Re: COUNTER64 support in SNMPv2 traps
Malathi Panyam <[email protected]>
| Newsgroups | gmane.network.net-snmp.user |
|---|---|
| Message-ID | <[email protected]> |
I figured out the solution. In Net SNMP makefile make sure you set the default SNMP version to 2 and disable the snmp version 1. Only issue that remain unsolved is I still see the warning from the code send_trap: v1 traps can't carry Counter64 varbinds send_trap: failed to convert v2->v1 template PDU But the traps do reach the trap server. Hope this helps. ________________________________ From: Malathi Panyam <[email protected]> To: [email protected] Sent: Sat, March 20, 2010 2:18:40 PM Subject: COUNTER64 support in SNMPv2 traps Hi, Is Counter64 supported for SNMPv2 traps? I am aware that its supported by SNMPv2 and I am able to use them successfully for my other MIBs, but when I tried to use a counter64 bit value with my traps, I see the following messages in my output send_trap: v1 traps can't carry Counter64 varbinds send_trap: failed to convert v2->v1 template PDU I use trap2sink in my snmpd.conf and I used ASN_COUNTE64 as the type in my code. I am using NetSNMP 5.4.2.1 and when I checked the code, when we send a v2 trap, ultimately it converts it into a V1 trap... Pl. help. Thanks in advance, Regards, Malathi ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users