help

Hi,

I have to add a MIB files in the agent. I try to use mib2c to generate a
template for my MIB.

the MIB is private for the CEN/XFS that has the oid : 1.3.6.4.1.16213. I
downlowded it for the site :

http://www.cen.eu/cen/Sectors/Sectors/ISSS/Activity/Pages/xfs_cwas.aspx

when I installer the 'MIB Installer SDK 1.10'. in installing this SDK, it
add the 15 MIB files and their .h files.

this MIBs are organised with this architecture :
http://img413.imageshack.us/img413/3773/mibxfs.jpg

the SDK generate 15 MIB Files:

- xfsGeneral
- xfsalm
-xfsApplication
- xfscam
- xfscdm
- xfsceu
- xfsceu
- xfscim
- xfsdep
- xfsidc
- xfspin
- xfsptr
- xfssiu
- xfsttu
- xfsvdm

as it clear, the xfsGeneral is in the head of my MIB. but this file has this
head declaration :






XFSMIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises, Integer32, OBJECT-TYPE, OBJECT-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC;
-- ********************************************************************
-- General #defines
-- ********************************************************************
IxfsMIBDeviceStatus ::= INTEGER
{
xfsDevOnline(1),
xfsDevOffline(2),
xfsDevPowerOff(3),
xfsDevNoDevice(4),
xfsDevHWError(5),
xfsDevUserError(6),
xfsDevBusy(7)
}
xfsMIBRoot OBJECT IDENTIFIER ::= { enterprises 16213 }
xfsGeneral OBJECT IDENTIFIER ::= { xfsMIBRoot 1 }
--
********************************************************************************
--
-- The XFS (1.3.6.1.4.1.16213)
-- General Group (1.3.6.1.4.1.16213.1)
--
-- Implementation of the general group is mandatory for all agents
-- supporting the XFS MIB.
--
-- 
********************************************************************************
xfsMIBV1 OBJECT IDENTIFIER ::= { xfsGeneral 1 }
xfsMIBRelease OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The XFS MIB release supported by the agent."
::= { xfsMIBV1 1 }
xfsXFSRelease OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The XFS documentation release that the MIB corresponds to."
::= { xfsMIBV1 2 }
xfsJXFSRelease OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The J/XFS documentation release that the MIB corresponds to."
::= { xfsMIBV1 3 }


.......






I followed the tutorial in the web site when i add the MIB files to
/usr/share/snmp/mibs then i use the command

MIB=ALL

but snmptranslate can't see my MIBs and mib2c too when i try the commande :

mib2c -c mib2c.int_watch.conf XFSMIB
or
mib2c -c mib2c.int_watch.conf xfsGeneral

what is the problem here ? Please help me


Note: I used ubuntu 9.10
-- 
Jihed LAZID
-------------------------------------
Elève ingénieur à l'Ecole Supérieure des Communications de Tunis (SUPCOM)
-------------------------------------
Tel : +216 21 789 187

http://jihed.lazid.netcv.com/

------------------------------------------------------------------------------

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users