Re: add trap dest via snmpNotifyTable & snmpTargetAddrTable

Hi Claus Klein,

Thanks for the suggestion .. modifying DisplayString to Hex worked, the trap
destination got added successfully.

Thanks & Regards...

On Wed, Sep 1, 2010 at 10:51 AM, Claus Klein <[email protected]>wrote:

> I think the address encoding is wrong!
> This is a valid configuration:
>
> claus-kleins-macbook-pro:~ clausklein$ snmpwalk localhost snmpnotifytable
> SNMP-NOTIFICATION-MIB::snmpNotifyTag.'internal0' = STRING: internal0
> SNMP-NOTIFICATION-MIB::snmpNotifyType.'internal0' = INTEGER: trap(1)
> SNMP-NOTIFICATION-MIB::snmpNotifyStorageType.'internal0' = INTEGER:
> readOnly(5)
> SNMP-NOTIFICATION-MIB::snmpNotifyRowStatus.'internal0' = INTEGER: active(1)
>
> claus-kleins-macbook-pro:~ clausklein$ snmpwalk localhost targetparamstable
> SNMP-TARGET-MIB::snmpTargetParamsMPModel.'internal0' = INTEGER: 1
> SNMP-TARGET-MIB::snmpTargetParamsSecurityModel.'internal0' = INTEGER: 2
> SNMP-TARGET-MIB::snmpTargetParamsSecurityName.'internal0' = STRING: public
> SNMP-TARGET-MIB::snmpTargetParamsSecurityLevel.'internal0' = INTEGER:
> noAuthNoPriv(1)
> SNMP-TARGET-MIB::snmpTargetParamsStorageType.'internal0' = INTEGER:
> readOnly(5)
> SNMP-TARGET-MIB::snmpTargetParamsRowStatus.'internal0' = INTEGER: active(1)
>
> claus-kleins-macbook-pro:~ clausklein$ snmpwalk localhost targetaddrtable
> SNMP-TARGET-MIB::snmpTargetAddrTDomain.'internal0' = OID:
> SNMPv2-TM::snmpUDPDomain
> SNMP-TARGET-MIB::snmpTargetAddrTAddress.'internal0' = Hex-STRING: 7F 00 00
> 01 00 A2  <<<<<<<<<<<
> SNMP-TARGET-MIB::snmpTargetAddrTimeout.'internal0' = INTEGER: 1000
> SNMP-TARGET-MIB::snmpTargetAddrRetryCount.'internal0' = INTEGER: 5
> SNMP-TARGET-MIB::snmpTargetAddrTagList.'internal0' = STRING: internal0
> SNMP-TARGET-MIB::snmpTargetAddrParams.'internal0' = STRING: internal0
> SNMP-TARGET-MIB::snmpTargetAddrStorageType.'internal0' = INTEGER:
> readOnly(5)
> SNMP-TARGET-MIB::snmpTargetAddrRowStatus.'internal0' = INTEGER: active(1)
> claus-kleins-macbook-pro:~ clausklein$
>
> I hope this helps
> Claus
>
> On 31.08.2010, at 12:28, rakesh zingade wrote:
>
>
> Hi all,
>
> I am trying to add trap destination using combination of snmpNotifyTable
> and snmpTargetAddrTable entities. But the agent seems not entertaining the
> config that I did. Can you please suggest whats wrong I did and is there
> something extra needed for adding trap dest?
>
> I am executing following script to set snmpNotifyTable, snmpTargetAddrTable
> and snmpTargetParamsTable. I refered http://www.ietf.org/rfc/rfc2573.txt
>
> script:
>
> #!/bin/bash
>>
>> TargetAddrName=addr1;
>> DEST="127.0.0.1:162"
>>
>> snmpset -m all -v2c -c private 127.0.0.1
>> SNMP-NOTIFICATION-MIB::snmpNotifyRowStatus.\'$TargetAddrName\' i 5
>> 2>/dev/null
>> snmpset -m all -v2c -c private 127.0.0.1
>> SNMP-NOTIFICATION-MIB::snmpNotifyTag.\'$TargetAddrName\' s "$TargetAddrName"
>> 2>/dev
>> /null
>> snmpset -m all -v2c -c private 127.0.0.1
>> SNMP-TARGET-MIB::snmpTargetAddrRowStatus.\'$TargetAddrName\' i 5 2>/dev/null
>> snmpset -m all -v2c -c private 127.0.0.1
>> SNMP-TARGET-MIB::snmpTargetAddrTDomain.\'$TargetAddrName\' o
>> ".1.3.6.1.6.1.1" 2>/de
>> v/null
>> snmpset -m all -v2c -c private 127.0.0.1
>> SNMP-TARGET-MIB::snmpTargetAddrTAddress.\'$TargetAddrName\' s "$DEST"
>> 2>/dev/null
>> snmpset -m all -v2c -c private 127.0.0.1
>> SNMP-NOTIFICATION-MIB::snmpNotifyRowStatus.\'$TargetAddrName\' i 1
>> 2>/dev/null
>> snmpset -m all -v2c -c private 127.0.0.1
>> SNMP-NOTIFICATION-MIB::snmpNotifyStorageType.\'$TargetAddrName\' i 1
>> 2>/dev/null
>> snmpset -m all -v2c -c private 127.0.0.1
>> SNMP-TARGET-MIB::snmpTargetAddrParams.\'$TargetAddrName\' s
>> "$TargetAddrName" 2>/de
>> v/null
>> snmpset -m all -v2c -c private 127.0.0.1
>> SNMP-TARGET-MIB::snmpTargetAddrRowStatus.\'$TargetAddrName\' i 1 2>/dev/null
>> snmpset -m all -v2c -c private 127.0.0.1
>> SNMP-TARGET-MIB::snmpTargetAddrTagList.\'$TargetAddrName\' s
>> "$TargetAddrName" 2>/d
>> ev/null
>>
>> snmpset -m all -v2c -c private 127.0.0.1
>> SNMP-TARGET-MIB::snmpTargetParamsRowStatus.\'$TargetAddrName\' i 5
>> 2>/dev/null
>> snmpset -m all -v2c -c private 127.0.0.1
>> SNMP-TARGET-MIB::snmpTargetParamsMPModel.\'$TargetAddrName\' i 1 2>/dev/null
>> snmpset -m all -v2c -c private 127.0.0.1
>> SNMP-TARGET-MIB::snmpTargetParamsSecurityModel.\'$TargetAddrName\' i 2
>> 2>/dev/null
>> snmpset -m all -v2c -c private 127.0.0.1
>> SNMP-TARGET-MIB::snmpTargetParamsSecurityName.\'$TargetAddrName\' s "public"
>> 2>/dev
>> /null
>> snmpset -m all -v2c -c private 127.0.0.1
>> SNMP-TARGET-MIB::snmpTargetParamsSecurityLevel.\'$TargetAddrName\' i 1
>> 2>/dev/null
>> snmpset -m all -v2c -c private 127.0.0.1
>> SNMP-TARGET-MIB::snmpTargetParamsStorageType.\'$TargetAddrName\' i 5
>> 2>/dev/null
>> snmpset -m all -v2c -c private 127.0.0.1
>> SNMP-TARGET-MIB::snmpTargetParamsRowStatus.\'$TargetAddrName\' i 1
>> 2>/dev/null
>> echo "added snmp target $TargetAddrName"
>> echo "walk on Target Table"
>> snmpwalk -m all -v2c -c public 127.0.0.1 .1.3.6.1.6.3.12.1.2 2>/dev/null
>> echo
>> echo "walk on notify table"
>> snmpwalk -m all -v2c -c public localhost .1.3.6.1.6.3.13.1.1 2>/dev/null
>> echo
>> echo "walk on target param tables"
>> snmpwalk -m all -v2c -c public localhost .1.3.6.1.6.3.12.1.3 2>/dev/null
>>
>>
> The response is:
>
>>  SNMP-NOTIFICATION-MIB::snmpNotifyRowStatus.'addr1' = INTEGER:
>> createAndWait(5)
>> SNMP-NOTIFICATION-MIB::snmpNotifyTag.'addr1' = STRING: addr1
>> SNMP-TARGET-MIB::snmpTargetAddrRowStatus.'addr1' = INTEGER:
>> createAndWait(5)
>>  SNMP-TARGET-MIB::snmpTargetAddrTDomain.'addr1' = OID:
>> SNMPv2-TM::snmpUDPDomain
>> SNMP-TARGET-MIB::snmpTargetAddrTAddress.'addr1' = STRING: "127.0.0.1:162"
>> SNMP-NOTIFICATION-MIB::snmpNotifyRowStatus.'addr1' = INTEGER: active(1)
>> SNMP-NOTIFICATION-MIB::snmpNotifyStorageType.'addr1' = INTEGER: other(1)
>> SNMP-TARGET-MIB::snmpTargetAddrParams.'addr1' = STRING: addr1
>> SNMP-TARGET-MIB::snmpTargetAddrRowStatus.'addr1' = INTEGER: active(1)
>>  SNMP-TARGET-MIB::snmpTargetAddrTagList.'addr1' = STRING: addr1
>> SNMP-TARGET-MIB::snmpTargetParamsRowStatus.'addr1' = INTEGER:
>> createAndWait(5)
>> SNMP-TARGET-MIB::snmpTargetParamsMPModel.'addr1' = INTEGER: 1
>>  SNMP-TARGET-MIB::snmpTargetParamsSecurityModel.'addr1' = INTEGER: 2
>> SNMP-TARGET-MIB::snmpTargetParamsSecurityName.'addr1' = STRING: public
>> SNMP-TARGET-MIB::snmpTargetParamsSecurityLevel.'addr1' = INTEGER:
>> noAuthNoPriv(1)
>>  SNMP-TARGET-MIB::snmpTargetParamsRowStatus.'addr1' = INTEGER: active(1)
>> added snmp target addr1
>> walk on Target Table
>> SNMP-TARGET-MIB::snmpTargetAddrTDomain.'addr1' = OID:
>> SNMPv2-TM::snmpUDPDomain
>>  SNMP-TARGET-MIB::snmpTargetAddrTAddress.'addr1' = STRING: "127.0.0.1:162
>> "
>> SNMP-TARGET-MIB::snmpTargetAddrTimeout.'addr1' = INTEGER: 1500
>> SNMP-TARGET-MIB::snmpTargetAddrRetryCount.'addr1' = INTEGER: 3
>>  SNMP-TARGET-MIB::snmpTargetAddrTagList.'addr1' = STRING: addr1
>> SNMP-TARGET-MIB::snmpTargetAddrParams.'addr1' = STRING: addr1
>> SNMP-TARGET-MIB::snmpTargetAddrStorageType.'addr1' = INTEGER:
>> nonVolatile(3)
>>  SNMP-TARGET-MIB::snmpTargetAddrRowStatus.'addr1' = INTEGER: active(1)
>>
>> walk on notify table
>> SNMP-NOTIFICATION-MIB::snmpNotifyTag.'addr1' = STRING: addr1
>> SNMP-NOTIFICATION-MIB::snmpNotifyType.'addr1' = INTEGER: trap(1)
>> SNMP-NOTIFICATION-MIB::snmpNotifyStorageType.'addr1' = INTEGER: other(1)
>> SNMP-NOTIFICATION-MIB::snmpNotifyRowStatus.'addr1' = INTEGER: active(1)
>>
>> walk on target param tables
>> SNMP-TARGET-MIB::snmpTargetParamsMPModel.'addr1' = INTEGER: 1
>>  SNMP-TARGET-MIB::snmpTargetParamsSecurityModel.'addr1' = INTEGER: 2
>> SNMP-TARGET-MIB::snmpTargetParamsSecurityName.'addr1' = STRING: public
>> SNMP-TARGET-MIB::snmpTargetParamsSecurityLevel.'addr1' = INTEGER:
>> noAuthNoPriv(1)
>>  SNMP-TARGET-MIB::snmpTargetParamsStorageType.'addr1' = INTEGER: 0
>> SNMP-TARGET-MIB::snmpTargetParamsRowStatus.'addr1' = INTEGER: active(1)
>>
>
> Thanks and Regards...
>
> --
> Rakesh P. Zingade
> +919420626099
>
> ------------------------------------------------------------------------------
> This SF.net Dev2Dev email is sponsored by:
>
> Show off your parallel programming skills.
> Enter the Intel(R) Threading Challenge 2010.
>
> http://p.sf.net/sfu/intel-thread-sfd_______________________________________________
> Net-snmp-users mailing list
> [email protected]
> Please see the following page to unsubscribe or change other options:
> https://lists.sourceforge.net/lists/listinfo/net-snmp-users
>
>
>


-- 
Rakesh P. Zingade
+919420626099

------------------------------------------------------------------------------
This SF.net Dev2Dev email is sponsored by:

Show off your parallel programming skills.
Enter the Intel(R) Threading Challenge 2010.
http://p.sf.net/sfu/intel-thread-sfd

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users