Re: cannot create user with SHA & AES with net-snmp-5.4.2.1 on RH7.2 linux
Dave Shield <[email protected]>
| Newsgroups | gmane.network.net-snmp.user |
|---|---|
| Message-ID | <[email protected]> |
2009/1/21 PoWah Wong <[email protected]>: > # cat /var/net-snmp/snmpd.conf > createUser "admin" SHA "12345678" AES "87654321" This creates a user called "admin" > # cat /usr/local/share/snmp/snmpd.conf > rwuser "AES" priv This tells the agent to use a user called "AES" These two lines must agree. > # service snmpd start > Starting snmpd: [ OK ] Try starting the agent manually: snmpd -f -Le That should at least show you any error messages or other output. > No snmp is started though and > log is empty: > # cat /var/log/snmpd.log What about the other logs in /var/log ? What does grep snmp /var/log/messages show, for example? Dave ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users