Re: Problem in using Counter64

umashankar tm <[email protected]>
Newsgroups gmane.network.net-snmp.user
Message-ID <[email protected]>
Some more info:

  I am using Net-SNMP 5.3.1. And I get the right value if I print the low and high values within the agent.

ie, in xx_data_access.c if i do printf xxx.low and xxx.high,
o/p: low: 100, high: 1

but snmpget gives following o/p:

# snmpget -v2c -c public localhost xxxx.0
xxxx.0 = Counter64: 1

Any help appriciated.

Thanks,
Umashankar




--- On Mon, 12/1/09, umashankar tm <[email protected]> wrote:
From: umashankar tm <[email protected]>
Subject: Problem in using Counter64
To: [email protected]
Date: Monday, 12 January, 2009, 7:20 PM


Hi,

     In my MIB I have a variable defined as Counter64. when I generate code using mib2c, it is converted to U64. I am assigning xxx.high = 1  and xxx.low=100. 


rowreq_ctx->data.xxx.high = 1;
    
       
rowreq_ctx->data.xxx.low = 100;
 
If I do snmpget I will get the output as 1. ie only xxx.high is displayed. Please let me know am I missing out anything or point me to some relevent on docs.


 Regards,
Umashankar


       Connect with friends all over the world.  Get Yahoo! India Messenger.------------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It is the best place to buy or sell services for
just about anything Open Source.
http://p.sf.net/sfu/Xq1LFB_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users



      Connect with friends all over the world. Get Yahoo! India Messenger at http://in.messenger.yahoo.com/?wm=n/

------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.