Problems with ignoreDisk

Hi all,

I'm having a small problem

I'm trying to "exclude" some resources from beeing polled

for example here :

[root@spl-bkp-001 ~]# df -hl
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/VG00-LV00
                      2.0G  369M  1.5G  20% /
/dev/mapper/VG00-LV02
                      992M   38M  904M   5% /home
/dev/mapper/VG00-LV06
                      7.8G  1.4G  6.1G  19% /var
..............
...............
*/dev/mapper/VG_SAN_DATA01-VDL_DATA01*
*                      9.0T  9.0T   14G 100% /VDL01*
*/dev/mapper/VG_SAN_TMP-vdltmp*
*                       12T   11T  133G  99% /vdltmp*
[root@spl-bkp-001 ~]

i'm trying to "ignoredisk" those two partitions.

but i don't manage to do it

in my snmpd.conf, i tried so many options, such as :

- declaring "disk /, disk /var, disk /usr, ignoredisk /VDL01, ignoredisk
/vdltmp etc."
- declaring the same, with raw device name (/dev/mapper/VG.. etc.)
- declaring "includealldisks + ignoredisk"
- declaring "disk /VDLtmp 1%" etc.

nothing seems to work

when i 'snmpwalk' to my machine, it's still reporting the data, and errors

in fact, i'm using Zenoss to do sopme monitoring, and Zenoss is reporting me
"high disk usage" for those disks (who are 99%/100% full alltime)

i'd like to remove this warning, "from the snmpd.conf config" if possible.

any help ?

thanks in advance,

regards,

Olivier

------------------------------------------------------------------------------

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users