Re: DisMan & monitor

2009/11/8 rangeli nepal <[email protected]>:
> So i put a command in snmpd.conf like this:
>
> extend .1.3.6.1.4.1.3658.50 dhcpd_partner_down /root/dhcpd_partner_down.sh
> It worked for me. I can see
>
> snmpwalk localhost -c public -v 2c .1.3.6.1.4.1.3658.50
>
> SNMPv2-SMI::enterprises.3658.50.1.0 = INTEGER: 1
> SNMPv2-SMI::enterprises.3658.50.2.1.2.18.100.104.99.112.100.95.112.97.114.116.110.101.114.95.100.111.119.110
> = STRING: "/root/dhcpd_partner_down.sh"
> SNMPv2-SMI::enterprises.3658.50.2.1.3.18.100.104.99.112.100.95.112.97.114.116.110.101.114.95.100.111.119.110
> = ""

Try using "extend  dhcpd_partner_down /root/dhcpd_partner_down.sh" instead,
and then run

   snmpwalk -v 2c -c public  localhost nsExtendObjects

That will give you essentially the same output, but with a proper
MIB file to display it in a sensible fashion.   (In particular, to interpret
the index to the table properly).   You should then be able to see
where this long OID is coming from.

> Is it ok to see this kind of output?

Yes.



> now I put following lines setup a monitor for this oid.
>
> trapcommunity traprus
> trapsink localhost 162
> trap2sink localhost 162
> informsink localhost 162

Why do you want three copies of every trap?
Typically, you should use "trapsink" OR "trap2sink" OR "informsink".
Not all three.



> monitor -r 60 -o .1.3.6.1.4.1.3658.5000   "Partner Down"
> SNMPv2-SMI::enterprises.3658.50.3.1.4.18.100.104.99.112.100.95.112.97.114.116.110.101.114.95.100.111.119.110
> != 0

Try using
    monitor -r 60 -o  .1.3.6.1.4.1.3658.5000  "Partner Down2"
SNMPv2-SMI::enterprises.3658.50.3.1.4 != 0

or, if you're using the version of extend without an explicit root OID, try
    monitor -r 60 -o  .1.3.6.1.4.1.3658.5000  "Partner Down2"
nsExtendResult  != 0


> However this never generates any trap. I was wondering if I am doing
> someting wrong?

What do you see if you run "snmpwalk ... SNMPv2-SMI::enterprises.3658.50.3.1.4 "
(or "snmpwalk .... nsExtendResult", as appropriate)?
What exit value does your dhcpd_partner_down.sh script return?


Dave

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users