mfd - problems with container_load

Hi,

I'm currently creating a test agent using my own mib.  I have 
implemented all the scalar values using mib2c and then int-watch 
configuration file.  The problem I have is with a table.  mib2c.mfd.conf 
was used to create the files.  I have implemented the data access 
routines but I can't see where the generated routine 
(loadMonitorUnitsPOTable_container_load) is called, i've used gdb and 
set a breakpoint but the routine doesn't get called and I'm seeing no 
table information when using snmpwalk or snmpbulkget.  All the examples 
I've seen use container-cache which call the xx_container_load from a 
_cache_load hook routine that is passed to the netsnmp_cache_create 
function.  I choose the default container option:

container : [DEFAULT]  This access method uses a netsnmp_container
      to store all row data in memory. This method is best for:
          - Internal data (maintained by the agent)
          - Access speed is important
          - Sufficient memory exists to contain all rows

Does anyone know how to hook the container_load routine up, or know why 
I'm not getting any table information?  I've tried add the 
container_load to loadMonitorUnitsPOTable_container_init but it seg faults.

Just in case it helps here is the portion of the MIB that defines the table:
loadMonitorUnitsPOIndex  OBJECT-TYPE
     SYNTAX     Integer32 (0..13)
     MAX-ACCESS accessible-for-notify
     STATUS     current
     DESCRIPTION
         ""
     ::= { loadMonitorPOUnits 2 }

loadMonitorUnitsPOTable  OBJECT-TYPE
     SYNTAX SEQUENCE OF LoadMonitorUnitsPOEntry
     MAX-ACCESS not-accessible
     STATUS     current
     DESCRIPTION
         ""
     ::= { loadMonitorPOUnits 3 }

loadMonitorUnitsPOEntry  OBJECT-TYPE
     SYNTAX  LoadMonitorUnitsPOEntry
     MAX-ACCESS not-accessible
     STATUS     current
     DESCRIPTION
         ""
     INDEX { loadMonitorUnitsPOIndex }
     ::= { loadMonitorUnitsPOTable 1 }

LoadMonitorUnitsPOEntry ::= SEQUENCE {
     loadMonitorIDPO
         Integer32,
     loadMonitorFuseStatus1PO
         INTEGER,
     loadMonitorCurrent1PO
         Integer32,
     loadMonitorFuseStatus2PO
         INTEGER,
     loadMonitorCurrent2PO
         Integer32
}

loadMonitorIDPO  OBJECT-TYPE
     SYNTAX     Integer32
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         ""
     ::= { loadMonitorUnitsPOEntry 1 }

loadMonitorFuseStatus1PO  OBJECT-TYPE
     SYNTAX     INTEGER {
         normal (0),
         alarm (1)
     }
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The state of the load fuses/breakers can be either normal(0) 
or alarm(1) "
     ::= { loadMonitorUnitsPOEntry 2 }

loadMonitorCurrent1PO  OBJECT-TYPE
     SYNTAX     Integer32
     UNITS   "Amperes or DeciAmperes"
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The current consumed by this load branch. Note that the units 
measured may be i Amperes or in Deciamperes depending on global system 
settings"
     ::= { loadMonitorUnitsPOEntry 3 }

loadMonitorFuseStatus2PO  OBJECT-TYPE
     SYNTAX     INTEGER {
         normal (0),
         alarm (1)
     }
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The state of the load fuses/breakers can be either normal(0) 
or alarm(1) "
     ::= { loadMonitorUnitsPOEntry 4 }

loadMonitorCurrent2PO  OBJECT-TYPE
     SYNTAX     Integer32
     UNITS   "Amperes or DeciAmperes"
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The current consumed by this load branch. Note that the units 
measured may be i Amperes or in Deciamperes depending on global system 
settings"
     ::= { loadMonitorUnitsPOEntry 5 }

Many Thanks in advance,
Martin.

------------------------------------------------------------------------------
This SF.net email is sponsored by Sprint
What will you do first with EVO, the first 4G phone?
Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users