Re: Help connecting to agent

   Hello Mike,
   thanks for your quick answer. This is my snmpd.conf (placed in
/usr/local/share/snmp/):

###########################################################################
#
# snmpd.conf
#
#   - created by the snmpconf configuration program
#
###########################################################################
# SECTION: System Information Setup
#
#   This section defines some of the information reported in
#   the "system" mib group in the mibII tree.

# syslocation: The [typically physical] location of the system.
#   Note that setting this value here means that when trying to
#   perform an snmp SET operation to the sysLocation.0 variable will make
#   the agent return the "notWritable" error code.  IE, including
#   this token in the snmpd.conf file will disable write access to
#   the variable.
#   arguments:  location_string

syslocation  "Test location string"

# syscontact: The contact information for the administrator
#   Note that setting this value here means that when trying to
#   perform an snmp SET operation to the sysContact.0 variable will make
#   the agent return the "notWritable" error code.  IE, including
#   this token in the snmpd.conf file will disable write access to
#   the variable.
#   arguments:  contact_string

syscontact  "Test contact info"

# sysservices: The proper value for the sysServices object.
#   arguments:  sysservices_number

sysservices 0
###########################################################################

   And these are the failing commands (all of them get Timeout: No Response
from localhost)

 snmpget -v1 -c public localhost  system.sysLocation.0
 snmpwalk -v1 localhost -c public system

(I've tried with -v1 and -v2c, and the result is the same).

   Any advice about what to try next? Thank you so much for your help!
   BR

   Raúl


On Tue, Nov 25, 2008 at 6:18 PM, Mike Ayers <[email protected]> wrote:

> > From: Raúl Mellado [mailto:[email protected]]
> > Sent: Tuesday, November 25, 2008 6:41 AM
>
> >     I'm getting the classical 'Timeout: No Response from
> > localhost' whenever I try a snmpwalk, get, etc., either from
> > localhost or from a remote host.
>
>         Please post your snmpd.conf, snmp.conf (if you use one), and the
> failing command (snipped, not retyped, please).
>
>
>        Thanks,
>
> Mike
>

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users