RE: End of MIB

1) $snmpgetnext -v 1 -c public localhost .1.3
Outpu: Timeout: No Response from localhost.

Need to install separate rpm UCD MIB (net-snmp-5.3.1-14) which is not
available from the following package,

net-snmp-5.3.1-14.el5.x86_64.rpm
net-snmp-libs-5.3.1-14.el5.x86_64.rpm
net-snmp-utils-5.3.1-14.el5.x86_64.rpm


Thanks & Regards,
ElayaRaja 
_________________________________________________________________

-----Original Message-----
From: Mike Ayers [mailto:[email protected]] 
Sent: Wednesday, April 30, 2008 10:06 AM
To: Sathasivam, Elayaraja; [email protected]
Subject: RE: End of MIB

> From: [email protected] 
> [mailto:[email protected]] On 
> Behalf Of Sathasivam, Elayaraja
> Sent: Tuesday, April 29, 2008 9:18 PM

> 1) > But its working fine with remote host.
> 
>        $ snmpwalk -v 1 -c public <remote ip> versiontag
> 
>          Output:  UCD-SNMP-MIB::versionTag.0 = STRING: 5.0.9

>      > 3)$snmpwalk -v 1 -c public localhost versiontag
> 
>          > End of MIB

	Try:

$snmpgetnext -v 1 -c public localhost .1.3

	If that does not return "End of MIB", the implication is that
you do not have the UCD MIB compiled into that agent.


	HTH,

Mike

-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference 
Don't miss this year's exciting event. There's still time to save $100. 
Use priority code J8TL2D2. 
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users