code.  IE, including
#   this token in the snmpd.conf file will disable write access to
#   the variable.
#   arguments:  location_string
 
syslocation  home
 
# syscontact: The contact information for the administrator
#   Note that setting this value here means that when trying to
#   perform an snmp SET operation to the sysContact.0 variable will make
#   the agent return the "notWritable" error code.  IE, including
#   this token in the snmpd.conf file will disable write access to
#   the variable.
#   arguments:  contact_string
 
syscontact  1337
 
 
 
###########################################################################
# SECTION: Trap Destinations
#
#   Here we define who the agent will send traps to.
 
# informsink: A SNMPv2c inform (acknowledged trap) receiver
#   arguments: host [community] [portnum]
 
informsink  PIX  
 
# trapcommunity: Default trap sink community to use
#   arguments: community-string
 
trapcommunity  .1.3.6.1.4.1.8072
 
# authtrapenable: Should we send traps when authentication failures occur
#   arguments: 1 | 2   (1 = yes, 2 = no)
 
authtrapenable  1
###########################################################################
 
Any help on this problem is appreciated - Was up all night trying to send an SNMPv3 packet.
 
Thanks in advance.
 
Daniel
 
________________________________
0000
> 
> *First time user question*
> 
> I currently have net-snmp-5.4.1-3.win32.exe installed and i am trying to send an SNMP version 3 packet to a firewall for test purposes - by using the snmpwalk command.
> 
> snmpwalk version 1 walks work fine - (snmpwalk -c public -v 1 192.168.3.1) and it returns an array of data.
> 
> However I am trying to use snmpv3 - when i do "snmpwalk -c public -v 3 192.168.3.1" It returns "snmpwalk: No securityName specified".
> 
> I tried putting;
> 
> createUser netadmin MD5 "netadminpassword" DES
> rouser netadmin
> 
> 
> Into the snmp.conf file (C:/usr/etc/snmp/snmp.conf file) but the command line just returns "Unknown Token: CreateUser, Unknown Token:rouser ". I have no snmpd.conf file that i can find and following the initial user setup tutorials i cant seem to begin to get this working.
> 
> 
> 
> 
> ________________________________

_________________________________________________________________
Win 100’s of Virgin Experience days with BigSnapSearch.com
http://www.bigsnapsearch.com

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users