RE: SNMP V1 traps
Richard Gipps <[email protected]>
| Newsgroups | gmane.network.net-snmp.user |
|---|---|
| Message-ID | <[email protected]> |
Hi Dave, Thanks for the response. I have been experimenting with the monitor function (specifying an event) and I have found some behavior which I can not explain. When I use the following line in the snmpd.conf file: notificationEvent SupplyVoltage 1.3.6.1.4.1.33302.10.6.1 -n I get the following error in the in the snmpd.log file when snmpd is started: /usr/local/share/snmp/snmpd.conf: line 69: Error: unrecognised option If I remove the '-n', the error goes away, but the documentation in the web site below states that the -n is required? http://www.net-snmp.org/docs/man/snmpd.conf.html Regards, Richard -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Dave Shield Sent: Friday, 8 May 2009 8:47 PM To: Richard Gipps Cc: [email protected] Subject: Re: SNMP V1 traps 2009/5/8 Richard Gipps <[email protected]>: > The neat > monitor facility in snmpd works great for V2c but does not seem appropriate > for V1 as it relies on types (macros) defined in SMI-V2 such as > NOTIFICATION-TYPE to generate the correct information for the trap. Please read the FAQ entry Can I use SNMPv1 requests with an SNMPv2 MIB (or vice versa)? (http://net-snmp.sourceforge.net/wiki/index.php/FAQ:General_15) > Is there > another mechanism for timing the generating V1 traps No - just use "monitor" as before. Dave ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users