More Descriptive Logging or Busted MIB - snmptrapd

I'm getting traps sent to my snmptrapd server.  Can the logs be more
verbose such as showing "Power Failed..." as defined in the MIB?

I'm not sure if my MIB is broken or this is the normal way that it
should look.  I'd rather see "Power Failed..." than "Enterprise Specific
Trap (4)".



Traps show up as:
2009-06-06 22:43:19 0.1.0.0(via UDP: [192.168.1.201]:2049) TRAP, SNMP
v1, community myUPS
        SNMPv2-SMI::mib-2.33 Enterprise Specific Trap (4) Uptime:
2:32:59.62

2009-06-06 22:43:31 0.1.0.0(via UDP: [192.168.1.201]:2049) TRAP, SNMP
v1, my belkinUPS
        SNMPv2-SMI::mib-2.33 Enterprise Specific Trap (2) Uptime:
2:33:11.36



My mib wich is loaded and works fine for name translations for
"snmptranslate" and "snmpget" shows the traps defined as:
   dupsPowerFail TRAP-TYPE
       ENTERPRISE upsd
       DESCRIPTION
        "WARNING: Power failed! The UPS is operating on battery power."
       ::= 3

   dupsPowerRestored TRAP-TYPE
       ENTERPRISE upsd
       DESCRIPTION
        "INFORMATION: Power restored! The utility power restored."
       ::= 4






------------------------------------------------------------------------------
OpenSolaris 2009.06 is a cutting edge operating system for enterprises 
looking to deploy the next generation of Solaris that includes the latest 
innovations from Sun and the OpenSource community. Download a copy and 
enjoy capabilities such as Networking, Storage and Virtualization. 
Go to: http://p.sf.net/sfu/opensolaris-get
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users