RE: installing and using net-snmp

I went through the basic setup with snmpconf process outlined at
http://www.net-snmp.org/tutorial/tutorial-5/demon/snmpd.html.

I then invoked snmpd from the command line. I ran prtg from a windows
box on the same subnet as the FReeBSD7 box running net-snmp with
autodiscovery and the IP address of the FreeBSD7 box running net-snmp
and was able to create a sensor and track the throughput on the
interfaces of the FreeBSD7 box. I verified the throughputs with a probe
on the same segment and they match. I will also check the probe to look
at the various SNMP traffic that is occurring.

Everything appears to be working. 

Thanks,

John

-----Original Message-----
From: Thomas Anders [mailto:[email protected]] 
Sent: Wednesday, August 20, 2008 7:07 PM
To: Karr,JE,John,JGU8 R
Cc: [email protected]
Subject: Re: installing and using net-snmp

[email protected] wrote:
> I have installed 5.4.2.rc2 and attached the make test and make install
> capture. It indicated 58 / 59 succeeded.I subsequently ran snmpconf
with
> no problem and plan on testing with prtg in the morning.

The attachment didn't come through. Which test failed?


+Thomas

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users