RE: End of MIB

 

1) > But its working fine with remote host.

       $ snmpwalk -v 1 -c public <remote ip> versiontag

         Output:  UCD-SNMP-MIB::versionTag.0 = STRING: 5.0.9

 

       $ snmpwalk -v 1 -c public <remote ip> system

        Output:

SNMPv2-MIB::sysDescr.0 = STRING: SunOS BILL2 5.10 Generic_118833-33
sun4u

SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.3

DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (2121314354) 245 days,
12:32:23
.54

SNMPv2-MIB::sysContact.0 = STRING: "System administrator"

SNMPv2-MIB::sysName.0 = STRING: BILL2

SNMPv2-MIB::sysLocation.0 = STRING: "System administrators office"

SNMPv2-MIB::sysServices.0 = INTEGER: 72

SNMPv2-MIB::sysORLastChange.0 = Timeticks: (25) 0:00:00.25

SNMPv2-MIB::sysORID.1 = OID: IF-MIB::ifMIB

SNMPv2-MIB::sysORID.2 = OID: SNMPv2-MIB::snmpMIB

SNMPv2-MIB::sysORID.3 = OID: TCP-MIB::tcpMIB

SNMPv2-MIB::sysORID.4 = OID: IP-MIB::ip

SNMPv2-MIB::sysORID.5 = OID: UDP-MIB::udpMIB

SNMPv2-MIB::sysORID.6 = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup

SNMPv2-MIB::sysORID.7 = OID:
SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance

SNMPv2-MIB::sysORID.8 = OID: SNMP-MPD-MIB::snmpMPDCompliance

SNMPv2-MIB::sysORID.9 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance

SNMPv2-MIB::sysORDescr.1 = STRING: The MIB module to describe generic
objects fo
r network interface sub-layers

SNMPv2-MIB::sysORDescr.2 = STRING: The MIB module for SNMPv2 entities

SNMPv2-MIB::sysORDescr.3 = STRING: The MIB module for managing TCP
implementatio
ns

SNMPv2-MIB::sysORDescr.4 = STRING: The MIB module for managing IP and
ICMP imple
mentations

SNMPv2-MIB::sysORDescr.5 = STRING: The MIB module for managing UDP
implementatio
ns

SNMPv2-MIB::sysORDescr.6 = STRING: View-based Access Control Model for
SNMP.

SNMPv2-MIB::sysORDescr.7 = STRING: The SNMP Management Architecture MIB.

SNMPv2-MIB::sysORDescr.8 = STRING: The MIB for Message Processing and
Dispatchin
g.

SNMPv2-MIB::sysORDescr.9 = STRING: The management information
definitions for th
e SNMP User-based Security Model.

SNMPv2-MIB::sysORUpTime.1 = Timeticks: (22) 0:00:00.22

SNMPv2-MIB::sysORUpTime.2 = Timeticks: (22) 0:00:00.22

SNMPv2-MIB::sysORUpTime.3 = Timeticks: (22) 0:00:00.22

SNMPv2-MIB::sysORUpTime.4 = Timeticks: (22) 0:00:00.22

SNMPv2-MIB::sysORUpTime.5 = Timeticks: (22) 0:00:00.22

SNMPv2-MIB::sysORUpTime.6 = Timeticks: (22) 0:00:00.22

SNMPv2-MIB::sysORUpTime.7 = Timeticks: (24) 0:00:00.24

SNMPv2-MIB::sysORUpTime.8 = Timeticks: (24) 0:00:00.24

SNMPv2-MIB::sysORUpTime.9 = Timeticks: (25) 0:00:00.25

 

     > 3)$snmpwalk -v 1 -c public localhost versiontag

         > End of MIB

 

 

 

2) $ cat /etc/snmp/snmpd.conf

 

# Other ideas:

#

# exec .1.3.6.1.4.1.2021.51 ps /bin/ps

# exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top

# exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq

 

#
------------------------------------------------------------------------
-----

 

 

########################################################################
#######

# Pass through control.

#

 

# Usage:

#   pass MIBOID EXEC-COMMAND

#

# This will pass total control of the mib underneath the MIBOID

# portion of the mib to the EXEC-COMMAND.

#

# Note:  You'll have to change the path of the passtest script to your

# source directory or install it in the given location.

#

# Example:  (see the script for details)

#           (commented out here since it requires that you place the

#           script in the right location. (its not installed by
default))

 

# pass .1.3.6.1.4.1.2021.255 /bin/sh /usr/local/local/passtest

 

# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.255

# enterprises.ucdavis.255.1 = "life the universe and everything"

# enterprises.ucdavis.255.2.1 = 42

# enterprises.ucdavis.255.2.2 = OID: 42.42.42

# enterprises.ucdavis.255.3 = Timeticks: (363136200) 42 days, 0:42:42

# enterprises.ucdavis.255.4 = IpAddress: 127.0.0.1

# enterprises.ucdavis.255.5 = 42

# enterprises.ucdavis.255.6 = Gauge: 42

#

# % snmpget -v 1 localhost public .1.3.6.1.4.1.2021.255.5

# enterprises.ucdavis.255.5 = 42

#

# % snmpset -v 1 localhost public .1.3.6.1.4.1.2021.255.1 s "New string"

# enterprises.ucdavis.255.1 = "New string"

#

 

# For specific usage information, see the man/snmpd.conf.5 manual page

# as well as the local/passtest script used in the above example.

 

# Added for support of bcm5820 cards.

pass .1.3.6.1.4.1.4413.4.1 /usr/bin/ucd5820stat

 

########################################################################
#######

# Further Information

#

#  See the snmpd.conf manual page, and the output of "snmpd -H".

 

rocommunity public

 

 

 

 

 

 

 

Thanks & Regards,

ElayaRaja 

_________________________________________________________________

 

-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Dave Shield
Sent: Tuesday, April 29, 2008 6:48 PM
To: Sathasivam, Elayaraja
Cc: [email protected]
Subject: Re: End of MIB

 

2008/4/29 Sathasivam, Elayaraja <[email protected]>:

 

> 1) $snmpget -v 1 -c public localhost   sysUpTime.0

> DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (21168) 0:03:31.68

> 

> 3)$snmpwalk -v 1 -c public localhost versiontag

> End of MIB

 

What is in the file /etc/snmp/snmpd.conf ?

 

 

> But its working fine with remote host.

 

What do you mean by that?

Are you querying *from* the remote host to the system above?

Or are you querying from this system *to* the remote host?

 

Dave

-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference 
Don't miss this year's exciting event. There's still time to save $100. 
Use priority code J8TL2D2. 
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users