Re: Error to retrieve the value of Ethernet Object
Dave Shield <[email protected]>
| Newsgroups | gmane.network.net-snmp.user |
|---|---|
| Message-ID | <[email protected]> |
2009/4/13 sanjaykumar <[email protected]>: > snmpwalk -v 2c -c public -n "" localhost .1.3.6.1.2.1.10 > SNMPv2-SMI::transmission = No Such Object available on this agent at this OID The standard agent does not implement anything under the transmission subtree. > but working fine with other mibs like > snmpwalk -v 2c -c public -n "" localhost .1.3.6.1.2.1.3 > RFC1213-MIB::atIfIndex.2.1.172.16.10.1 = INTEGER: 2 That would tend to indicate that the access control settings (Mike's other suggestion) are fine. So it's most likely that the agent does not implement this subtree. > When I did the nm to nm /usr/local/lib/libnetsnmpmibs.a > I am following ".o" file > > dot3StatsTable.o: This is presumably a module which you have coded yourself? In which case, have a look at the FAQ entries http://www.net-snmp.org/wiki/index.php/FAQ:Coding_12 and http://www.net-snmp.org/wiki/index.php/FAQ:Coding_13 Dave ------------------------------------------------------------------------------ This SF.net email is sponsored by: High Quality Requirements in a Collaborative Environment. Download a free trial of Rational Requirements Composer Now! http://p.sf.net/sfu/www-ibm-com _______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users