Re: SNMP walk not displaying complete mib oid\'s

On 16 July 2010 11:01,  <[email protected]> wrote:
> I have 2 embedded target machines.. both uses different versions of
> snmp's( 5.1.2 and 5.3.2.2)
>
> while doing snmpwalk, these machines return diff results...
>
> target1(5.3.2.2)
> SNMPv2-MIB::sysORID.1 = OID: SNMPv2-MIB::snmpMIB
> SNMPv2-MIB::sysORID.2 = OID: TCP-MIB::tcpMIB
> SNMPv2-MIB::sysORID.3 = OID: IP-MIB::ip
> SNMPv2-MIB::sysORID.4 = OID: UDP-MIB::udpMIB
> SNMPv2-MIB::sysORID.5 = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup
> SNMPv2-MIB::sysORID.6 = OID: IF-MIB::ifMIB
>
> target2(5.1.2)
> SNMPv2-MIB::sysORID.1 = OID: IF-MIB::ifMIB
> SNMPv2-MIB::sysORID.2 = OID: SNMPv2-MIB::snmpMIB
> SNMPv2-MIB::sysORID.3 = OID: TCP-MIB::tcpMIB
> SNMPv2-MIB::sysORID.4 = OID: IP-MIB::ip
> SNMPv2-MIB::sysORID.5 = OID: UDP-MIB::udpMIB
> SNMPv2-MIB::sysORID.6 = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup
> SNMPv2-MIB::sysORID.7 = OID:
> SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance
> SNMPv2-MIB::sysORID.8 = OID: SNMP-MPD-MIB::snmpMPDCompliance
> SNMPv2-MIB::sysORID.9 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance
>
>        I'm not able to individually walk through those missing mibs
> with its mibs...

Please see the FAQ entry
       I can see the system group, but nothing else.  Why?


Dave

------------------------------------------------------------------------------
This SF.net email is sponsored by Sprint
What will you do first with EVO, the first 4G phone?
Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users