Re: Net-SNMP Trap Agent start error

Yeah thanks that was the problem!
so for others, who might have the same problem:

go to the commandline and do the following things

net stop "MG-SOFT SNMP Trap Service"
than you should get a conformation that the agent has successfully stopped

net start "NET-SNMP Trap Handler"

thats it

THX again Bart

Greetings MAX

Also a little reminder: If you using snmpget to receive information of a remote windowsxp host, it is possible that the OfficeScan NT Firewall of this host is blocking the requests. So just disable it in the time when you are testing...


-------- Original-Nachricht --------
> Datum: Wed, 14 Jul 2010 12:12:39 +0200
> Von: Bart Van Assche <[email protected]>
> An: Markus Hofer <[email protected]>
> CC: [email protected]
> Betreff: Re: Net-SNMP Trap Agent start error

>  On Tue, Jul 13, 2010 at 12:23 PM, Markus Hofer <[email protected]>
> wrote:
> 
> > I got a problem with starting the Net-SNMP Trap Agent under windows xp
> > I use the Net-SNMP version 5.4.2.1
> >
> > I have the following configurations in C:\usr\etc\snmp\snmptrapd.conf
> >
> > createUser -e 0x8000000001020304  snmpv3_MD5_trap_log_w MD5 "helloworld"
> > authUser log  snmpv3_MD5_trap_log
> >
> > createUser -e 0x8000000001020304  snmpv3_SHA_trap_log_w SHA "helloworld"
> > authUser log  snmpv3_SHA_trap_log
> >
> > after registering snmptrapd as admin with the command
> >
> > snmptrapd -register -Lf C:\testsnmptrapd.log
> >
> > i try to start the NET-SNMP Handler by
> >
> > net start "Net-SNMP Trap Handler"
> >
> > which terminates with:
> >
> > System error 1067 has occured.
> >
> > The log file states:
> >
> > NET-SNMP version 5.4.2.1
> > couldn't open udp:162 -- errno 2 ("No such file or directory")
> >
> > and
> >
> > netstat -a -f | find "162"
> > it gives me back
> >
> > TCP <ipaddress1>:1625 <ipaddress2> 22 ESTABLISHED
> > UPD 0.0.0.0:162 *.*
> >
> > What am I doing wrong?
> >
> > Greetings MAX
> >
> > BTW: The "Net-SNMP Agent" is started as well
> >
> 
> The above output means that another process is listening on UDP port 162.
> That is why the Net-SNMP trap service can't start. Was the Microsoft *SNMP
> Trap Service* still running ?
> 
> Note: you can find out the process ID of the process that is listening on
> port 162 by running the following command:
> 
> netstat -ano | find ":162 "
> 
> Bart.

-- 
Sicherer, schneller und einfacher. Die aktuellen Internet-Browser -
jetzt kostenlos herunterladen! http://portal.gmx.net/de/go/atbrowser

------------------------------------------------------------------------------
This SF.net email is sponsored by Sprint
What will you do first with EVO, the first 4G phone?
Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users