Re: Traphandle (TraptoEmail) Not working properly (read: Permission denied ???)

Dave,

Opened two shell windows. One running the forked daemon, the other
generating traps.

I don't see anything happening on the forked window when sending
traps. As you can see below the process is running with the flags you
recommended:

# ps -ef | egrep snmp
root     21750 21510  0 10:49 ?        00:00:00 /usr/sbin/snmptrapd -f
-Le -Dsnmptrapd -Cc /etc/snmp/snmptrapd.conf
root     21764     1  0 10:49 ?        00:00:00 /usr/sbin/snmpd -Lf
/var/log/snmpd.log -p /var/run/snmpd.pid -a


On Tue, Jan 27, 2009 at 10:42 AM, Dave Shield
<[email protected]> wrote:
> 2009/1/27 Antonio Guerra <[email protected]>:
>> When I try running that command, the process hangs.
>
> Are you sure it's not simply waiting to receive a trap?
> Those options will run the trap receiver as a normal
> command, rather than forking it off into the background
> (which is the normal operation of a daemon).
>
> Start the trap daemon in one window or shell command.
> Then send the trap in a different window.
> You should see things happening in the trapd window.
>
> Dave
>

------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users