Re: problem configuring foundry load balancer using snmpset
Raj Gurung <[email protected]>
| Newsgroups | gmane.network.net-snmp.user |
|---|---|
| Message-ID | <[email protected]> |
Mike, Thanks for your suggestion. I checked that (SnL4RealServer) RowStatus is 2 which I believe is notInService. Correct me if I am wrong? ~# for i in `seq 1 8`;do snmpget -v1 -crwcommunity 10.10.10.253 1.3.6.1.4.1.1991.1.1.4.3.1.1.$i.1; done OID names SNMPv2-SMI::enterprises.1991.1.1.4.3.1.1.1.1 = INTEGER: 1 snL4RealServerIndex SNMPv2-SMI::enterprises.1991.1.1.4.3.1.1.2.1 = STRING: "myservername" snL4RealServerName SNMPv2-SMI::enterprises.1991.1.1.4.3.1.1.3.1 = IpAddress: 10.10.1.1 snL4RealServerIP SNMPv2-SMI::enterprises.1991.1.1.4.3.1.1.4.1 = INTEGER: 1 snL4RealServerAdminStatus SNMPv2-SMI::enterprises.1991.1.1.4.3.1.1.5.1 = INTEGER: 1000000 snL4RealServerMaxConnections SNMPv2-SMI::enterprises.1991.1.1.4.3.1.1.6.1 = INTEGER: 0 snL4RealServerWeight SNMPv2-SMI::enterprises.1991.1.1.4.3.1.1.7.1 = INTEGER: 2 snL4RealServerRowStatus SNMPv2-SMI::enterprises.1991.1.1.4.3.1.1.8.1 = INTEGER: 0 snL4RealServerDeleteState Still no joy! I could not find the logic for row modification in Foundry MIT either. I should be missing something. Any suggestions or RTFMs? Thanks, raj On Dec 8, 2009, at 11:20 AM, Mike Ayers wrote: >> From: Raj Gurung [mailto:[email protected]] >> Sent: Monday, December 07, 2009 11:22 AM > >> But when I try to change the configuration using snmpset command, I am >> getting errors: >> # snmpset -v1 -c rwcommunity >> 10.10.10.253 .1.3.6.1.4.1.1991.1.1.4.3.1.1.2.1 s my-new-server-name >> Error in packet. >> Reason: (genError) A general failure occured >> Failed object: SNMPv2-SMI::enterprises.1991.1.1.4.3.1.1.2.1 > >> snL4RealServerRowStatus OBJECT-TYPE >> SYNTAX L4RowSts >> ACCESS read-write >> STATUS mandatory >> DESCRIPTION >> "To create or delete a real server entry." >> ::= {snL4RealServerEntry 7 } > > You may need to take the row out of service to chante the name. See the description clause of the RowStatus TC in http://www.ietf.org/rfc/rfc2579.txt for the gory details, which point you to the MIB you are using, which should document the extra logic it uses for row modification. Just because a column is writable does not mean it can be changed at any time. > > > HTH, > > Mike > > ------------------------------------------------------------------------------ > Return on Information: > Google Enterprise Search pays you back > Get the facts. > http://p.sf.net/sfu/google-dev2dev > _______________________________________________ > Net-snmp-users mailing list > [email protected] > Please see the following page to unsubscribe or change other options: > https://lists.sourceforge.net/lists/listinfo/net-snmp-users ------------------------------------------------------------------------------ Return on Information: Google Enterprise Search pays you back Get the facts. http://p.sf.net/sfu/google-dev2dev _______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users