Re: UCD-SNMP-MIB returns Empty
malar vizhi <[email protected]>
| Newsgroups | gmane.network.net-snmp.user |
|---|---|
| Message-ID | <[email protected]> |
Hi Dave,
This is my result If I execute walk on system group
C:\>snmpwalk -v 1 -c public 192.168.1.172 system
RFC1213-MIB::sysDescr.0 = STRING: "Hardware: x86 Family 15 Model 6 Stepping
5 AT/AT COMPATIBLE - Software: Windows 2000 Version 5.0 (Build 2195
Multiprocessor Free)"
RFC1213-MIB::sysObjectID.0 = OID: MSSQLSERVER-MIB::software.1.3.1.2
RFC1213-MIB::sysUpTime.0 = Timeticks: (1889062) 5:14:50.62
RFC1213-MIB::sysContact.0 = ""
RFC1213-MIB::sysName.0 = STRING: "MALAR"
RFC1213-MIB::sysLocation.0 = ""
RFC1213-MIB::sysServices.0 = INTEGER: 76
My sysObjectID is "OID: MSSQLSERVER-MIB::software.1.3.1.2"
Am trying to get details from ucdavis tree for three machines which are
HP-UX, Linux & windows...But these three machines giving same empty result
with ucdavis. So I execute walk on system group on these three.
For HP-UX the result is,
C:\>snmpwalk -v 1 -c public 192.168.1.105 system
RFC1213-MIB::sysDescr.0 = STRING: "HP-UX hpux B.11.23 U 9000/800 537550485"
RFC1213-MIB::sysObjectID.0 = OID: RFC1155-SMI::enterprises.11.2.3.2.3
RFC1213-MIB::sysUpTime.0 = Timeticks: (10039745) 1 day, 3:53:17.45
RFC1213-MIB::sysContact.0 = ""
RFC1213-MIB::sysName.0 = STRING: "hpux"
RFC1213-MIB::sysLocation.0 = ""
RFC1213-MIB::sysServices.0 = INTEGER: 72
RFC1213-MIB::system.8.0 = Timeticks: (0) 0:00:00.00
For Linux,
C:\>snmpwalk -v 1 -c public 192.168.1.203 system
RFC1213-MIB::sysDescr.0 = STRING: "Linux RAMA-IN-NAS 2.4.18-3smp #1 SMP Thu
Apr 18 07:27:31 EDT 2002 i686"
RFC1213-MIB::sysObjectID.0 = OID: RFC1155-SMI::enterprises.2021.250.10
RFC1213-MIB::sysUpTime.0 = Timeticks: (541) 0:00:05.41
RFC1213-MIB::sysContact.0 = STRING: "Root <root@localhost> (configure
/etc/snmp/snmp.local.conf)"
RFC1213-MIB::sysName.0 = STRING: "RAMA-IN-NAS"
RFC1213-MIB::sysLocation.0 = STRING: "Unknown (edit /etc/snmp/snmpd.conf)"
RFC1213-MIB::system.8.0 = Timeticks: (5) 0:00:00.05
RFC1213-MIB::system.9.1.2.1 = OID: RFC1213-MIB::mib-2.31
RFC1213-MIB::system.9.1.2.2 = OID: RFC1155-SMI::internet.6.3.1
RFC1213-MIB::system.9.1.2.3 = OID: RFC1213-MIB::mib-2.49
RFC1213-MIB::system.9.1.2.4 = OID: RFC1213-MIB::ip
RFC1213-MIB::system.9.1.2.5 = OID: RFC1213-MIB::mib-2.50
RFC1213-MIB::system.9.1.2.6 = OID: RFC1155-SMI::internet.6.3.16.2.2.1
RFC1213-MIB::system.9.1.2.7 = OID: RFC1155-SMI::internet.6.3.10.3.1.1
RFC1213-MIB::system.9.1.2.8 = OID: RFC1155-SMI::internet.6.3.11.3.1.1
RFC1213-MIB::system.9.1.2.9 = OID: RFC1155-SMI::internet.6.3.15.2.1.1
RFC1213-MIB::system.9.1.3.1 = STRING: "The MIB module to describe generic
objects for network interface sub-layers"
RFC1213-MIB::system.9.1.3.2 = STRING: "The MIB module for SNMPv2 entities"
RFC1213-MIB::system.9.1.3.3 = STRING: "The MIB module for managing TCP
implementations"
RFC1213-MIB::system.9.1.3.4 = STRING: "The MIB module for managing IP and
ICMP implementations"
RFC1213-MIB::system.9.1.3.5 = STRING: "The MIB module for managing UDP
implementations"
RFC1213-MIB::system.9.1.3.6 = STRING: "View-based Access Control Model for
SNMP."
RFC1213-MIB::system.9.1.3.7 = STRING: "The SNMP Management Architecture
MIB."
RFC1213-MIB::system.9.1.3.8 = STRING: "The MIB for Message Processing and
Dispatching."
RFC1213-MIB::system.9.1.3.9 = STRING: "The management information
definitions for the SNMP User-based Security Model."
RFC1213-MIB::system.9.1.4.1 = Timeticks: (3) 0:00:00.03
RFC1213-MIB::system.9.1.4.2 = Timeticks: (3) 0:00:00.03
RFC1213-MIB::system.9.1.4.3 = Timeticks: (3) 0:00:00.03
RFC1213-MIB::system.9.1.4.4 = Timeticks: (3) 0:00:00.03
RFC1213-MIB::system.9.1.4.5 = Timeticks: (3) 0:00:00.03
RFC1213-MIB::system.9.1.4.6 = Timeticks: (3) 0:00:00.03
RFC1213-MIB::system.9.1.4.7 = Timeticks: (5) 0:00:00.05
RFC1213-MIB::system.9.1.4.8 = Timeticks: (5) 0:00:00.05
RFC1213-MIB::system.9.1.4.9 = Timeticks: (5) 0:00:00.05
And Dave...Should I use Snmp-Informant to fetch data from ucdavis?...Untill
now I didnt install Snmp-Informant....in my machine...only net-snmp is
installed...
Thanks & Regards,
Malar
On Wed, Mar 4, 2009 at 4:19 PM, Dave Shield <[email protected]>wrote:
> 2009/3/4 malar vizhi <[email protected]>:
> > C:\>snmpwalk -d -v 1 -c public 192.168.1.172 UCD-SNMP-MIB:ucdavis
> >
> > Sending 40 bytes to UDP: [0.0.0.0]->[192.168.1.172]:161
> > 0000: 30 26 02 01 00 04 06 70 75 62 6C 69 63 A1 19 02
> 0&.....public¡..
> > 0016: 02 21 D9 02 01 00 02 01 00 30 0D 30 0B 06 07 2B
> .!U......0.0...+
> > 0032: 06 01 04 01 8F 65 05 00 .....e..
>
> i.e. GETNEXT .1.3.6.1.4.1.2021
>
> > Received 50 bytes from UDP: [0.0.0.0]->[192.168.1.172]:161
> > 0000: 30 30 02 01 00 04 06 70 75 62 6C 69 63 A2 23 02
> 00.....public¢#.
> > 0016: 02 21 D9 02 01 00 02 01 00 30 17 30 15 06 0F 2B
> .!U......0.0...+
> > 0032: 06 01 04 01 CB 00 01 01 01 01 01 02 43 3A 04 02
> ....E.......C:..
> > 0048: 43 3A C:
>
> i.e. RESPONSE .1.3.6.1.4.1.9600.1.1.1.1.2.67.58
>
> I might have got the enterprise number wrong, but it's
> certainly not within the ucdavis tree.
>
> You can ignore the second pair of packets - that's just snmpwalk
> running a GET request on the same OID, to make sure there's no
> information to be retrieved.
>
>
>
> > Plzz tell me...where exactly the problem..
>
> The remote agent doesn't support anything under the ucdavis tree.
> (Or if it does, then access control is preventing you from seeing it).
>
>
> >192.168.1.172 is a windows 2000 machine...net-snmp 5.4.2 is running...
>
> Are you sure?
> Enterprise no 9600 is assigned to "SNMP Informant"
> (http://www.snmp-informant.com/),
> which would tend to indicate that the remote agent is probably theirs,
> rather
> than the Net-SNMP agent.
>
> Try running snmpwalk on "system".
> What does that report?
> In particular - what value does sysObjectID have?
>
> Dave
>
------------------------------------------------------------------------------
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation and cut costs with open source participation
-Receive a $600 discount off the registration fee with the source code: SFAD
http://p.sf.net/sfu/XcvMzF8H
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users